Remove dead UINT32_MAX branch from searchedTooLong

Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/6dad5b56-902e-4d0e-90c1-038a9c2df364

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.github/workflows/build_one_target.yml

@@ -4,14 +4,9 @@ on:
   workflow_dispatch:
     inputs:
       # trunk-ignore(checkov/CKV_GHA_7)
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
       arch:
         type: choice
         options:
-          - all
           - esp32
           - esp32s3
           - esp32c3
@@ -20,18 +15,32 @@ on:
           - rp2040
           - rp2350
           - stm32
-        description: Choose an arch to limit the search, or 'all' to search all architectures.
-        default: all
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
+      # find-target:
+      #   type: boolean
+      #   default: true
+      #   description: 'Find the available targets'
 
 permissions: read-all
 
 jobs:
   find-targets:
+    if: ${{ inputs.target == '' }}
     strategy:
       fail-fast: false
       matrix:
         arch:
-          - all
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v6
@@ -42,37 +51,14 @@ jobs:
       - run: pip install -U platformio
       - name: Generate matrix
         id: jsonStep
-        env:
-          BUILDTARGET: ${{ inputs.target }}
-          MATRIXARCH: ${{ inputs.arch }}
         run: |
           TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          if [ "$BUILDTARGET" = "" ]; then
-            echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-            echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-            echo "Arch: $MATRIXARCH" >> $GITHUB_STEP_SUMMARY
-            echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-            echo "## 🎯 The following target boards are available to build:" >> $GITHUB_STEP_SUMMARY
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo $TARGETS | jq -r 'sort_by(.board) | sort_by(.platform) |.[] | "| " + .platform + " | " + .board + " |" ' >> $GITHUB_STEP_SUMMARY
-          else
-            echo "We build this one:" >> $GITHUB_STEP_SUMMARY
-            ARCH=$(echo "$TARGETS" | jq --arg BUILDTARGET "$BUILDTARGET" -r '.[] | select(.board==$BUILDTARGET) | .platform')
-            echo "| Platform | Board |" >> $GITHUB_STEP_SUMMARY
-            echo "| -------- | ----- |" >> $GITHUB_STEP_SUMMARY
-            echo "| $ARCH | "$BUILDTARGET" |" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            if [[ "$ARCH" == "" ]]; then
-              echo "## ❌ Error: Target "$BUILDTARGET" not found!" >> $GITHUB_STEP_SUMMARY
-            else
-              echo "## ✅ Target "$BUILDTARGET" found, proceeding to build." >> $GITHUB_STEP_SUMMARY
-            fi
-            echo "You may need to refresh this page to make the built firmware appear below." >> $GITHUB_STEP_SUMMARY
-            echo "arch=$ARCH" >> $GITHUB_OUTPUT
-          fi
-    outputs:
-      arch: ${{ steps.jsonStep.outputs.arch }}
+          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
+          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Targets:" >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
@@ -92,12 +78,12 @@ jobs:
 
   build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version, find-targets]
+    needs: [version]
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
       pio_env: ${{ inputs.target }}
-      platform: ${{ needs.find-targets.outputs.arch }}
+      platform: ${{ inputs.arch }}
 
   gather-artifacts:
     permissions:

.github/workflows/test_native.yml

@@ -86,13 +86,7 @@ jobs:
         run: sed -i 's/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
 
       - name: PlatformIO Tests
-        run: |
-          set -o pipefail
-          # Filter out SKIPPED summary rows for hardware variants that can't run on the
-          # native host. They flood the log and make it harder to spot real failures.
-          # The JUnit XML is written directly to testreport.xml before the pipe, so
-          # the test artifact is unaffected.
-          platformio test -e coverage -v --junit-output-path testreport.xml 2>&1 | grep -v "[[:space:]]SKIPPED$"
+        run: platformio test -e coverage -v --junit-output-path testreport.xml
 
       - name: Save test results
         if: always() # run this step even if previous step failed

.trunk/trunk.yaml

@@ -9,7 +9,7 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.524
-    - renovate@43.139.6
+    - renovate@43.141.0
     - prettier@3.8.3
     - trufflehog@3.95.2
     - yamllint@1.38.0

bin/config.d/femtofox/femtofox_E80-900M2213S.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, HIGH, LOW]
-  MODE_TX: [HIGH, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  MODE_TX_HF: [LOW, LOW, LOW]
-  MODE_GNSS: [LOW, LOW, HIGH]
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_LR1121 generic.yaml

@@ -1,46 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins:
-    - DIO5
-    - DIO6
-  MODE_STBY:
-    - LOW
-    - LOW
-  MODE_RX:
-    - HIGH
-    - LOW
-  MODE_TX:
-    - HIGH
-    - HIGH
-  MODE_TX_HP:
-    - LOW
-    - HIGH
-  MODE_TX_HF:
-    - LOW
-    - LOW
-  MODE_GNSS:
-    - LOW
-    - LOW
-  MODE_WIFI:
-    - LOW
-    - LOW
-
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_WIO-LR1121.yaml

@@ -1,30 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-rfswitch_table:
-  pins: [DIO5, DIO6, DIO7]
-  MODE_STBY: [LOW, LOW, LOW]
-  MODE_RX: [LOW, LOW, LOW]
-  MODE_TX: [LOW, HIGH, LOW]
-  MODE_TX_HP: [HIGH, LOW, LOW]
-  # MODE_TX_HF: []
-  # MODE_GNSS: []
-  MODE_WIFI: [LOW, LOW, LOW]
-
-General:
-  MACAddressSource: eth0

bin/show-unmerged-prs.sh

@@ -0,0 +1,118 @@
+#!/bin/bash
+
+# Script to show commits in develop that are not in master
+# with their associated PR info and commit hashes
+# 
+# Usage:
+#   ./show-unmerged-prs.sh            # Show all unmerged commits
+#   ./show-unmerged-prs.sh --bugfix   # Show only bugfix-labeled PRs
+
+set -e
+
+REPO="firmware"
+OWNER="meshtastic"
+BASE_BRANCH="master"
+HEAD_BRANCH="develop"
+LIMIT=100
+FILTER_LABEL=""
+
+# Parse arguments
+for arg in "$@"; do
+    case $arg in
+        --bugfix)
+            FILTER_LABEL="bugfix"
+            shift
+            ;;
+        --feature)
+            FILTER_LABEL="feature"
+            shift
+            ;;
+        --help)
+            echo "Usage: $0 [OPTIONS]"
+            echo "Options:"
+            echo "  --bugfix     Show only PRs labeled with 'bugfix'"
+            echo "  --feature    Show only PRs labeled with 'feature'"
+            echo "  --help       Show this help message"
+            exit 0
+            ;;
+    esac
+done
+
+if [ -n "$FILTER_LABEL" ]; then
+    echo "Fetching commits in $HEAD_BRANCH that are not in $BASE_BRANCH (filtered by label: $FILTER_LABEL)..."
+else
+    echo "Fetching commits in $HEAD_BRANCH that are not in $BASE_BRANCH..."
+fi
+echo ""
+
+# Check if gh CLI is available
+if ! command -v gh &> /dev/null; then
+    echo "ERROR: GitHub CLI (gh) not found. Please install it first."
+    echo "Visit: https://cli.github.com/"
+    exit 1
+fi
+
+# Get commits in develop that are not in master
+# For each commit, try to find associated PR
+git fetch origin develop master 2>/dev/null || true
+
+# Use git to get the list of commits
+commits=$(git log --pretty=format:"%H|%s" origin/master..origin/develop | head -n $LIMIT)
+
+count=0
+displayed=0
+echo "Commits in $HEAD_BRANCH not in $BASE_BRANCH:"
+echo "=============================================="
+echo ""
+
+while IFS='|' read -r hash subject; do
+    ((count++))
+    
+    # Try to find the PR for this commit
+    # Extract PR number, title, description, and labels
+    pr_response=$(gh api -X GET "/repos/$OWNER/$REPO/commits/$hash/pulls" \
+        -H "Accept: application/vnd.github.v3+json" 2>/dev/null | \
+        jq -r '.[0] | "\(.number)|\(.title)|\(.body // "No description")|\(.labels | map(.name) | join(","))"' 2>/dev/null || echo "||||")
+    
+    if [ -z "$pr_response" ] || [ "$pr_response" = "||||" ]; then
+        # If no PR found, skip if filter is active, otherwise show the commit
+        if [ -z "$FILTER_LABEL" ]; then
+            ((displayed++))
+            echo "[$displayed] Commit: $hash"
+            echo "    Subject: $subject"
+            echo "    PR: Not found in GitHub"
+            echo ""
+        fi
+    else
+        IFS='|' read -r pr_num pr_title pr_desc pr_labels <<< "$pr_response"
+        
+        # Check if filter matches
+        if [ -n "$FILTER_LABEL" ]; then
+            # Only show if the label is in the labels list
+            if ! echo "$pr_labels" | grep -q "$FILTER_LABEL"; then
+                continue
+            fi
+        fi
+        
+        ((displayed++))
+        echo "[$displayed] PR #$pr_num - $pr_title"
+        echo "    Commit: $hash"
+        if [ -n "$pr_desc" ] && [ "$pr_desc" != "No description" ]; then
+            # Truncate description to 200 chars
+            desc_short="${pr_desc:0:200}"
+            [ ${#pr_desc} -gt 200 ] && desc_short+="..."
+            echo "    Description: $desc_short"
+        fi
+        if [ -n "$pr_labels" ] && [ "$pr_labels" != "" ]; then
+            echo "    Labels: $pr_labels"
+        fi
+        echo ""
+    fi
+done <<< "$commits"
+
+echo ""
+if [ -n "$FILTER_LABEL" ]; then
+    echo "Done. Showing $displayed PRs with label '$FILTER_LABEL' from $displayed commits checked."
+else
+    echo "Done. Showing $displayed commits from $HEAD_BRANCH not in $BASE_BRANCH."
+fi

platformio.ini

@@ -29,6 +29,7 @@ build_flags = -Wno-missing-field-initializers
 	-DUSE_THREAD_NAMES
 	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 	-DPB_ENABLE_MALLOC=1
+	-DPB_VALIDATE_UTF8=1
 	-DRADIOLIB_EXCLUDE_CC1101=1
 	-DRADIOLIB_EXCLUDE_NRF24=1
 	-DRADIOLIB_EXCLUDE_RF69=1
@@ -56,6 +57,7 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-DMESHTASTIC_EXCLUDE_POWERMON=1
+	-DMESHTASTIC_EXCLUDE_STATUS=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
@@ -66,7 +68,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/21e484f409cde18d44012caef84c244eb5ca28f3.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/6bfd1f135e1ebe37afd6050bb4b9964cea3fcfda.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -225,8 +227,6 @@ lib_deps =
 	https://github.com/Sensirion/arduino-i2c-sfa3x/archive/refs/tags/1.0.0.zip
 	# renovate: datasource=github-tags depName=Sensirion I2C SCD30 packageName=sensirion/arduino-i2c-scd30
 	https://github.com/Sensirion/arduino-i2c-scd30/archive/refs/tags/1.0.0.zip
-	# renovate: datasource=github-tags depName=arduino-sht packageName=sensirion/arduino-sht
-	https://github.com/Sensirion/arduino-sht/archive/refs/tags/v1.2.6.zip
 
 ; Environmental sensors with BSEC2 (Bosch proprietary IAQ)
 [environmental_extra]

src/DisplayFormatters.cpp

@@ -4,8 +4,7 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
                                                          bool usePreset)
 {
 
-    // If use_preset is false, always return "Custom" — callers such as RadioInterface and Channels
-    // rely on this being a stable literal for channel-name hashing and default-channel detection.
+    // If use_preset is false, always return "Custom"
     if (!usePreset) {
         return "Custom";
     }

src/Power.cpp

@@ -40,22 +40,6 @@
 #include "concurrency/LockGuard.h"
 #endif
 
-#if defined(ARCH_STM32WL) && defined(BATTERY_PIN)
-#include "stm32yyxx_ll_adc.h"
-
-/* Analog read resolution */
-#if defined(LL_ADC_RESOLUTION_12B)
-#define LL_ADC_RESOLUTION LL_ADC_RESOLUTION_12B
-#define BATTERY_SENSE_RESOLUTION_BITS 12
-#elif defined(LL_ADC_DS_DATA_WIDTH_12_BIT)
-#define LL_ADC_RESOLUTION LL_ADC_DS_DATA_WIDTH_12_BIT
-#define BATTERY_SENSE_RESOLUTION_BITS 12
-#else
-#error "ADC resolution could not be defined!"
-#endif
-#define ADC_RANGE (1 << BATTERY_SENSE_RESOLUTION_BITS)
-#endif
-
 #if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
@@ -68,7 +52,11 @@
 #define ETH ETH2
 #endif // HAS_ETHERNET
 
-#endif // MQTT
+#endif
+
+#ifndef DELAY_FOREVER
+#define DELAY_FOREVER portMAX_DELAY
+#endif
 
 #if defined(BATTERY_PIN) && defined(ARCH_ESP32)
 
@@ -90,6 +78,19 @@ static const adc_atten_t atten = ADC_ATTENUATION;
 #endif
 #endif // BATTERY_PIN && ARCH_ESP32
 
+#ifdef EXT_CHRG_DETECT
+#ifndef EXT_CHRG_DETECT_MODE
+static const uint8_t ext_chrg_detect_mode = INPUT;
+#else
+static const uint8_t ext_chrg_detect_mode = EXT_CHRG_DETECT_MODE;
+#endif
+#ifndef EXT_CHRG_DETECT_VALUE
+static const uint8_t ext_chrg_detect_value = HIGH;
+#else
+static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
+#endif
+#endif
+
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 #if __has_include(<Adafruit_INA219.h>)
 INA219Sensor ina219Sensor;
@@ -128,7 +129,7 @@ MAX17048Sensor max17048Sensor;
 NullSensor max17048Sensor;
 #endif
 #endif
-#endif // !MESHTASTIC_EXCLUDE_I2C
+#endif
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && HAS_RAKPROT
 RAK9154Sensor rak9154Sensor;
@@ -146,12 +147,46 @@ XPowersPPM *PPM = NULL;
 
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
+#else
+
+// Copy of the base class defined in axp20x.h.
+// I'd rather not include axp20x.h as it brings Wire dependency.
+class HasBatteryLevel
+{
+  public:
+    /**
+     * Battery state of charge, from 0 to 100 or -1 for unknown
+     */
+    virtual int getBatteryPercent() { return -1; }
+
+    /**
+     * The raw voltage of the battery or NAN if unknown
+     */
+    virtual uint16_t getBattVoltage() { return 0; }
+
+    /**
+     * return true if there is a battery installed in this unit
+     */
+    virtual bool isBatteryConnect() { return false; }
+
+    virtual bool isVbusIn() { return false; }
+    virtual bool isCharging() { return false; }
+};
 #endif
 
+bool pmu_irq = false;
+
 Power *power;
 
 using namespace meshtastic;
 
+// NRF52 has AREF_VOLTAGE defined in architecture.h but
+// make sure it's included. If something is wrong with NRF52
+// definition - compilation will fail on missing definition
+#if !defined(AREF_VOLTAGE) && !defined(ARCH_NRF52)
+#define AREF_VOLTAGE 3.3
+#endif
+
 /**
  * If this board has a battery level sensor, set this to a valid implementation
  */
@@ -194,7 +229,7 @@ static void battery_adcDisable()
 #endif
 }
 
-#endif // BATTERY_PIN
+#endif
 
 /**
  * A simple battery level sensor that assumes the battery voltage is attached
@@ -253,7 +288,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 
     /**
-     * The raw voltage of the battery in millivolts or NAN if unknown
+     * The raw voltage of the batteryin millivolts or NAN if unknown
      */
     virtual uint16_t getBattVoltage() override
     {
@@ -270,6 +305,16 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif
 
+#ifndef ADC_MULTIPLIER
+#define ADC_MULTIPLIER 2.0
+#endif
+
+#ifndef BATTERY_SENSE_SAMPLES
+#define BATTERY_SENSE_SAMPLES                                                                                                    \
+    15 // Set the number of samples, it has an effect of increasing sensitivity in
+       // complex electromagnetic environment.
+#endif
+
 #ifdef BATTERY_PIN
         // Override variant or default ADC_MULTIPLIER if we have the override pref
         float operativeAdcMultiplier =
@@ -283,17 +328,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
             float scaled = 0;
 
             battery_adcEnable();
-#ifdef ARCH_STM32WL
-            // STM32 ADC with VREFINT runtime calibration
-            Vref = __LL_ADC_CALC_VREFANALOG_VOLTAGE(analogRead(AVREF), LL_ADC_RESOLUTION);
-            raw = analogRead(BATTERY_PIN);
-            scaled = __LL_ADC_CALC_DATA_TO_VOLTAGE(Vref, raw, LL_ADC_RESOLUTION);
-            scaled *= operativeAdcMultiplier;
-#elif defined(ARCH_ESP32) // ADC block for espressif platforms
+#ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
-#else                     // block for all other platforms
+#else // block for all other platforms
 #ifdef ARCH_NRF52
             concurrency::LockGuard saadcGuard(concurrency::nrf52SaadcLock);
 #endif
@@ -408,14 +447,28 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 #endif
 
-    // Detect if an external power source is connected if we don’t have a PMIC;
-    // Firstly prefer EXT_PWR_DETECT GPIO if available,
-    // secondly try an nRF52-specific routine on some variants,
-    // lastly provide a fallback to indicate external power when fully charged.
+    /// If we see a battery voltage higher than physics allows - assume charger is
+    /// pumping in power On some boards we don't have the power management chip
+    /// (like AXPxxxx) so we use EXT_PWR_DETECT GPIO pin to detect external power
+    /// source
     virtual bool isVbusIn() override
     {
 #ifdef EXT_PWR_DETECT
-        return digitalRead(EXT_PWR_DETECT) == EXT_PWR_DETECT_VALUE;
+#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+        // if external powered that pin will be pulled down
+        if (digitalRead(EXT_PWR_DETECT) == LOW) {
+            return true;
+        }
+        // if it's not LOW - check the battery
+#else
+        // if external powered that pin will be pulled up
+        if (digitalRead(EXT_PWR_DETECT) == HIGH) {
+            return true;
+        }
+        // if it's not HIGH - check the battery
+#endif
+        // If we have an EXT_PWR_DETECT pin and it indicates no external power, believe it.
+        return false;
 
 // technically speaking this should work for all(?) NRF52 boards
 // but needs testing across multiple devices. NRF52 USB would not even work if
@@ -436,9 +489,9 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif
 #if defined(ELECROW_ThinkNode_M6)
-        return digitalRead(EXT_CHRG_DETECT) == EXT_CHRG_DETECT_VALUE || isVbusIn();
+        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value || isVbusIn();
 #elif EXT_CHRG_DETECT
-        return digitalRead(EXT_CHRG_DETECT) == EXT_CHRG_DETECT_VALUE;
+        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #elif defined(BATTERY_CHARGING_INV)
         return !digitalRead(BATTERY_CHARGING_INV);
 #else
@@ -477,11 +530,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
     bool initial_read_done = false;
     float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
-#ifdef ARCH_STM32WL
-    // 3300mV placeholder for STM32 errata where VREFINT factory calibration may be missing
-    // (e.g. STM32U0, see DS14756 Rev 3 §2.4.1 "VREFINT offset")
-    uint32_t Vref = 3300;
-#endif
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT)
 
@@ -571,10 +619,14 @@ Power::Power() : OSThread("Power")
 bool Power::analogInit()
 {
 #ifdef EXT_PWR_DETECT
-    pinMode(EXT_PWR_DETECT, EXT_PWR_DETECT_MODE);
+#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+    pinMode(EXT_PWR_DETECT, INPUT_PULLUP);
+#else
+    pinMode(EXT_PWR_DETECT, INPUT);
+#endif
 #endif
 #ifdef EXT_CHRG_DETECT
-    pinMode(EXT_CHRG_DETECT, EXT_CHRG_DETECT_MODE);
+    pinMode(EXT_CHRG_DETECT, ext_chrg_detect_mode);
 #endif
 
 #ifdef BATTERY_PIN
@@ -587,9 +639,7 @@ bool Power::analogInit()
 #define BATTERY_SENSE_RESOLUTION_BITS 10
 #endif
 
-#ifdef ARCH_STM32WL
-    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
-#elif defined(ARCH_ESP32) // ESP32 needs special analog stuff
+#ifdef ARCH_ESP32 // ESP32 needs special analog stuff
 
 #ifndef ADC_WIDTH // max resolution by default
     static const adc_bits_width_t width = ADC_WIDTH_BIT_12;
@@ -599,7 +649,7 @@ bool Power::analogInit()
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
     adc1_config_width(width);
     adc1_config_channel_atten(adc_channel, atten);
-#else                        // ADC2
+#else // ADC2
     adc2_config_channel_atten(adc_channel, atten);
 #ifndef CONFIG_IDF_TARGET_ESP32S3
     // ADC2 wifi bug workaround
@@ -629,7 +679,7 @@ bool Power::analogInit()
 
     // NRF52 ADC init moved to powerHAL_init in nrf52 platform
 
-#if !defined(ARCH_ESP32) && !defined(ARCH_STM32WL)
+#ifndef ARCH_ESP32
     analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
 #endif
 
@@ -924,14 +974,6 @@ int32_t Power::runOnce()
             powerFSM.trigger(EVENT_POWER_CONNECTED);
         }
 
-#ifdef PMU_POWER_BUTTON_IS_CANCEL
-        // cancel action also turns the screen on and off.
-        if (PMU->isPekeyShortPressIrq()) {
-            LOG_INFO("Input: Corona Button Click");
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_CANCEL, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        }
-#endif
         /*
         Other things we could check if we cared...
 
@@ -948,6 +990,13 @@ int32_t Power::runOnce()
             LOG_DEBUG("Battery removed");
         }
         */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
+        if (PMU->isPekeyLongPressIrq()) {
+            LOG_DEBUG("PEK long button press");
+            if (screen)
+                screen->setOn(false);
+        }
+#endif
 
         PMU->clearIrqStatus();
     }
@@ -1016,8 +1065,8 @@ void Power::attachPowerInterrupts()
     if (PMU) {
         attachInterrupt(
             PMU_IRQ,
-            []() {
-                power->pmu_irq = true;
+            [] {
+                pmu_irq = true;
                 power->setIntervalFromNow(0);
                 runASAP = true;
             },
@@ -1319,16 +1368,19 @@ bool Power::axpChipInit()
     uint64_t pmuIrqMask = 0;
 
     if (PMU->getChipModel() == XPOWERS_AXP192) {
-        pmuIrqMask = XPOWERS_AXP192_VBUS_INSERT_IRQ | XPOWERS_AXP192_VBUS_REMOVE_IRQ | XPOWERS_AXP192_PKEY_SHORT_IRQ;
+        pmuIrqMask = XPOWERS_AXP192_VBUS_INSERT_IRQ | XPOWERS_AXP192_BAT_INSERT_IRQ | XPOWERS_AXP192_PKEY_SHORT_IRQ;
     } else if (PMU->getChipModel() == XPOWERS_AXP2101) {
-        pmuIrqMask = XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_VBUS_REMOVE_IRQ | XPOWERS_AXP2101_PKEY_SHORT_IRQ;
+        pmuIrqMask = XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_BAT_INSERT_IRQ | XPOWERS_AXP2101_PKEY_SHORT_IRQ;
     }
 
     pinMode(PMU_IRQ, INPUT);
 
-    // We wake on IRQ, so only enable the IRQs that we care about.
-    // we want USB plug and unplug to update the screen and LED status,
-    // and short press on the power button to trigger the "cancel" action in the UI (which also turns the screen on and off).
+    // we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ
+    // because it occurs repeatedly while there is no battery also it could cause
+    // inadvertent waking from light sleep just because the battery filled we
+    // don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while
+    // no battery installed we don't look at AXPXXX_VBUS_REMOVED_IRQ because we
+    // don't have anything hooked to vbus
     PMU->enableIRQ(pmuIrqMask);
 
     PMU->clearIrqStatus();
@@ -1636,7 +1688,7 @@ bool Power::lipoChargerInit()
     return true;
 }
 
-#else  // HAS_PPM
+#else
 /**
  * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
  */
@@ -1644,7 +1696,7 @@ bool Power::lipoChargerInit()
 {
     return false;
 }
-#endif // HAS_PPM
+#endif
 
 #ifdef HELTEC_MESH_SOLAR
 #include "meshSolarApp.h"
@@ -1706,7 +1758,7 @@ bool Power::meshSolarInit()
     return true;
 }
 
-#else  // HELTEC_MESH_SOLAR
+#else
 /**
  * The meshSolar battery level sensor is unavailable - default to
  * AnalogBatteryLevel
@@ -1715,7 +1767,7 @@ bool Power::meshSolarInit()
 {
     return false;
 }
-#endif // HELTEC_MESH_SOLAR
+#endif
 
 #ifdef HAS_SERIAL_BATTERY_LEVEL
 #include <SoftwareSerial.h>
@@ -1723,7 +1775,7 @@ bool Power::meshSolarInit()
 /**
  * SerialBatteryLevel class for pulling battery information from a secondary MCU over serial.
  */
-class SerialBatteryLevel : public AnalogBatteryLevel
+class SerialBatteryLevel : public HasBatteryLevel
 {
 
   public:
@@ -1794,12 +1846,22 @@ class SerialBatteryLevel : public AnalogBatteryLevel
     {
 #if defined(EXT_CHRG_DETECT)
 
-        return digitalRead(EXT_CHRG_DETECT) == EXT_CHRG_DETECT_VALUE;
+        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 
 #endif
         return false;
     }
 
+    virtual bool isCharging() override
+    {
+#ifdef EXT_CHRG_DETECT
+        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+
+#endif
+        // by default, we check the battery voltage only
+        return isVbusIn();
+    }
+
   private:
     SoftwareSerial BatterySerial = SoftwareSerial(SERIAL_BATTERY_RX, SERIAL_BATTERY_TX);
     uint8_t Data[6] = {0};
@@ -1815,10 +1877,10 @@ SerialBatteryLevel serialBatteryLevel;
 bool Power::serialBatteryInit()
 {
 #ifdef EXT_PWR_DETECT
-    pinMode(EXT_PWR_DETECT, EXT_PWR_DETECT_MODE);
+    pinMode(EXT_PWR_DETECT, INPUT);
 #endif
 #ifdef EXT_CHRG_DETECT
-    pinMode(EXT_CHRG_DETECT, EXT_CHRG_DETECT_MODE);
+    pinMode(EXT_CHRG_DETECT, ext_chrg_detect_mode);
 #endif
 
     bool result = serialBatteryLevel.runOnce();
@@ -1829,7 +1891,7 @@ bool Power::serialBatteryInit()
     return true;
 }
 
-#else  // HAS_SERIAL_BATTERY_LEVEL
+#else
 /**
  * If this device has no serial battery level sensor, don't try to use it.
  */
@@ -1837,4 +1899,4 @@ bool Power::serialBatteryInit()
 {
     return false;
 }
-#endif // HAS_SERIAL_BATTERY_LEVEL
+#endif

src/RedirectablePrint.cpp

@@ -137,7 +137,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| %02d:%02d:%02d %u.%03u ", hour, min, sec, millis() / 1000, millis() % 1000);
+        ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #else
         printf("%s ", logLevel);
         if (color) {
@@ -151,7 +151,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         if (color) {
             ::printf("\u001b[0m");
         }
-        ::printf("| ??:??:?? %u.%03u ", millis() / 1000, millis() % 1000);
+        ::printf("| ??:??:?? %u ", millis() / 1000);
 #else
         printf("%s ", logLevel);
         if (color) {

src/SerialConsole.cpp

@@ -30,9 +30,6 @@ SerialConsole *console;
 
 void consoleInit()
 {
-    if (console) {
-        return;
-    }
     auto sc = new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
 
 #if defined(SERIAL_HAS_ON_RECEIVE)

src/airtime.h

@@ -19,8 +19,8 @@
 
   TX_LOG + RX_LOG = Total air time for a particular meshtastic channel.
 
-  TX_LOG + RX_ALL_LOG = Total air time for a particular meshtastic channel, including
-                        other lora radios.
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel, including
+                    other lora radios.
 
   RX_ALL_LOG - RX_LOG = Other lora radios on our frequency channel.
 */

src/configuration.h

@@ -78,11 +78,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Configuration
 // -----------------------------------------------------------------------------
 
-// Pre-hop drop handling (compile-time flag).
-#ifndef MESHTASTIC_PREHOP_DROP
-#define MESHTASTIC_PREHOP_DROP 0
-#endif
-
 /// Convert a preprocessor name into a quoted string
 #define xstr(s) ystr(s)
 #define ystr(s) #s
@@ -231,7 +226,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BME_ADDR 0x76
 #define BME_ADDR_ALTERNATE 0x77
 #define MCP9808_ADDR 0x18
-#define INA_ADDR 0x40 // same as SHT2X
+#define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
 #define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
@@ -244,8 +239,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SFA30_ADDR 0x5D
-#define SHTXX_ADDR 0x44
-#define SHTXX_ADDR_ALT 0x45
+#define SHT31_4x_ADDR 0x44
+#define SHT31_4x_ADDR_ALT 0x45
 #define PMSA003I_ADDR 0x12
 #define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38
@@ -499,7 +494,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_PKI 1
 #define MESHTASTIC_EXCLUDE_POWER_FSM 1
 #define MESHTASTIC_EXCLUDE_TZ 1
-#define MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH 1
 #endif
 
 // Turn off all optional modules
@@ -516,7 +510,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
 #define MESHTASTIC_EXCLUDE_STOREFORWARD 1
 #define MESHTASTIC_EXCLUDE_TEXTMESSAGE 1
-#define MESHTASTIC_EXCLUDE_TRAFFIC_MANAGEMENT 1
 #define MESHTASTIC_EXCLUDE_ATAK 1
 #define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
 #define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1

src/detect/ScanI2CTwoWire.cpp

@@ -136,9 +136,7 @@ bool ScanI2CTwoWire::i2cCommandResponseLength(ScanI2C::DeviceAddress addr, uint1
     return match;
 }
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
-// FIXME Move to a separate file for detection of sensors that require more complex interactions?
-// For SEN5X detection
+/// for SEN5X detection
 // Note, this code needs to be called before setting the I2C bus speed
 // for the screen at high speed. The speed needs to be at 100kHz, otherwise
 // detection will not work
@@ -176,46 +174,6 @@ String readSEN5xProductName(TwoWire *i2cBus, uint8_t address)
 
     return String(productName);
 }
-#endif
-
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-bool detectSHT21SerialNumber(TwoWire *i2cBus, uint8_t address)
-{
-
-    i2cBus->beginTransmission(address);
-    i2cBus->write(0xFA);
-    i2cBus->write(0x0F);
-
-    if (i2cBus->endTransmission() != 0)
-        return false;
-
-    if (i2cBus->requestFrom(address, (uint8_t)8) != 8)
-        return false;
-
-    // Just flush the data
-    while (i2cBus->available() < 8) {
-        i2cBus->read();
-    }
-
-    i2cBus->beginTransmission(address);
-    i2cBus->write(0xFC);
-    i2cBus->write(0xC9);
-
-    if (i2cBus->endTransmission() != 0)
-        return false;
-
-    if (i2cBus->requestFrom(address, (uint8_t)6) != 6)
-        return false;
-
-    // Just flush the data
-    while (i2cBus->available() < 6) {
-        i2cBus->read();
-    }
-
-    // Assume we detect the SHT21 if something came back from the request
-    return true;
-}
-#endif
 
 #define SCAN_SIMPLE_CASE(ADDR, T, ...)                                                                                           \
     case ADDR:                                                                                                                   \
@@ -413,47 +371,27 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 #endif
 #if !defined(M5STACK_UNITC6L)
-            case INA_ADDR: // Same as SHT2X
+            case INA_ADDR:
             case INA_ADDR_ALTERNATE:
-            case INA_ADDR_WAVESHARE_UPS: {
-                uint16_t mfg = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+            case INA_ADDR_WAVESHARE_UPS:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+                LOG_DEBUG("Register MFG_UID: 0x%x", registerValue);
+                if (registerValue == 0x5449) {
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 2);
+                    LOG_DEBUG("Register DIE_UID: 0x%x", registerValue);
 
-                LOG_DEBUG("Register MFG_UID: 0x%x", mfg);
-
-                // Only read DIE_UID for vendors we recognize as INA-compatible to avoid
-                // an extra I2C transaction + delay on other devices sharing this address.
-                if (mfg == 0x5449 || mfg == 0x190F) {
-                    uint16_t die = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 2);
-                    LOG_DEBUG("Register DIE_UID: 0x%x", die);
-
-                    // TI INA226 or fully compatible clones (e.g. TPA626)
-                    if (mfg == 0x5449 && die == 0x2260) {
+                    if (registerValue == 0x2260) {
                         logFoundDevice("INA226", (uint8_t)addr.address);
                         type = INA226;
-                    }
-                    // Silergy SQ52201 (INA226-compatible with different IDs)
-                    else if (mfg == 0x190F && die == 0x0000) {
-                        logFoundDevice("INA226 (SQ52201)", (uint8_t)addr.address);
-                        type = INA226;
-                    }
-                    // TI INA260
-                    else if (mfg == 0x5449) {
+                    } else {
                         logFoundDevice("INA260", (uint8_t)addr.address);
                         type = INA260;
                     }
-                }
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-                if (type == NONE && detectSHT21SerialNumber(i2cBus, (uint8_t)addr.address)) {
-                    logFoundDevice("SHTXX (SHT2X)", (uint8_t)addr.address);
-                    type = SHTXX;
-                }
-#endif
-                else { // Assume INA219 if none of the above ones are found
+                } else { // Assume INA219 if INA260 ID is not found
                     logFoundDevice("INA219", (uint8_t)addr.address);
                     type = INA219;
                 }
                 break;
-            }
             case INA3221_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
                 LOG_DEBUG("Register MFG_UID FE: 0x%x", registerValue);
@@ -510,19 +448,22 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     }
                     break;
                 }
-            case SHTXX_ADDR:     // same as OPT3001_ADDR_ALT
-            case SHTXX_ADDR_ALT: // same as OPT3001_ADDR
+            case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
+            case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
                 if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else { // SHTXX
-                    type = SHTXX;
-                    logFoundDevice("SHTXX", (uint8_t)addr.address);
+                } else if (i2cCommandResponseLength(addr, 0x89, 6)) { // SHT4x serial number (6 bytes inc. CRC)
+                    type = SHT4X;
+                    logFoundDevice("SHT4X", (uint8_t)addr.address);
+                } else {
+                    type = SHT31;
+                    logFoundDevice("SHT31", (uint8_t)addr.address);
                 }
 
                 break;
 
-                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTXX, "SHTXX", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3", (uint8_t)addr.address)
             case RCWL9620_ADDR:
                 // get MAX30102 PARTID
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 1);
@@ -758,7 +699,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BMX160", (uint8_t)addr.address);
                     break;
                 } else {
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR
                     String prod = "";
                     prod = readSEN5xProductName(i2cBus, addr.address);
                     if (prod.startsWith("SEN55")) {
@@ -774,7 +714,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                         logFoundDevice("Sensirion SEN50", addr.address);
                         break;
                     }
-#endif
                     if (addr.address == BMX160_ADDR) {
                         type = BMX160;
                         logFoundDevice("BMX160", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -103,14 +103,6 @@ static int32_t gpsSwitch()
     if (gps) {
         int currentState = digitalRead(PIN_GPS_SWITCH);
 
-        // Respect explicit NOT_PRESENT mode and do not let the hardware switch re-enable GPS.
-        if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
-            gps->disable();
-            lastState = currentState;
-            firstrun = false;
-            return 1000;
-        }
-
         // if the switch is set to zero, disable the GPS Thread
         if (firstrun)
             if (currentState == LOW)

src/gps/GPSUpdateScheduling.cpp

@@ -70,20 +70,25 @@ bool GPSUpdateScheduling::isUpdateDue()
 // Have we been searching for a GPS position for too long?
 bool GPSUpdateScheduling::searchedTooLong()
 {
+    constexpr uint32_t oneMinuteMs = 60UL * 1000UL;
+    constexpr uint32_t maxSearchClampMs = 15UL * oneMinuteMs; // Hard cap: 15 minutes is always too long
+    uint32_t elapsed = elapsedSearchMs();
+
+    // Anything over 15 minutes is too long, regardless of the broadcast interval.
+    // TODO: Make a smarter algorithm that backs off the search dwell time when not getting a lock.
+    if (elapsed > maxSearchClampMs)
+        return true;
+
     uint32_t minimumOrConfiguredSecs =
         Default::getConfiguredOrMinimumValue(config.position.position_broadcast_secs, default_broadcast_interval_secs);
     uint32_t maxSearchMs = Default::getConfiguredOrDefaultMs(minimumOrConfiguredSecs, default_broadcast_interval_secs);
-    // If broadcast interval set to max, no such thing as "too long"
-    if (maxSearchMs == UINT32_MAX)
-        return false;
 
     // If we've been searching longer than our position broadcast interval: that's too long
-    else if (elapsedSearchMs() > maxSearchMs)
+    if (elapsed > maxSearchMs)
         return true;
 
     // Otherwise, not too long yet!
-    else
-        return false;
+    return false;
 }
 
 // Updates the predicted time-to-get-lock, by exponentially smoothing the latest observation

src/graphics/Screen.cpp

@@ -60,7 +60,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "mesh/Channels.h"
-#include "mesh/Default.h"
 #include "mesh/generated/meshtastic/deviceonly.pb.h"
 #include "modules/ExternalNotificationModule.h"
 #include "modules/TextMessageModule.h"
@@ -99,7 +98,6 @@ namespace graphics
 
 // This means the *visible* area (sh1106 can address 132, but shows 128 for example)
 #define IDLE_FRAMERATE 1 // in fps
-#define COMPASS_ACTIVE_FRAMERATE 20
 
 // DEBUG
 #define NUM_EXTRA_FRAMES 3 // text message and debug frame
@@ -137,60 +135,6 @@ static bool heartbeat = false;
 
 extern bool hasUnreadMessage;
 
-static inline float wrapHeading360(float heading)
-{
-    if (heading < 0.0f) {
-        heading += 360.0f;
-    } else if (heading >= 360.0f) {
-        heading -= 360.0f;
-    }
-    return heading;
-}
-
-void Screen::setHeading(float heading)
-{
-    const float wrappedHeading = wrapHeading360(heading);
-
-    if (!hasCompass) {
-        hasCompass = true;
-        compassHeading = wrappedHeading;
-        return;
-    }
-
-    // Interpolate using shortest-path angular delta to avoid jumps around 0/360.
-    float delta = wrappedHeading - compassHeading;
-    if (delta > 180.0f) {
-        delta -= 360.0f;
-    } else if (delta < -180.0f) {
-        delta += 360.0f;
-    }
-
-    // Adaptive filtering:
-    // - Strong damping for tiny deltas (jitter)
-    // - Faster response for larger turns
-    const float absDelta = (delta >= 0.0f) ? delta : -delta;
-    if (absDelta < 1.0f) {
-        return;
-    }
-
-    float alpha = 0.35f;
-    if (absDelta > 25.0f) {
-        alpha = 0.85f;
-    } else if (absDelta > 10.0f) {
-        alpha = 0.65f;
-    }
-
-    float step = delta * alpha;
-    const float maxStep = 12.0f;
-    if (step > maxStep) {
-        step = maxStep;
-    } else if (step < -maxStep) {
-        step = -maxStep;
-    }
-
-    compassHeading = wrapHeading360(compassHeading + step);
-}
-
 // ==============================
 // Overlay Alert Banner Renderer
 // ==============================
@@ -328,25 +272,10 @@ static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int
 float Screen::estimatedHeading(double lat, double lon)
 {
     static double oldLat, oldLon;
-    static float b = -1.0f;
-    static uint32_t lastHeadingAtMs = 0;
-    const uint32_t now = millis();
-    const uint32_t gpsUpdateIntervalSecs =
-        Default::getConfiguredOrDefault(config.position.gps_update_interval, default_gps_update_interval);
-    uint32_t effectiveUpdateIntervalSecs = gpsUpdateIntervalSecs;
-    if (config.position.position_broadcast_smart_enabled) {
-        const uint32_t smartMinIntervalSecs = Default::getConfiguredOrDefault(
-            config.position.broadcast_smart_minimum_interval_secs, default_broadcast_smart_minimum_interval_secs);
-        if (smartMinIntervalSecs > effectiveUpdateIntervalSecs) {
-            effectiveUpdateIntervalSecs = smartMinIntervalSecs;
-        }
-    }
-    // Two expected update windows; keep arithmetic 32-bit to avoid pulling in larger 64-bit helpers.
-    const uint32_t headingStaleMs =
-        (effectiveUpdateIntervalSecs > (UINT32_MAX / 2000U)) ? UINT32_MAX : (effectiveUpdateIntervalSecs * 2000U);
+    static float b;
 
     if (oldLat == 0) {
-        // Need at least two position points before we can infer heading.
+        // just prepare for next time
         oldLat = lat;
         oldLon = lon;
 
@@ -354,20 +283,12 @@ float Screen::estimatedHeading(double lat, double lon)
     }
 
     float d = GeoCoord::latLongToMeter(oldLat, oldLon, lat, lon);
-    if (d < 10) { // haven't moved enough, keep previous heading (invalid until first real movement)
-        if (lastHeadingAtMs != 0 && (now - lastHeadingAtMs) >= headingStaleMs) {
-            // Heading is stale after prolonged no-movement; force reacquire.
-            b = -1.0f;
-            oldLat = lat;
-            oldLon = lon;
-        }
+    if (d < 10) // haven't moved enough, just keep current bearing
         return b;
-    }
 
     b = GeoCoord::bearing(oldLat, oldLon, lat, lon) * RAD_TO_DEG;
     oldLat = lat;
     oldLon = lon;
-    lastHeadingAtMs = now;
 
     return b;
 }
@@ -1002,22 +923,9 @@ int32_t Screen::runOnce()
     // but we should only call setTargetFPS when framestate changes, because
     // otherwise that breaks animations.
 
-    uint32_t desiredFramerate = IDLE_FRAMERATE;
-#if HAS_GPS && !defined(USE_EINK)
-    if (showingNormalScreen && hasCompass) {
-        const uint8_t currentFrame = ui->getUiState()->currentFrame;
-        if ((framesetInfo.positions.gps != 255 && currentFrame == framesetInfo.positions.gps) ||
-            (framesetInfo.positions.waypoint != 255 && currentFrame == framesetInfo.positions.waypoint) ||
-            (framesetInfo.positions.firstFavorite != 255 && currentFrame >= framesetInfo.positions.firstFavorite &&
-             currentFrame <= framesetInfo.positions.lastFavorite)) {
-            desiredFramerate = COMPASS_ACTIVE_FRAMERATE;
-        }
-    }
-#endif
-
-    if (targetFramerate != desiredFramerate && ui->getUiState()->frameState == FIXED) {
+    if (targetFramerate != IDLE_FRAMERATE && ui->getUiState()->frameState == FIXED) {
         // oldFrameState = ui->getUiState()->frameState;
-        targetFramerate = desiredFramerate;
+        targetFramerate = IDLE_FRAMERATE;
 
         ui->setTargetFPS(targetFramerate);
         forceDisplay();
@@ -1289,7 +1197,7 @@ void Screen::setFrames(FrameFocus focus)
         for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
             const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
             if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
-                favoriteFrames.push_back(graphics::UIRenderer::drawFavoriteNode);
+                favoriteFrames.push_back(graphics::UIRenderer::drawNodeInfo);
             }
         }
 
@@ -1318,7 +1226,7 @@ void Screen::setFrames(FrameFocus focus)
     static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
     ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
 
-    prevFrame = -1; // Force drawFavoriteNode to pick a new node (because our list just changed)
+    prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list just changed)
 
     // Focus on a specific frame, in the frame set we just created
     switch (focus) {

src/graphics/Screen.h

@@ -330,11 +330,15 @@ class Screen : public concurrency::OSThread
 
     // Function to allow the AccelerometerThread to set the heading if a sensor provides it
     // Mutex needed?
-    void setHeading(float heading);
+    void setHeading(long _heading)
+    {
+        hasCompass = true;
+        compassHeading = fmod(_heading, 360);
+    }
 
     bool hasHeading() { return hasCompass; }
 
-    float getHeading() { return compassHeading; }
+    long getHeading() { return compassHeading; }
 
     void setEndCalibration(uint32_t _endCalibrationAt) { endCalibrationAt = _endCalibrationAt; }
     uint32_t getEndCalibration() { return endCalibrationAt; }
@@ -788,4 +792,4 @@ extern std::vector<std::string> functionSymbol;
 extern std::string functionSymbolString;
 extern graphics::Screen *screen;
 
-#endif
+#endif

src/graphics/TFTDisplay.cpp

@@ -1254,14 +1254,14 @@ void TFTDisplay::display(bool fromBlank)
 
         // Did we find a pixel that needs updating on this row?
         if (x_FirstPixelUpdate < displayWidth) {
-            // Align the first pixel for update to an even number so the total alignment of
-            // the data will be at 32-bit boundary, which is required by GDMA SPI transfers.
-            x_FirstPixelUpdate &= ~1;
 
-            // Step 3a: copy rest of the pixels in this row into the pixel line buffer,
-            // while also recording the last pixel in the row that needs updating.
-            // Since the first changed pixel will be looked up, the x_LastPixelUpdate will be set.
-            for (x = x_FirstPixelUpdate; x < displayWidth; x++) {
+            // Quickly write out the first changed pixel (saves another array lookup)
+            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
+            x_LastPixelUpdate = x_FirstPixelUpdate;
+
+            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
+            // while also recording the last pixel in the row that needs updating
+            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
                 isset = buffer[x + y_byteIndex] & y_byteMask;
                 linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
 
@@ -1274,14 +1274,6 @@ void TFTDisplay::display(bool fromBlank)
                     x_LastPixelUpdate = x;
                 }
             }
-            // Step 3b: Round up the last pixel to odd number to maintain 32-bit alignment for SPIs.
-            // Most displays will have even number of pixels in a row -- this will be in bounds
-            // of the displayWidth. (Hopefully odd displays will just ignore that extra pixel.)
-            x_LastPixelUpdate |= 1;
-            // Ensure the last pixel index does not exceed the display width.
-            if (x_LastPixelUpdate >= displayWidth) {
-                x_LastPixelUpdate = displayWidth - 1;
-            }
 #if defined(HACKADAY_COMMUNICATOR)
             tft->draw16bitBeRGBBitmap(x_FirstPixelUpdate, y, &linePixelBuffer[x_FirstPixelUpdate],
                                       (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1);

src/graphics/draw/CompassRenderer.cpp

@@ -1,6 +1,10 @@
 #include "configuration.h"
 #if HAS_SCREEN
 #include "CompassRenderer.h"
+#include "NodeDB.h"
+#include "UIRenderer.h"
+#include "configuration.h"
+#include "gps/GeoCoord.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
 #include <cmath>
@@ -17,8 +21,8 @@ struct Point {
 
     void rotate(float angle)
     {
-        float cos_a = cosf(angle);
-        float sin_a = sinf(angle);
+        float cos_a = cos(angle);
+        float sin_a = sin(angle);
         float new_x = x * cos_a - y * sin_a;
         float new_y = x * sin_a + y * cos_a;
         x = new_x;
@@ -47,30 +51,21 @@ void drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t compassY,
     if (currentResolution == ScreenResolution::High) {
         radius += 4;
     }
-    float northX = 0.0f;
-    float northY = -radius;
-    if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING) {
-        const float c = cosf(-myHeading);
-        const float s = sinf(-myHeading);
-        const float rx = northX * c - northY * s;
-        const float ry = northX * s + northY * c;
-        northX = rx;
-        northY = ry;
-    }
-    northX += compassX;
-    northY += compassY;
+    Point north(0, -radius);
+    if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
+        north.rotate(-myHeading);
+    north.translate(compassX, compassY);
 
     display->setFont(FONT_SMALL);
     display->setTextAlignment(TEXT_ALIGN_CENTER);
     display->setColor(BLACK);
-    const int16_t nLabelWidth = display->getStringWidth("N");
     if (currentResolution == ScreenResolution::High) {
-        display->fillRect(northX - 8, northY - 1, nLabelWidth + 3, FONT_HEIGHT_SMALL - 6);
+        display->fillRect(north.x - 8, north.y - 1, display->getStringWidth("N") + 3, FONT_HEIGHT_SMALL - 6);
     } else {
-        display->fillRect(northX - 4, northY - 1, nLabelWidth + 2, FONT_HEIGHT_SMALL - 6);
+        display->fillRect(north.x - 4, north.y - 1, display->getStringWidth("N") + 2, FONT_HEIGHT_SMALL - 6);
     }
     display->setColor(WHITE);
-    display->drawString(northX, northY - 3, "N");
+    display->drawString(north.x, north.y - 3, "N");
 }
 
 void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, uint16_t compassDiam, float headingRadian)
@@ -118,46 +113,11 @@ void drawArrowToNode(OLEDDisplay *display, int16_t x, int16_t y, int16_t size, f
     display->fillTriangle(tip.x, tip.y, right.x, right.y, tail.x, tail.y);
 }
 
-bool getHeadingRadians(double lat, double lon, float &headingRadian)
+float estimatedHeading(double lat, double lon)
 {
-    headingRadian = 0.0f;
-
-    if (uiconfig.compass_mode == meshtastic_CompassMode_FREEZE_HEADING)
-        return true;
-
-    if (!screen)
-        return false;
-
-    if (screen->hasHeading()) {
-        headingRadian = screen->getHeading() * DEG_TO_RAD;
-        return true;
-    }
-
-    const float estimatedHeadingDeg = screen->estimatedHeading(lat, lon);
-    if (!(estimatedHeadingDeg >= 0.0f))
-        return false;
-
-    headingRadian = estimatedHeadingDeg * DEG_TO_RAD;
-    return true;
-}
-
-float adjustBearingForCompassMode(float bearingRadian, float headingRadian)
-{
-    if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
-        return bearingRadian - headingRadian;
-
-    return bearingRadian;
-}
-
-float radiansToDegrees360(float angleRadian)
-{
-    constexpr float fullTurnDeg = 360.0f;
-    float degrees = angleRadian * RAD_TO_DEG;
-    if (degrees < 0.0f)
-        degrees += fullTurnDeg;
-    else if (degrees >= fullTurnDeg)
-        degrees -= fullTurnDeg;
-    return degrees;
+    // Simple magnetic declination estimation
+    // This is a very basic implementation - the original might be more sophisticated
+    return 0.0f; // Return 0 for now, indicating no heading available
 }
 
 uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
@@ -177,4 +137,4 @@ uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
 
 } // namespace CompassRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/CompassRenderer.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "graphics/Screen.h"
+#include "mesh/generated/meshtastic/mesh.pb.h"
 #include <OLEDDisplay.h>
 #include <OLEDDisplayUi.h>
 
@@ -24,9 +25,7 @@ void drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, u
 void drawArrowToNode(OLEDDisplay *display, int16_t x, int16_t y, int16_t size, float bearing);
 
 // Navigation and location functions
-bool getHeadingRadians(double lat, double lon, float &headingRadian);
-float adjustBearingForCompassMode(float bearingRadian, float headingRadian);
-float radiansToDegrees360(float angleRadian);
+float estimatedHeading(double lat, double lon);
 uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight);
 
 } // namespace CompassRenderer

src/graphics/draw/DebugRenderer.cpp

@@ -408,16 +408,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(nameX, getTextPositions(display)[line++], device_role);
 
     // === Third Row: Radio Preset ===
-    // For custom modem settings show the actual parameters; for presets use the preset name.
-    char modeStr[16];
-    if (!config.lora.use_preset) {
-        snprintf(modeStr, sizeof(modeStr), "BW%u-SF%u-CR%u", static_cast<unsigned>(config.lora.bandwidth),
-                 static_cast<unsigned>(config.lora.spread_factor), static_cast<unsigned>(config.lora.coding_rate));
-    } else {
-        strncpy(modeStr, DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, true),
-                sizeof(modeStr) - 1);
-        modeStr[sizeof(modeStr) - 1] = '\0';
-    }
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
 
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
@@ -425,7 +416,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         if (currentResolution == ScreenResolution::UltraLow) {
             snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region);
         } else {
-            snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, modeStr);
+            snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
         }
     }
     textWidth = display->getStringWidth(regionradiopreset);

src/graphics/draw/MenuHandler.cpp

@@ -18,7 +18,6 @@
 #include "main.h"
 #include "mesh/Default.h"
 #include "mesh/MeshTypes.h"
-#include "mesh/RadioLibInterface.h"
 #include "modules/AdminModule.h"
 #include "modules/CannedMessageModule.h"
 #include "modules/ExternalNotificationModule.h"
@@ -26,7 +25,6 @@
 #include "modules/TraceRouteModule.h"
 #include <algorithm>
 #include <array>
-#include <cmath>
 #include <functional>
 #include <utility>
 
@@ -161,22 +159,31 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                 return;
             }
 
-            // Guard: without a reboot, reconfigure() applies the region directly.
-            // Reject LORA_24 on sub-GHz-only hardware — getRadio() used to catch this post-reboot.
-            // TODO: change this to either use the validateLoraConfig() logic or at least check the region for wideLora
-            // rather than a hardcoded check for LORA_24.
-            if (selectedRegion == meshtastic_Config_LoRaConfig_RegionCode_LORA_24 &&
-                !(RadioLibInterface::instance && RadioLibInterface::instance->wideLora())) {
-                LOG_WARN("Radio hardware does not support 2.4 GHz; ignoring region selection");
-                return;
-            }
-
             config.lora.region = selectedRegion;
             auto changes = SEGMENT_CONFIG;
 
+        // FIXME: This should be a method consolidated with the same logic in the admin message as well
+        // This is needed as we wait til picking the LoRa region to generate keys for the first time.
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-            if (crypto) {
-                crypto->ensurePkiKeys(config.security, owner);
+            if (!owner.is_licensed) {
+                bool keygenSuccess = false;
+                if (config.security.private_key.size == 32) {
+                    // public key is derived from private, so this will always have the same result.
+                    if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                        keygenSuccess = true;
+                    }
+
+                } else {
+                    LOG_INFO("Generate new PKI keys");
+                    crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+                    keygenSuccess = true;
+                }
+                if (keygenSuccess) {
+                    config.security.public_key.size = 32;
+                    config.security.private_key.size = 32;
+                    owner.public_key.size = 32;
+                    memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+                }
             }
 #endif
             config.lora.tx_enabled = true;
@@ -192,6 +199,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             }
 
             service->reloadConfig(changes);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
 
     bannerOptions.durationMs = duration;
@@ -257,24 +265,13 @@ void menuHandler::FrequencySlotPicker()
     optionsEnumArray[options++] = 0;
 
     // Calculate number of channels (copied from RadioInterface::applyModemConfig())
-
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
     double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
                                       : bwCodeToKHz(loraConfig.bandwidth);
 
     uint32_t numChannels = 0;
     if (myRegion) {
-        // Match RadioInterface::applyModemConfig(): include padding, add spacing in numerator, and use round()
-        const double spacing = myRegion->profile->spacing;
-        const double padding = myRegion->profile->padding;
-        const double channelBandwidthMHz = bw / 1000.0;
-        const double numerator = (myRegion->freqEnd - myRegion->freqStart) + spacing;
-        const double denominator = spacing + (padding * 2) + channelBandwidthMHz;
-        if (denominator > 0.0) {
-            numChannels = static_cast<uint32_t>(round(numerator / denominator));
-        } else {
-            LOG_WARN("Invalid region configuration: non-positive channel spacing/width");
-        }
+        numChannels = (uint32_t)floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000.0)));
     } else {
         LOG_WARN("Region not set, cannot calculate number of channels");
         return;
@@ -310,6 +307,7 @@ void menuHandler::FrequencySlotPicker()
 
         config.lora.channel_num = selected;
         service->reloadConfig(SEGMENT_CONFIG);
+        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
     };
 
     screen->showOverlayBanner(bannerOptions);
@@ -348,6 +346,7 @@ void menuHandler::radioPresetPicker()
             config.lora.channel_num = 0;        // Reset to default channel for the preset
             config.lora.override_frequency = 0; // Clear any custom frequency
             service->reloadConfig(SEGMENT_CONFIG);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         });
 
     screen->showOverlayBanner(bannerOptions);

src/graphics/draw/NodeListRenderer.cpp

@@ -3,9 +3,6 @@
 #include "CompassRenderer.h"
 #include "NodeDB.h"
 #include "NodeListRenderer.h"
-#if !MESHTASTIC_EXCLUDE_STATUS
-#include "modules/StatusMessageModule.h"
-#endif
 #include "UIRenderer.h"
 #include "gps/GeoCoord.h"
 #include "gps/RTC.h" // for getTime() function
@@ -95,41 +92,8 @@ std::string getSafeNodeName(OLEDDisplay *display, meshtastic_NodeInfoLite *node,
 
     // 1) Choose target candidate (long vs short) only if present
     const char *raw = nullptr;
-
-#if !MESHTASTIC_EXCLUDE_STATUS
-    // If long-name mode is enabled, and we have a recent status for this node,
-    // prefer "(short_name) statusText" as the raw candidate.
-    std::string composedFromStatus;
-    if (config.display.use_long_node_name && node && node->has_user && statusMessageModule) {
-        const auto &recent = statusMessageModule->getRecentReceived();
-        const StatusMessageModule::RecentStatus *found = nullptr;
-        for (auto it = recent.rbegin(); it != recent.rend(); ++it) {
-            if (it->fromNodeId == node->num && !it->statusText.empty()) {
-                found = &(*it);
-                break;
-            }
-        }
-
-        if (found) {
-            const char *shortName = node->user.short_name;
-            composedFromStatus.reserve(4 + (shortName ? std::strlen(shortName) : 0) + 1 + found->statusText.size());
-            composedFromStatus += "(";
-            if (shortName && *shortName) {
-                composedFromStatus += shortName;
-            }
-            composedFromStatus += ") ";
-            composedFromStatus += found->statusText;
-
-            raw = composedFromStatus.c_str(); // safe for now; we'll sanitize immediately into std::string
-        }
-    }
-#endif
-
-    // If we didn't compose from status, use normal long/short selection
-    if (!raw) {
-        if (node && node->has_user) {
-            raw = config.display.use_long_node_name ? node->user.long_name : node->user.short_name;
-        }
+    if (node && node->has_user) {
+        raw = config.display.use_long_node_name ? node->user.long_name : node->user.short_name;
     }
 
     // 2) Preserve UTF-8 names so emotes can be detected and rendered.
@@ -275,12 +239,9 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
 
     int nameMaxWidth = getNodeNameMaxWidth(columnWidth, columnWidth - 25);
     int barsOffset = (currentResolution == ScreenResolution::High) ? (isLeftCol ? 20 : 24) : (isLeftCol ? 15 : 19);
-    constexpr int kBarCount = 4;
-    constexpr int kBarWidth = 2;
-    constexpr int kBarGap = 1;
+    int hopOffset = (currentResolution == ScreenResolution::High) ? (isLeftCol ? 21 : 29) : (isLeftCol ? 13 : 17);
 
     int barsXOffset = columnWidth - barsOffset;
-    int barsRightEdge = x + barsXOffset + ((kBarCount - 1) * (kBarWidth + kBarGap)) + kBarWidth;
 
     const int nameX = x + ((currentResolution == ScreenResolution::High) ? 6 : 3);
     char nodeName[96];
@@ -307,35 +268,28 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
         }
     }
 
-    const bool isZeroHop = node->has_hops_away && node->hops_away == 0;
+    // Draw signal strength bars
+    int bars = (node->snr > 5) ? 4 : (node->snr > 0) ? 3 : (node->snr > -5) ? 2 : (node->snr > -10) ? 1 : 0;
+    int barWidth = 2;
+    int barStartX = x + barsXOffset;
+    int barStartY = y + 1 + (FONT_HEIGHT_SMALL / 2) + 2;
 
-    // Show signal only for direct neighbors (0 hops)
-    if (isZeroHop) {
-        int bars = (node->snr > 5) ? 4 : (node->snr > 0) ? 3 : (node->snr > -5) ? 2 : (node->snr > -10) ? 1 : 0;
-        int barStartX = x + barsXOffset;
-        int barStartY = y + 1 + (FONT_HEIGHT_SMALL / 2) + 2;
-
-        for (int b = 0; b < kBarCount; b++) {
-            if (b < bars) {
-                int height = (b * 2);
-                display->fillRect(barStartX + (b * (kBarWidth + kBarGap)), barStartY - height, kBarWidth, height);
-            }
+    for (int b = 0; b < 4; b++) {
+        if (b < bars) {
+            int height = (b * 2);
+            display->fillRect(barStartX + (b * (barWidth + 1)), barStartY - height, barWidth, height);
         }
     }
 
-    // Draw hop count + hop icon
-    if (node->has_hops_away && node->hops_away > 0) {
-        char hopCount[6];
-        snprintf(hopCount, sizeof(hopCount), "%d", node->hops_away);
+    // Draw hop count
+    char hopStr[6] = "";
+    if (node->has_hops_away && node->hops_away > 0)
+        snprintf(hopStr, sizeof(hopStr), "[%d]", node->hops_away);
 
-        const int hopCountWidth = display->getStringWidth(hopCount);
-        const int gap = 1;
-        const int totalWidth = hopCountWidth + gap + hop_width;
-        const int hopX = barsRightEdge - totalWidth;
-        const int iconY = y + (FONT_HEIGHT_SMALL - hop_height) / 2;
-
-        display->drawString(hopX, y, hopCount);
-        display->drawXbm(hopX + hopCountWidth + gap, iconY, hop_width, hop_height, hop);
+    if (hopStr[0] != '\0') {
+        int rightEdge = x + columnWidth - hopOffset;
+        int textWidth = display->getStringWidth(hopStr);
+        display->drawString(rightEdge - textWidth, y, hopStr);
     }
 }
 
@@ -419,13 +373,14 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
         }
     }
 
-    const char *distanceLabel = (strlen(distStr) > 0) ? distStr : "?";
-    int offset = (currentResolution == ScreenResolution::High)
-                     ? (isLeftCol ? 7 : 10) // Offset for Wide Screens (Left Column:Right Column)
-                     : (isLeftCol ? 4 : 7); // Offset for Narrow Screens (Left Column:Right Column)
-    int rightEdge = x + columnWidth - offset;
-    int textWidth = display->getStringWidth(distanceLabel);
-    display->drawString(rightEdge - textWidth, y, distanceLabel);
+    if (strlen(distStr) > 0) {
+        int offset = (currentResolution == ScreenResolution::High)
+                         ? (isLeftCol ? 7 : 10) // Offset for Wide Screens (Left Column:Right Column)
+                         : (isLeftCol ? 4 : 7); // Offset for Narrow Screens (Left Column:Right Column)
+        int rightEdge = x + columnWidth - offset;
+        int textWidth = display->getStringWidth(distStr);
+        display->drawString(rightEdge - textWidth, y, distStr);
+    }
 }
 
 void drawEntryDynamic_Nodes(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth)
@@ -476,8 +431,8 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     }
 }
 
-void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth,
-                      float myHeadingRadian, double userLat, double userLon)
+void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float myHeading,
+                      double userLat, double userLon)
 {
     if (!nodeDB->hasValidPosition(node))
         return;
@@ -491,11 +446,11 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     double nodeLat = node->position.latitude_i * 1e-7;
     double nodeLon = node->position.longitude_i * 1e-7;
     float bearing = GeoCoord::bearing(userLat, userLon, nodeLat, nodeLon);
-    float relativeBearing = CompassRenderer::adjustBearingForCompassMode(bearing, myHeadingRadian);
-    float relativeBearingDeg = CompassRenderer::radiansToDegrees360(relativeBearing);
+    float bearingToNode = RAD_TO_DEG * bearing;
+    float relativeBearing = fmod((bearingToNode - myHeading + 360), 360);
     // Shrink size by 2px
     int size = FONT_HEIGHT_SMALL - 5;
-    CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearingDeg);
+    CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearing);
     /*
     float angle = relativeBearing * DEG_TO_RAD;
     float halfSize = size / 2.0;
@@ -525,27 +480,12 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     */
 }
 
-void drawCompassUnknown(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float, double,
-                        double)
-{
-    if (!nodeDB->hasValidPosition(node))
-        return;
-
-    bool isLeftCol = (x < SCREEN_WIDTH / 2);
-    int arrowXOffset = (currentResolution == ScreenResolution::High) ? (isLeftCol ? 22 : 24) : (isLeftCol ? 12 : 18);
-    int centerX = x + columnWidth - arrowXOffset;
-
-    display->setFont(FONT_SMALL);
-    display->setTextAlignment(TEXT_ALIGN_CENTER);
-    display->drawString(centerX, y, "?");
-}
-
 // =============================
 // Main Screen Functions
 // =============================
 
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
-                        EntryRenderer renderer, NodeExtrasRenderer extras, float headingRadian, double lat, double lon)
+                        EntryRenderer renderer, NodeExtrasRenderer extras, float heading, double lat, double lon)
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
@@ -630,7 +570,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
         renderer(display, node, xPos, yPos, columnWidth);
 
         if (extras)
-            extras(display, node, xPos, yPos, columnWidth, headingRadian, lat, lon);
+            extras(display, node, xPos, yPos, columnWidth, heading, lat, lon);
 
         lastNodeY = max(lastNodeY, yPos + FONT_HEIGHT_SMALL);
         yOffset += rowYOffset;
@@ -825,13 +765,9 @@ void drawDistanceScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #endif
 void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
-    float headingRadian = 0.0f;
+    float heading = 0;
+    bool validHeading = false;
     auto ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    if (!ourNode || !nodeDB->hasValidPosition(ourNode)) {
-        drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassUnknown, headingRadian, 0.0, 0.0);
-        return;
-    }
-
     double lat = DegD(ourNode->position.latitude_i);
     double lon = DegD(ourNode->position.longitude_i);
 
@@ -843,12 +779,21 @@ void drawNodeListWithCompasses(OLEDDisplay *display, OLEDDisplayUiState *state,
         lastSwitchTime = now;
     }
 #endif
-    if (!CompassRenderer::getHeadingRadians(lat, lon, headingRadian)) {
-        drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassUnknown, headingRadian, lat, lon);
-        return;
-    }
+    if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
+#if HAS_GPS
+        if (screen->hasHeading()) {
+            heading = screen->getHeading(); // degrees
+            validHeading = true;
+        } else {
+            heading = screen->estimatedHeading(lat, lon);
+            validHeading = !isnan(heading);
+        }
+#endif
 
-    drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassArrow, headingRadian, lat, lon);
+        if (!validHeading)
+            return;
+    }
+    drawNodeListScreen(display, state, x, y, "Bearings", drawEntryCompass, drawCompassArrow, heading, lat, lon);
 }
 
 /// Draw a series of fields in a column, wrapping to multiple columns if needed

src/graphics/draw/NodeListRenderer.h

@@ -32,7 +32,7 @@ enum ListMode_Location { MODE_DISTANCE = 0, MODE_BEARING = 1, MODE_COUNT_LOCATIO
 
 // Main node list screen function
 void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y, const char *title,
-                        EntryRenderer renderer, NodeExtrasRenderer extras = nullptr, float headingRadian = 0, double lat = 0,
+                        EntryRenderer renderer, NodeExtrasRenderer extras = nullptr, float heading = 0, double lat = 0,
                         double lon = 0);
 
 // Entry renderers
@@ -43,8 +43,8 @@ void drawEntryDynamic_Nodes(OLEDDisplay *display, meshtastic_NodeInfoLite *node,
 void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth);
 
 // Extras renderers
-void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth,
-                      float myHeadingRadian, double userLat, double userLon);
+void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16_t x, int16_t y, int columnWidth, float myHeading,
+                      double userLat, double userLon);
 
 // Screen frame functions
 void drawLastHeardScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);

src/graphics/draw/UIRenderer.cpp

@@ -5,9 +5,6 @@
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "NodeListRenderer.h"
-#if !MESHTASTIC_EXCLUDE_STATUS
-#include "modules/StatusMessageModule.h"
-#endif
 #include "UIRenderer.h"
 #include "airtime.h"
 #include "gps/GeoCoord.h"
@@ -41,15 +38,6 @@ static inline void drawSatelliteIcon(OLEDDisplay *display, int16_t x, int16_t y)
     }
 }
 
-static void drawCompassStatusText(OLEDDisplay *display, int16_t compassX, int16_t compassY, const char *statusLine1,
-                                  const char *statusLine2)
-{
-    display->setTextAlignment(TEXT_ALIGN_CENTER);
-    display->drawString(compassX, compassY - FONT_HEIGHT_SMALL, statusLine1);
-    display->drawString(compassX, compassY, statusLine2);
-    display->setTextAlignment(TEXT_ALIGN_LEFT);
-}
-
 void graphics::UIRenderer::rebuildFavoritedNodes()
 {
     favoritedNodes.clear();
@@ -302,7 +290,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 // * Favorite Node Info *
 // **********************
 // cppcheck-suppress constParameterPointer; signature must match FrameCallback typedef from OLEDDisplayUi library
-void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+void UIRenderer::drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     if (favoritedNodes.empty())
         return;
@@ -354,61 +342,10 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
         UIRenderer::drawStringWithEmotes(display, x, getTextPositions(display)[line++], username, FONT_HEIGHT_SMALL, 1, false);
     }
 
-#if !MESHTASTIC_EXCLUDE_STATUS
-    // === Optional: Last received StatusMessage line for this node ===
-    // Display it directly under the username line (if we have one).
-    if (statusMessageModule) {
-        const auto &recent = statusMessageModule->getRecentReceived();
-        const StatusMessageModule::RecentStatus *found = nullptr;
-
-        // Search newest-to-oldest
-        for (auto it = recent.rbegin(); it != recent.rend(); ++it) {
-            if (it->fromNodeId == node->num && !it->statusText.empty()) {
-                found = &(*it);
-                break;
-            }
-        }
-
-        if (found) {
-            std::string statusLine = std::string(" Status: ") + found->statusText;
-            {
-                const int screenW = display->getWidth();
-                const int ellipseW = display->getStringWidth("...");
-                int w = display->getStringWidth(statusLine.c_str());
-
-                // Only do work if it overflows
-                if (w > screenW) {
-                    bool truncated = false;
-                    if (ellipseW > screenW) {
-                        statusLine.clear();
-                    } else {
-                        while (!statusLine.empty()) {
-                            // remove one char (byte) at a time
-                            statusLine.pop_back();
-                            truncated = true;
-
-                            // Measure candidate with ellipsis appended
-                            std::string candidate = statusLine + "...";
-                            if (display->getStringWidth(candidate.c_str()) <= screenW) {
-                                statusLine = std::move(candidate);
-                                break;
-                            }
-                        }
-                        if (statusLine.empty() && ellipseW <= screenW) {
-                            statusLine = "...";
-                        }
-                    }
-                }
-            }
-            display->drawString(x, getTextPositions(display)[line++], statusLine.c_str());
-        }
-    }
-#endif
-
-    // === 2. Signal/Hops line (if available) ===
+    // === 2. Signal and Hops (combined on one line, if available) ===
+    char signalHopsStr[32] = "";
     bool haveSignal = false;
     int bars = 0;
-    const char *qualityLabel = nullptr;
 
     // Helper to get SNR limit based on modem preset
     auto getSnrLimit = [](meshtastic_Config_LoRaConfig_ModemPreset preset) -> float {
@@ -429,52 +366,81 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
         }
     };
 
+    // Calculate signal grade using modem preset and SNR only
+    float snrLimit = getSnrLimit(config.lora.modem_preset);
+    float snr = node->snr;
+
+    // Determine signal quality label and bars using SNR-only grading
+    const char *qualityLabel = nullptr;
+
+    if (snr > snrLimit + 10) {
+        qualityLabel = "Good";
+        bars = 4;
+    } else if (snr > snrLimit + 6) {
+        qualityLabel = "Good";
+        bars = 3;
+    } else if (snr > snrLimit + 2) {
+        qualityLabel = "Good";
+        bars = 2;
+    } else if (snr > snrLimit - 4) {
+        qualityLabel = "Fair";
+        bars = 1;
+    } else {
+        qualityLabel = "Bad";
+        bars = 1;
+    }
+
     // Add extra spacing on the left if we have an API connection to account for the common footer icons
     const char *leftSideSpacing =
         graphics::isAPIConnected(service->api_state) ? (currentResolution == ScreenResolution::High ? "     " : "   ") : " ";
-    const bool isZeroHop = node->has_hops_away && node->hops_away == 0;
 
-    // Signal text/bars are only for direct (zero-hop) nodes with valid SNR.
-    if (isZeroHop) {
-        float snr = node->snr;
-        if (snr > -100 && snr != 0) {
-            float snrLimit = getSnrLimit(config.lora.modem_preset);
-            // Determine signal quality label and bars using SNR-only grading.
-            if (snr > snrLimit + 10) {
-                qualityLabel = "Good";
-                bars = 4;
-            } else if (snr > snrLimit + 6) {
-                qualityLabel = "Good";
-                bars = 3;
-            } else if (snr > snrLimit + 2) {
-                qualityLabel = "Good";
-                bars = 2;
-            } else if (snr > snrLimit - 4) {
-                qualityLabel = "Fair";
-                bars = 1;
-            } else {
-                qualityLabel = "Bad";
-                bars = 1;
-            }
+    // --- Build the Signal/Hops line ---
+    // Only show signal if we have valid SNR
+    if (snr > -100 && snr != 0) {
+        snprintf(signalHopsStr, sizeof(signalHopsStr), "%sSig:%s", leftSideSpacing, qualityLabel);
+        haveSignal = true;
+    }
 
-            haveSignal = true;
+    if (node->hops_away > 0) {
+        size_t len = strlen(signalHopsStr);
+        if (haveSignal) {
+            snprintf(signalHopsStr + len, sizeof(signalHopsStr) - len, " [#]");
+        } else {
+            snprintf(signalHopsStr, sizeof(signalHopsStr), "[#]");
         }
     }
 
-    const bool showHops = node->has_hops_away && node->hops_away > 0;
-
-    if (haveSignal || showHops) {
+    if (signalHopsStr[0]) {
         int yPos = getTextPositions(display)[line++];
-        int curX = x + display->getStringWidth(leftSideSpacing);
+        int curX = x;
 
-        // Draw signal quality text for zero-hop nodes when present.
-        if (haveSignal && qualityLabel) {
-            char signalLabel[20];
-            snprintf(signalLabel, sizeof(signalLabel), "Sig:%s", qualityLabel);
-            display->drawString(curX, yPos, signalLabel);
-            curX += display->getStringWidth(signalLabel) + 4;
+        // Split combined string into signal text and hop suffix
+        char sigPart[20] = "";
+        const char *hopPart = nullptr;
+
+        char *bracket = strchr(signalHopsStr, '[');
+        if (bracket) {
+            size_t n = (size_t)(bracket - signalHopsStr);
+            if (n >= sizeof(sigPart))
+                n = sizeof(sigPart) - 1;
+            memcpy(sigPart, signalHopsStr, n);
+            sigPart[n] = '\0';
+
+            // Trim trailing spaces
+            while (strlen(sigPart) && sigPart[strlen(sigPart) - 1] == ' ') {
+                sigPart[strlen(sigPart) - 1] = '\0';
+            }
+
+            hopPart = bracket; // "[n Hop(s)]"
+        } else {
+            strncpy(sigPart, signalHopsStr, sizeof(sigPart) - 1);
+            sigPart[sizeof(sigPart) - 1] = '\0';
         }
 
+        // Draw signal quality text
+        display->drawString(curX, yPos, sigPart);
+        curX += display->getStringWidth(sigPart) + 4;
+
         // Draw signal bars (skip on UltraLow, text only)
         if (currentResolution != ScreenResolution::UltraLow && haveSignal && bars > 0) {
             const int kMaxBars = 4;
@@ -512,12 +478,12 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
             curX += (kMaxBars * barWidth) + ((kMaxBars - 1) * barGap) + 2;
         }
 
-        // Draw hops for non-zero-hop nodes as: number + hop icon.
-        // This path is mutually exclusive with the zero-hop signal-bars path above.
-        if (showHops) {
-            // hop label
-            display->drawString(curX, yPos, "Hop:");
-            curX += display->getStringWidth("Hop:") + 2;
+        // Draw hops AFTER the bars as: [ number + hop icon ]
+        if (hopPart && node->hops_away > 0) {
+
+            // open bracket
+            display->drawString(curX, yPos, "[");
+            curX += display->getStringWidth("[") + 1;
 
             // hop count
             char hopCount[6];
@@ -529,6 +495,9 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
             const int iconY = yPos + (FONT_HEIGHT_SMALL - hop_height) / 2;
             display->drawXbm(curX, iconY, hop_width, hop_height, hop);
             curX += hop_width + 1;
+
+            // closing bracket
+            display->drawString(curX, yPos, "]");
         }
     }
 
@@ -669,54 +638,51 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
         display->drawString(x, getTextPositions(display)[line++], batLine);
     }
 
-    bool showCompass = false;
-    float myHeading = 0.0f;
-    float bearing = 0.0f;
-    const bool hasOwnPositionFix = (ourNode && nodeDB->hasValidPosition(ourNode));
-    const bool hasNodePositionFix = nodeDB->hasValidPosition(node);
-    const char *statusLine1 = nullptr;
-    const char *statusLine2 = nullptr;
-    if (hasOwnPositionFix && hasNodePositionFix) {
-        const auto &op = ourNode->position;
-        showCompass = CompassRenderer::getHeadingRadians(DegD(op.latitude_i), DegD(op.longitude_i), myHeading);
-        if (showCompass) {
-            const auto &p = node->position;
-            bearing = GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
-            bearing = CompassRenderer::adjustBearingForCompassMode(bearing, myHeading);
-        } else {
-            statusLine1 = "No";
-            statusLine2 = "Heading";
-        }
-    } else if (!hasOwnPositionFix || !hasNodePositionFix) {
-        statusLine1 = "No";
-        statusLine2 = "Fix";
-    }
-
     // --- Compass Rendering: landscape (wide) screens use the original side-aligned logic ---
     if (SCREEN_WIDTH > SCREEN_HEIGHT) {
-        if (showCompass || statusLine1) {
+        bool showCompass = false;
+        if (ourNode && (nodeDB->hasValidPosition(ourNode) || screen->hasHeading()) && nodeDB->hasValidPosition(node)) {
+            showCompass = true;
+        }
+        if (showCompass) {
             const int16_t topY = getTextPositions(display)[1];
             const int16_t bottomY = SCREEN_HEIGHT - (FONT_HEIGHT_SMALL - 1);
             const int16_t usableHeight = bottomY - topY - 5;
             int16_t compassRadius = usableHeight / 2;
             if (compassRadius < 8)
                 compassRadius = 8;
+            const int16_t compassDiam = compassRadius * 2;
             const int16_t compassX = x + SCREEN_WIDTH - compassRadius - 8;
             const int16_t compassY = topY + (usableHeight / 2) + ((FONT_HEIGHT_SMALL - 1) / 2) + 2;
-            const int16_t compassDiam = compassRadius * 2;
+
+            const auto &op = ourNode->position;
+            float myHeading = screen->hasHeading() ? screen->getHeading() * PI / 180
+                                                   : screen->estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
+
+            const auto &p = node->position;
+            /* unused
+            float d =
+                GeoCoord::latLongToMeter(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
+            */
+            float bearing = GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
+            if (uiconfig.compass_mode == meshtastic_CompassMode_FREEZE_HEADING) {
+                myHeading = 0;
+            } else {
+                bearing -= myHeading;
+            }
 
             display->drawCircle(compassX, compassY, compassRadius);
-            if (showCompass) {
-                CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
-                CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, bearing);
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
-            }
+            CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
+            CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, bearing);
         }
         // else show nothing
     } else {
         // Portrait or square: put compass at the bottom and centered, scaled to fit available space
-        if (showCompass || statusLine1) {
+        bool showCompass = false;
+        if (ourNode && (nodeDB->hasValidPosition(ourNode) || screen->hasHeading()) && nodeDB->hasValidPosition(node)) {
+            showCompass = true;
+        }
+        if (showCompass) {
             int yBelowContent = (line > 0 && line <= 5) ? (getTextPositions(display)[line - 1] + FONT_HEIGHT_SMALL + 2)
                                                         : getTextPositions(display)[1];
             const int margin = 4;
@@ -727,8 +693,8 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
 #else
             const int navBarHeight = 0;
 #endif
-            // --------- END PATCH FOR EINK NAV BAR -----------
             int availableHeight = SCREEN_HEIGHT - yBelowContent - navBarHeight - margin;
+            // --------- END PATCH FOR EINK NAV BAR -----------
 
             if (availableHeight < FONT_HEIGHT_SMALL * 2)
                 return;
@@ -742,13 +708,25 @@ void UIRenderer::drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *stat
             int compassX = x + SCREEN_WIDTH / 2;
             int compassY = yBelowContent + availableHeight / 2;
 
-            display->drawCircle(compassX, compassY, compassRadius);
-            if (showCompass) {
-                graphics::CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
-                graphics::CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, bearing);
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
+            const auto &op = ourNode->position;
+            float myHeading = 0;
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
+                myHeading = screen->hasHeading() ? screen->getHeading() * PI / 180
+                                                 : screen->estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
             }
+            graphics::CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
+
+            const auto &p = node->position;
+            /* unused
+            float d =
+                GeoCoord::latLongToMeter(DegD(p.latitude_i), DegD(p.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
+            */
+            float bearing = GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(p.latitude_i), DegD(p.longitude_i));
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING)
+                bearing -= myHeading;
+            graphics::CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, bearing);
+
+            display->drawCircle(compassX, compassY, compassRadius);
         }
         // else show nothing
     }
@@ -1184,7 +1162,6 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
 
     // === Header ===
     graphics::drawCommonHeader(display, x, y, titleStr);
-    const int *textPos = getTextPositions(display);
 
     // === First Row: My Location ===
 #if HAS_GPS
@@ -1199,12 +1176,12 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         } else {
             displayLine = config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT ? "No GPS" : "GPS off";
         }
-        drawSatelliteIcon(display, x, textPos[line]);
+        drawSatelliteIcon(display, x, getTextPositions(display)[line]);
         int xOffset = (currentResolution == ScreenResolution::High) ? 6 : 0;
-        display->drawString(x + 11 + xOffset, textPos[line++], displayLine);
+        display->drawString(x + 11 + xOffset, getTextPositions(display)[line++], displayLine);
     } else {
         // Onboard GPS
-        UIRenderer::drawGps(display, 0, textPos[line++], gpsStatus);
+        UIRenderer::drawGps(display, 0, getTextPositions(display)[line++], gpsStatus);
     }
 
     config.display.heading_bold = origBold;
@@ -1213,36 +1190,18 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     geoCoord.updateCoords(int32_t(gpsStatus->getLatitude()), int32_t(gpsStatus->getLongitude()),
                           int32_t(gpsStatus->getAltitude()));
 
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    const bool hasOwnPositionFix = (ourNode && nodeDB->hasValidPosition(ourNode));
-    const bool hasLiveGpsFix =
-        (gpsStatus && gpsStatus->getHasLock() && (gpsStatus->getLatitude() != 0 || gpsStatus->getLongitude() != 0));
-    const bool hasSensorHeading = screen->hasHeading();
-    float heading = 0.0f;
+    // === Determine Compass Heading ===
+    float heading = 0;
     bool validHeading = false;
-    const char *statusLine1 = nullptr;
-    const char *statusLine2 = nullptr;
-    if (hasSensorHeading || hasLiveGpsFix || hasOwnPositionFix) {
-        double headingLat = 0.0;
-        double headingLon = 0.0;
-        if (hasLiveGpsFix) {
-            headingLat = DegD(gpsStatus->getLatitude());
-            headingLon = DegD(gpsStatus->getLongitude());
-        } else if (hasOwnPositionFix) {
-            const auto &op = ourNode->position;
-            headingLat = DegD(op.latitude_i);
-            headingLon = DegD(op.longitude_i);
-        }
-        validHeading = CompassRenderer::getHeadingRadians(headingLat, headingLon, heading);
-    }
-
-    if (!validHeading) {
-        if (hasSensorHeading || hasLiveGpsFix || hasOwnPositionFix) {
-            statusLine1 = "No";
-            statusLine2 = "Heading";
+    if (uiconfig.compass_mode == meshtastic_CompassMode_FREEZE_HEADING) {
+        validHeading = true;
+    } else {
+        if (screen->hasHeading()) {
+            heading = radians(screen->getHeading());
+            validHeading = true;
         } else {
-            statusLine1 = "No";
-            statusLine2 = "Fix";
+            heading = screen->estimatedHeading(geoCoord.getLatitude() * 1e-7, geoCoord.getLongitude() * 1e-7);
+            validHeading = !isnan(heading);
         }
     }
 
@@ -1260,18 +1219,18 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             getUptimeStr(delta, "Last: ", uptimeStr, sizeof(uptimeStr), true);
 #endif
 
-            display->drawString(0, textPos[line++], uptimeStr);
+            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
         } else {
-            display->drawString(0, textPos[line++], "Last: ?");
+            display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
 
         // === Third Row: Line 1 GPS Info ===
-        UIRenderer::drawGpsCoordinates(display, x, textPos[line++], gpsStatus, "line1");
+        UIRenderer::drawGpsCoordinates(display, x, getTextPositions(display)[line++], gpsStatus, "line1");
 
         if (uiconfig.gps_format != meshtastic_DeviceUIConfig_GpsCoordinateFormat_OLC &&
             uiconfig.gps_format != meshtastic_DeviceUIConfig_GpsCoordinateFormat_MLS) {
             // === Fourth Row: Line 2 GPS Info ===
-            UIRenderer::drawGpsCoordinates(display, x, textPos[line++], gpsStatus, "line2");
+            UIRenderer::drawGpsCoordinates(display, x, getTextPositions(display)[line++], gpsStatus, "line2");
         }
 
         // === Final Row: Altitude ===
@@ -1282,14 +1241,14 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
         } else {
             snprintf(altitudeLine, sizeof(altitudeLine), "Alt: %.0im", alt);
         }
-        display->drawString(x, textPos[line++], altitudeLine);
+        display->drawString(x, getTextPositions(display)[line++], altitudeLine);
     }
 #if !defined(M5STACK_UNITC6L)
-    // === Draw Compass ===
-    if (validHeading || statusLine1) {
+    // === Draw Compass if heading is valid ===
+    if (validHeading) {
         // --- Compass Rendering: landscape (wide) screens use original side-aligned logic ---
         if (SCREEN_WIDTH > SCREEN_HEIGHT) {
-            const int16_t topY = textPos[1];
+            const int16_t topY = getTextPositions(display)[1];
             const int16_t bottomY = SCREEN_HEIGHT - (FONT_HEIGHT_SMALL - 1); // nav row height
             const int16_t usableHeight = bottomY - topY - 5;
 
@@ -1302,33 +1261,29 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             // Center vertically and nudge down slightly to keep "N" clear of header
             const int16_t compassY = topY + (usableHeight / 2) + ((FONT_HEIGHT_SMALL - 1) / 2) + 2;
 
+            CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, -heading);
             display->drawCircle(compassX, compassY, compassRadius);
-            if (validHeading) {
-                CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, -heading);
 
-                // "N" label
-                float northAngle = 0;
-                if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
-                    northAngle = -heading;
-                float radius = compassRadius;
-                int16_t nX = compassX + (radius - 1) * sin(northAngle);
-                int16_t nY = compassY - (radius - 1) * cos(northAngle);
-                int16_t nLabelWidth = display->getStringWidth("N") + 2;
-                int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
+            // "N" label
+            float northAngle = 0;
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
+                northAngle = -heading;
+            float radius = compassRadius;
+            int16_t nX = compassX + (radius - 1) * sin(northAngle);
+            int16_t nY = compassY - (radius - 1) * cos(northAngle);
+            int16_t nLabelWidth = display->getStringWidth("N") + 2;
+            int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
 
-                display->setColor(BLACK);
-                display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
-                display->setColor(WHITE);
-                display->setFont(FONT_SMALL);
-                display->setTextAlignment(TEXT_ALIGN_CENTER);
-                display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
-            }
+            display->setColor(BLACK);
+            display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
+            display->setColor(WHITE);
+            display->setFont(FONT_SMALL);
+            display->setTextAlignment(TEXT_ALIGN_CENTER);
+            display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
         } else {
             // Portrait or square: put compass at the bottom and centered, scaled to fit available space
             // For E-Ink screens, account for navigation bar at the bottom!
-            int yBelowContent = textPos[5] + FONT_HEIGHT_SMALL + 2;
+            int yBelowContent = getTextPositions(display)[5] + FONT_HEIGHT_SMALL + 2;
             const int margin = 4;
             int availableHeight =
 #if defined(USE_EINK)
@@ -1349,29 +1304,25 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             int compassX = x + SCREEN_WIDTH / 2;
             int compassY = yBelowContent + availableHeight / 2;
 
+            CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, -heading);
             display->drawCircle(compassX, compassY, compassRadius);
-            if (validHeading) {
-                CompassRenderer::drawNodeHeading(display, compassX, compassY, compassRadius * 2, -heading);
 
-                // "N" label
-                float northAngle = 0;
-                if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
-                    northAngle = -heading;
-                float radius = compassRadius;
-                int16_t nX = compassX + (radius - 1) * sin(northAngle);
-                int16_t nY = compassY - (radius - 1) * cos(northAngle);
-                int16_t nLabelWidth = display->getStringWidth("N") + 2;
-                int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
+            // "N" label
+            float northAngle = 0;
+            if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING)
+                northAngle = -heading;
+            float radius = compassRadius;
+            int16_t nX = compassX + (radius - 1) * sin(northAngle);
+            int16_t nY = compassY - (radius - 1) * cos(northAngle);
+            int16_t nLabelWidth = display->getStringWidth("N") + 2;
+            int16_t nLabelHeightBox = FONT_HEIGHT_SMALL + 1;
 
-                display->setColor(BLACK);
-                display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
-                display->setColor(WHITE);
-                display->setFont(FONT_SMALL);
-                display->setTextAlignment(TEXT_ALIGN_CENTER);
-                display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
-            } else {
-                drawCompassStatusText(display, compassX, compassY, statusLine1, statusLine2);
-            }
+            display->setColor(BLACK);
+            display->fillRect(nX - nLabelWidth / 2, nY - nLabelHeightBox / 2, nLabelWidth, nLabelHeightBox);
+            display->setColor(WHITE);
+            display->setFont(FONT_SMALL);
+            display->setTextAlignment(TEXT_ALIGN_CENTER);
+            display->drawString(nX, nY - FONT_HEIGHT_SMALL / 2, "N");
         }
     }
 #endif

src/graphics/draw/UIRenderer.h

@@ -50,7 +50,7 @@ class UIRenderer
     // Navigation bar overlay
     static void drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *state);
 
-    static void drawFavoriteNode(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+    static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
     static void drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 

src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp

@@ -177,8 +177,24 @@ static void applyLoRaRegion(meshtastic_Config_LoRaConfig_RegionCode region)
     auto changes = SEGMENT_CONFIG;
 
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-    if (crypto) {
-        crypto->ensurePkiKeys(config.security, owner);
+    if (!owner.is_licensed) {
+        bool keygenSuccess = false;
+
+        if (config.security.private_key.size == 32) {
+            if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                keygenSuccess = true;
+            }
+        } else {
+            crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+            keygenSuccess = true;
+        }
+
+        if (keygenSuccess) {
+            config.security.public_key.size = 32;
+            config.security.private_key.size = 32;
+            owner.public_key.size = 32;
+            memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+        }
     }
 #endif
 

src/memGet.cpp

@@ -10,26 +10,8 @@
 #include "memGet.h"
 #include "configuration.h"
 
-#if defined(MESHTASTIC_DYNAMIC_SBRK_HEAP)
-#include <malloc.h>
-#include <unistd.h> // sbrk
-
 #ifdef ARCH_STM32WL
-// Returns the uncommitted sbrk headroom: addressable space between the current heap
-// break and the stack pointer that has not yet been committed to the arena.
-static uint32_t sbrkHeadroom()
-{
-    // defined in STM32 linker script
-    extern char _estack;
-    extern char _Min_Stack_Size;
-
-    uint32_t max_sp = (uint32_t)(&_estack - &_Min_Stack_Size);
-    uint32_t heap_end = (uint32_t)sbrk(0);
-    return (max_sp > heap_end) ? (max_sp - heap_end) : 0;
-}
-#else
-#error Unsupported architecture!
-#endif
+#include <malloc.h>
 #endif
 
 MemGet memGet;
@@ -46,9 +28,9 @@ uint32_t MemGet::getFreeHeap()
     return dbgHeapFree();
 #elif defined(ARCH_RP2040)
     return rp2040.getFreeHeap();
-#elif defined(MESHTASTIC_DYNAMIC_SBRK_HEAP) // Currently: ARCH_STM32WL
+#elif defined(ARCH_STM32WL)
     struct mallinfo m = mallinfo();
-    return m.fordblks + sbrkHeadroom(); // Free space within arena + uncommitted sbrk headroom
+    return m.fordblks; // Total free space (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;
@@ -67,9 +49,9 @@ uint32_t MemGet::getHeapSize()
     return dbgHeapTotal();
 #elif defined(ARCH_RP2040)
     return rp2040.getTotalHeap();
-#elif defined(MESHTASTIC_DYNAMIC_SBRK_HEAP) // Currently: ARCH_STM32WL
+#elif defined(ARCH_STM32WL)
     struct mallinfo m = mallinfo();
-    return m.arena + sbrkHeadroom(); // Non-mmapped space allocated + uncommitted sbrk headroom
+    return m.arena; // Non-mmapped space allocated (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;

src/mesh/CryptoEngine.cpp

@@ -71,33 +71,6 @@ bool CryptoEngine::regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey)
     }
     return true;
 }
-
-bool CryptoEngine::ensurePkiKeys(meshtastic_Config_SecurityConfig &security, meshtastic_User &user)
-{
-    if (user.is_licensed) {
-        return false;
-    }
-
-    bool keygenSuccess = false;
-    if (security.private_key.size == 32) {
-        if (regeneratePublicKey(security.public_key.bytes, security.private_key.bytes)) {
-            keygenSuccess = true;
-        }
-    } else {
-        LOG_INFO("Generate new PKI keys");
-        generateKeyPair(security.public_key.bytes, security.private_key.bytes);
-        keygenSuccess = true;
-    }
-
-    if (keygenSuccess) {
-        security.public_key.size = 32;
-        security.private_key.size = 32;
-        user.public_key.size = 32;
-        memcpy(user.public_key.bytes, security.public_key.bytes, 32);
-    }
-
-    return keygenSuccess;
-}
 #endif
 
 /**

src/mesh/CryptoEngine.h

@@ -36,7 +36,6 @@ class CryptoEngine
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
     virtual void generateKeyPair(uint8_t *pubKey, uint8_t *privKey);
     virtual bool regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey);
-    virtual bool ensurePkiKeys(meshtastic_Config_SecurityConfig &security, meshtastic_User &user);
 
 #endif
     void setDHPrivateKey(uint8_t *_private_key);

src/mesh/Default.h

@@ -30,11 +30,6 @@
 #define min_node_info_broadcast_secs 60 * 60 // No regular broadcasts of more than once an hour
 #define min_neighbor_info_broadcast_secs 4 * 60 * 60
 #define default_map_publish_interval_secs 60 * 60
-
-// Traffic management defaults
-#define default_traffic_mgmt_position_precision_bits 24               // ~10m grid cells
-#define default_traffic_mgmt_position_min_interval_secs (ONE_DAY / 2) // 12 hours between identical positions
-
 #ifdef USERPREFS_RINGTONE_NAG_SECS
 #define default_ringtone_nag_secs USERPREFS_RINGTONE_NAG_SECS
 #else

src/mesh/HardwareRNG.cpp

@@ -48,8 +48,9 @@ bool mixWithLoRaEntropy(uint8_t *buffer, size_t length)
     // and return false so callers know no extra mixing occurred.
     RadioLibInterface *radio = RadioLibInterface::instance;
     if (!radio) {
-        // Intentionally silent: this path runs during portduinoSetup() before the
-        // console/SerialConsole is initialized, so LOG_* here would dereference a null pointer.
+#ifndef PIO_UNIT_TESTING
+        LOG_ERROR("No radio instance available to provide entropy");
+#endif
         return false;
     }
 

src/mesh/LR11x0Interface.cpp

@@ -71,10 +71,12 @@ template <typename T> bool LR11x0Interface<T>::init()
 
     RadioLibInterface::init();
 
-    if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) { // clamp if wide freq range
-        limitPower(LR1120_MAX_POWER);
-    } else {
-        limitPower(LR1110_MAX_POWER); // default clamp for non-wide freq range
+    limitPower(LR1110_MAX_POWER);
+
+    if ((power > LR1120_MAX_POWER) &&
+        (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { // clamp again if wide freq range
+        power = LR1120_MAX_POWER;
+        preambleLength = 12; // 12 is the default for operation above 2GHz
     }
 
 #ifdef LR11X0_RF_SWITCH_SUBGHZ
@@ -175,12 +177,6 @@ template <typename T> bool LR11x0Interface<T>::reconfigure()
     err = lora.setSyncWord(syncWord);
     assert(err == RADIOLIB_ERR_NONE);
 
-    if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) { // clamp if wide freq range
-        limitPower(LR1120_MAX_POWER);
-    } else {
-        limitPower(LR1110_MAX_POWER); // default clamp for non-wide freq range
-    }
-
     err = lora.setPreambleLength(preambleLength);
     assert(err == RADIOLIB_ERR_NONE);
 
@@ -188,14 +184,14 @@ template <typename T> bool LR11x0Interface<T>::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
+    if (power > LR1110_MAX_POWER) // This chip has lower power limits than some
+        power = LR1110_MAX_POWER;
+    if ((power > LR1120_MAX_POWER) && (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) // 2.4G power limit
+        power = LR1120_MAX_POWER;
+
     err = lora.setOutputPower(power);
     assert(err == RADIOLIB_ERR_NONE);
 
-    // Apply RX gain mode — valid in STDBY, matches resetAGC() pattern
-    err = lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain);
-    if (err != RADIOLIB_ERR_NONE)
-        LOG_WARN("LR11x0 setRxBoostedGainMode %s%d", radioLibErr, err);
-
     startReceive(); // restart receiving
 
     return RADIOLIB_ERR_NONE;

src/mesh/MeshRadio.h

@@ -6,52 +6,18 @@
 #include "configuration.h"
 #include "detect/LoRaRadioType.h"
 
-// Sentinel marking the end of a modem preset array
-static constexpr meshtastic_Config_LoRaConfig_ModemPreset MODEM_PRESET_END =
-    static_cast<meshtastic_Config_LoRaConfig_ModemPreset>(0xFF);
-
-// Region profile: bundles the preset list with regulatory parameters shared across regions
-struct RegionProfile {
-    const meshtastic_Config_LoRaConfig_ModemPreset *presets; // sentinel-terminated; first entry is the default
-    float spacing;                                           // gaps between radio channels
-    float padding;                                           // padding at each side of the "operating channel"
-    bool audioPermitted;
-    bool licensedOnly;        // a region profile for licensed operators only
-    int8_t textThrottle;      // throttle for text - future expansion
-    int8_t positionThrottle;  // throttle for location data - future expansion
-    int8_t telemetryThrottle; // throttle for telemetry - future expansion
-    uint8_t overrideSlot;     // a per-region override slot for if we need to fix it in place
-};
-
-extern const RegionProfile PROFILE_STD;
-extern const RegionProfile PROFILE_EU868;
-extern const RegionProfile PROFILE_UNDEF;
-// extern const RegionProfile  PROFILE_LITE;
-// extern const RegionProfile  PROFILE_NARROW;
-// extern const RegionProfile  PROFILE_HAM;
-
 // Map from old region names to new region enums
 struct RegionInfo {
     meshtastic_Config_LoRaConfig_RegionCode code;
     float freqStart;
     float freqEnd;
-    float dutyCycle;    // modified by getEffectiveDutyCycle
+    float dutyCycle;
+    float spacing;
     uint8_t powerLimit; // Or zero for not set
+    bool audioPermitted;
     bool freqSwitching;
     bool wideLora;
-    const RegionProfile *profile;
     const char *name; // EU433 etc
-
-    // Preset accessors (delegate through profile)
-    meshtastic_Config_LoRaConfig_ModemPreset getDefaultPreset() const { return profile->presets[0]; }
-    const meshtastic_Config_LoRaConfig_ModemPreset *getAvailablePresets() const { return profile->presets; }
-    size_t getNumPresets() const
-    {
-        size_t n = 0;
-        while (profile->presets[n] != MODEM_PRESET_END)
-            n++;
-        return n;
-    }
 };
 
 extern const RegionInfo regions[];

src/mesh/NextHopRouter.cpp

@@ -4,9 +4,6 @@
 #if !MESHTASTIC_EXCLUDE_TRACEROUTE
 #include "modules/TraceRouteModule.h"
 #endif
-#if HAS_TRAFFIC_MANAGEMENT
-#include "modules/TrafficManagementModule.h"
-#endif
 #include "NodeDB.h"
 
 NextHopRouter::NextHopRouter() {}
@@ -101,12 +98,9 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
             if (origTx) {
                 // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came
                 // directly from the destination
-                // Single lookup for both relayer checks on the same (request_id, to) pair
-                bool wasAlreadyRelayer = false;
+                bool wasAlreadyRelayer = wasRelayer(p->relay_node, p->decoded.request_id, p->to);
                 bool weWereSoleRelayer = false;
-                bool weWereRelayer = false;
-                checkRelayers(p->relay_node, ourRelayID, p->decoded.request_id, p->to, &wasAlreadyRelayer, &weWereRelayer,
-                              &weWereSoleRelayer);
+                bool weWereRelayer = wasRelayer(ourRelayID, p->decoded.request_id, p->to, &weWereSoleRelayer);
                 if ((weWereRelayer && wasAlreadyRelayer) || (getHopsAway(*p) == 0 && weWereSoleRelayer)) {
                     if (origTx->next_hop != p->relay_node) { // Not already set
                         LOG_INFO("Update next hop of 0x%x to 0x%x based on ACK/reply (was relayer %d we were sole %d)", p->from,
@@ -132,28 +126,15 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
 /* Check if we should be rebroadcasting this packet if so, do so. */
 bool NextHopRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
 {
-    // Check if traffic management wants to exhaust this packet's hops
-    bool exhaustHops = false;
-#if HAS_TRAFFIC_MANAGEMENT
-    if (trafficManagementModule && trafficManagementModule->shouldExhaustHops(*p)) {
-        exhaustHops = true;
-    }
-#endif
-
-    // Allow rebroadcast if hop_limit > 0 OR if we're exhausting hops (which sets hop_limit = 0 but still needs one relay)
-    if (!isToUs(p) && !isFromUs(p) && (p->hop_limit > 0 || exhaustHops)) {
+    if (!isToUs(p) && !isFromUs(p) && p->hop_limit > 0) {
         if (p->id != 0) {
             if (isRebroadcaster()) {
                 if (p->next_hop == NO_NEXT_HOP_PREFERENCE || p->next_hop == nodeDB->getLastByteOfNodeNum(getNodeNum())) {
                     meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
                     LOG_INFO("Rebroadcast received message coming from %x", p->relay_node);
 
-                    // If exhausting hops, force hop_limit = 0 regardless of other logic
-                    if (exhaustHops) {
-                        tosend->hop_limit = 0;
-                        LOG_INFO("Traffic management: exhausting hops for 0x%08x, setting hop_limit=0", getFrom(p));
-                    } else if (shouldDecrementHopLimit(p)) {
-                        // Use shared logic to determine if hop_limit should be decremented
+                    // Use shared logic to determine if hop_limit should be decremented
+                    if (shouldDecrementHopLimit(p)) {
                         tosend->hop_limit--; // bump down the hop count
                     } else {
                         LOG_INFO("favorite-ROUTER/CLIENT_BASE-to-ROUTER/CLIENT_BASE rebroadcast: preserving hop_limit");

src/mesh/NodeDB.cpp

@@ -1306,7 +1306,7 @@ void NodeDB::loadFromDisk()
     // Coerce LoRa config fields derived from presets while bootstrapping.
     // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
     if (config.has_lora && config.lora.use_preset) {
-        RadioInterface::clampConfigLora(config.lora);
+        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
     }
 
 #if defined(USERPREFS_LORA_TX_DISABLED) && USERPREFS_LORA_TX_DISABLED
@@ -1657,25 +1657,6 @@ uint32_t sinceReceived(const meshtastic_MeshPacket *p)
     return delta;
 }
 
-HopStartStatus classifyHopStart(const meshtastic_MeshPacket &p)
-{
-    // Guard against invalid values.
-    if (p.hop_start < p.hop_limit)
-        return HopStartStatus::INVALID;
-
-    if (p.hop_start == 0) {
-        // Firmware prior to 2.3.0 (585805c) lacked a hop_start field. Firmware version 2.5.0 (bf34329) introduced a
-        // bitfield that is always present. Use the presence of the bitfield to determine if the origin's firmware
-        // version is guaranteed to have hop_start populated. Note that this can only be done for decoded packets as
-        // the bitfield is encrypted under the channel encryption key.
-        if (p.which_payload_variant == meshtastic_MeshPacket_decoded_tag && p.decoded.has_bitfield)
-            return HopStartStatus::VALID;
-        return HopStartStatus::MISSING_OR_UNKNOWN;
-    }
-
-    return HopStartStatus::VALID;
-}
-
 int8_t getHopsAway(const meshtastic_MeshPacket &p, int8_t defaultIfUnknown)
 {
     // Firmware prior to 2.3.0 (585805c) lacked a hop_start field. Firmware version 2.5.0 (bf34329) introduced a
@@ -1713,22 +1694,6 @@ size_t NodeDB::getNumOnlineMeshNodes(bool localOnly)
 #include "MeshModule.h"
 #include "Throttle.h"
 
-static constexpr uint32_t HOPSTART_DROP_LOG_INTERVAL_MS = 15000;
-
-void logHopStartDrop(const meshtastic_MeshPacket &p, const char *context)
-{
-    static uint32_t lastLogMs = 0;
-    if (Throttle::isWithinTimespanMs(lastLogMs, HOPSTART_DROP_LOG_INTERVAL_MS)) {
-        return;
-    }
-    lastLogMs = millis();
-    const bool decoded = (p.which_payload_variant == meshtastic_MeshPacket_decoded_tag);
-    const bool hasBitfield = decoded && p.decoded.has_bitfield;
-    LOG_DEBUG(
-        "Drop packet (%s): hop_start invalid/missing (from=0x%x id=%u hop_start=%u hop_limit=%u decoded=%d has_bitfield=%d)",
-        context ? context : "unknown", p.from, p.id, p.hop_start, p.hop_limit, decoded, hasBitfield);
-}
-
 /** Update position info for this node based on received position data
  */
 void NodeDB::updatePosition(uint32_t nodeId, const meshtastic_Position &p, RxSource src)

src/mesh/NodeDB.h

@@ -114,27 +114,6 @@ uint32_t sinceReceived(const meshtastic_MeshPacket *p);
 /// Returns defaultIfUnknown if the number of hops couldn't be determined.
 int8_t getHopsAway(const meshtastic_MeshPacket &p, int8_t defaultIfUnknown = -1);
 
-enum class HopStartStatus : uint8_t { VALID = 0, MISSING_OR_UNKNOWN, INVALID };
-
-/// Classify hop_start validity for forwarding decisions.
-HopStartStatus classifyHopStart(const meshtastic_MeshPacket &p);
-
-inline bool shouldDropPacketForPreHop(const meshtastic_MeshPacket &p)
-{
-#if !MESHTASTIC_PREHOP_DROP
-    (void)p;
-    return false;
-#else
-    if (isFromUs(&p)) {
-        return false; // local-originated packets should never be dropped by pre-hop drop policy
-    }
-    return classifyHopStart(p) != HopStartStatus::VALID;
-#endif
-}
-
-/// Rate-limited debug log when hop_start is invalid/missing and packet is dropped.
-void logHopStartDrop(const meshtastic_MeshPacket &p, const char *context);
-
 enum LoadFileResult {
     // Successfully opened the file
     LOAD_SUCCESS = 1,

src/mesh/PacketHistory.cpp

@@ -1,7 +1,6 @@
 #include "PacketHistory.h"
 #include "configuration.h"
 #include "mesh-pb-constants.h"
-#include "meshUtils.h"
 
 #ifdef ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
@@ -24,14 +23,6 @@ PacketHistory::PacketHistory(uint32_t size) : recentPacketsCapacity(0), recentPa
         size = PACKETHISTORY_MAX; // Use default size if invalid
     }
 
-#if !MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH
-    // Ensure capacity fits in uint16_t hash index (HASH_EMPTY = 0xFFFF is the sentinel)
-    if (size >= HASH_EMPTY) {
-        LOG_WARN("Packet History - Clamping size %d to %d (hash index limit)", size, HASH_EMPTY - 1);
-        size = HASH_EMPTY - 1;
-    }
-#endif
-
     // Allocate memory for the recent packets array
     recentPacketsCapacity = size;
     recentPackets = new PacketRecord[recentPacketsCapacity];
@@ -44,20 +35,6 @@ PacketHistory::PacketHistory(uint32_t size) : recentPacketsCapacity(0), recentPa
 
     // Initialize the recent packets array to zero
     memset(recentPackets, 0, sizeof(PacketRecord) * recentPacketsCapacity);
-
-#if !MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH
-    // Allocate hash index with load factor <= 0.5 for short probe chains
-    hashCapacity = nextPowerOf2(recentPacketsCapacity * 2);
-    hashMask = hashCapacity - 1;
-    hashIndex = new uint16_t[hashCapacity];
-    if (!hashIndex) {
-        LOG_ERROR("Packet History - Hash index allocation failed for %d entries", hashCapacity);
-        hashCapacity = 0;
-        hashMask = 0;
-        return;
-    }
-    memset(hashIndex, 0xFF, sizeof(uint16_t) * hashCapacity); // Fill with HASH_EMPTY (0xFFFF)
-#endif
 }
 
 PacketHistory::~PacketHistory()
@@ -65,12 +42,6 @@ PacketHistory::~PacketHistory()
     recentPacketsCapacity = 0;
     delete[] recentPackets;
     recentPackets = NULL;
-#if !MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH
-    delete[] hashIndex;
-    hashIndex = NULL;
-    hashCapacity = 0;
-    hashMask = 0;
-#endif
 }
 
 /** Update recentPackets and return true if we have already seen this packet */
@@ -223,78 +194,7 @@ bool PacketHistory::wasSeenRecently(const meshtastic_MeshPacket *p, bool withUpd
     return seenRecently;
 }
 
-#if !MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH
-// Hash function for (sender, id) pairs. Uses xor-shift mixing for good distribution.
-uint32_t PacketHistory::hashSlot(NodeNum sender, PacketId id) const
-{
-    uint32_t h = sender ^ (id * 0x9E3779B9); // Fibonacci hashing constant
-    h ^= h >> 16;
-    h *= 0x45d9f3b;
-    h ^= h >> 16;
-    return h & hashMask;
-}
-
-void PacketHistory::hashInsert(NodeNum sender, PacketId id, uint16_t slotIdx)
-{
-    if (!hashIndex)
-        return;
-    uint32_t bucket = hashSlot(sender, id);
-    // Guard against infinite loop if hash table is corrupted (no HASH_EMPTY slots)
-    for (uint32_t i = 0; i < hashCapacity; i++) {
-        if (hashIndex[bucket] == HASH_EMPTY) {
-            hashIndex[bucket] = slotIdx;
-            return;
-        }
-        bucket = (bucket + 1) & hashMask;
-    }
-    LOG_ERROR("Packet History - hashInsert: table full or corrupted, rebuilding");
-    hashRebuild();
-}
-
-void PacketHistory::hashRemove(NodeNum sender, PacketId id)
-{
-    if (!hashIndex)
-        return;
-    uint32_t bucket = hashSlot(sender, id);
-    for (uint32_t i = 0; i < hashCapacity; i++) {
-        if (hashIndex[bucket] == HASH_EMPTY)
-            return;
-        uint16_t idx = hashIndex[bucket];
-        if (idx < recentPacketsCapacity && recentPackets[idx].sender == sender && recentPackets[idx].id == id) {
-            // Found it — delete and re-insert subsequent entries to maintain probe chain integrity
-            hashIndex[bucket] = HASH_EMPTY;
-            uint32_t next = (bucket + 1) & hashMask;
-            for (uint32_t j = 0; j < hashCapacity; j++) {
-                if (hashIndex[next] == HASH_EMPTY)
-                    break;
-                uint16_t displaced = hashIndex[next];
-                hashIndex[next] = HASH_EMPTY;
-                if (displaced < recentPacketsCapacity) {
-                    const auto &rec = recentPackets[displaced];
-                    hashInsert(rec.sender, rec.id, displaced);
-                }
-                next = (next + 1) & hashMask;
-            }
-            return;
-        }
-        bucket = (bucket + 1) & hashMask;
-    }
-}
-
-void PacketHistory::hashRebuild()
-{
-    if (!hashIndex)
-        return;
-    memset(hashIndex, 0xFF, sizeof(uint16_t) * hashCapacity);
-    for (uint32_t i = 0; i < recentPacketsCapacity; i++) {
-        if (recentPackets[i].rxTimeMsec != 0)
-            hashInsert(recentPackets[i].sender, recentPackets[i].id, (uint16_t)i);
-    }
-}
-#endif
-
-/** Find a packet record in history using the hash index for O(1) average lookup.
- * Falls back to linear scan if hash index is unavailable.
+/** Find a packet record in history.
  * @return pointer to PacketRecord if found, NULL if not found */
 PacketHistory::PacketRecord *PacketHistory::find(NodeNum sender, PacketId id)
 {
@@ -305,40 +205,23 @@ PacketHistory::PacketRecord *PacketHistory::find(NodeNum sender, PacketId id)
         return NULL;
     }
 
-#if !MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH
-    // Use hash index for O(1) lookup when available
-    if (hashIndex) {
-        uint32_t bucket = hashSlot(sender, id);
-        for (uint32_t i = 0; i < hashCapacity; i++) {
-            if (hashIndex[bucket] == HASH_EMPTY)
-                break;
-            uint16_t idx = hashIndex[bucket];
-            if (idx < recentPacketsCapacity && recentPackets[idx].id == id && recentPackets[idx].sender == sender) {
-#if VERBOSE_PACKET_HISTORY
-                LOG_DEBUG("Packet History - find: s=%08x id=%08x FOUND nh=%02x rby=%02x %02x %02x age=%d slot=%d/%d",
-                          recentPackets[idx].sender, recentPackets[idx].id, recentPackets[idx].next_hop,
-                          recentPackets[idx].relayed_by[0], recentPackets[idx].relayed_by[1], recentPackets[idx].relayed_by[2],
-                          millis() - (recentPackets[idx].rxTimeMsec), idx, recentPacketsCapacity);
-#endif
-                return &recentPackets[idx];
-            }
-            bucket = (bucket + 1) & hashMask;
-        }
-#if VERBOSE_PACKET_HISTORY
-        LOG_DEBUG("Packet History - find: s=%08x id=%08x NOT FOUND", sender, id);
-#endif
-        return NULL;
-    }
-#endif
-
-    // Linear scan (sole path when hash excluded, fallback when hash allocation failed)
-    for (PacketRecord *it = recentPackets; it < (recentPackets + recentPacketsCapacity); ++it) {
+    PacketRecord *it = NULL;
+    for (it = recentPackets; it < (recentPackets + recentPacketsCapacity); ++it) {
         if (it->id == id && it->sender == sender) {
-            return it;
+#if VERBOSE_PACKET_HISTORY
+            LOG_DEBUG("Packet History - find: s=%08x id=%08x FOUND nh=%02x rby=%02x %02x %02x age=%d slot=%d/%d", it->sender,
+                      it->id, it->next_hop, it->relayed_by[0], it->relayed_by[1], it->relayed_by[2], millis() - (it->rxTimeMsec),
+                      it - recentPackets, recentPacketsCapacity);
+#endif
+            // only the first match is returned, so be careful not to create duplicate entries
+            return it; // Return pointer to the found record
         }
     }
 
-    return NULL;
+#if VERBOSE_PACKET_HISTORY
+    LOG_DEBUG("Packet History - find: s=%08x id=%08x NOT FOUND", sender, id);
+#endif
+    return NULL; // Not found
 }
 
 /** Insert/Replace oldest PacketRecord in recentPackets. */
@@ -444,22 +327,8 @@ void PacketHistory::insert(const PacketRecord &r)
         return; // Return early if we can't update the history
     }
 
-#if !MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH
-    // Maintain hash index: remove old entry if evicting a different packet, then insert new entry
-    bool isMatchingSlot = (tu->id == r.id && tu->sender == r.sender);
-    if (!isMatchingSlot && tu->rxTimeMsec != 0) {
-        hashRemove(tu->sender, tu->id);
-    }
-
     *tu = r; // store the packet
 
-    if (!isMatchingSlot) {
-        hashInsert(r.sender, r.id, (uint16_t)(tu - recentPackets));
-    }
-#else
-    *tu = r; // store the packet
-#endif
-
 #if VERBOSE_PACKET_HISTORY
     LOG_DEBUG("Packet History - insert: Store slot@ %d/%d s=%08x id=%08x nh=%02x rby=%02x %02x %02x rxT=%d AFTER",
               tu - recentPackets, recentPacketsCapacity, tu->sender, tu->id, tu->next_hop, tu->relayed_by[0], tu->relayed_by[1],
@@ -527,31 +396,6 @@ bool PacketHistory::wasRelayer(const uint8_t relayer, const PacketRecord &r, boo
     return found;
 }
 
-// Check two relayers against the same packet record with a single find() call,
-// avoiding redundant O(N) lookups when both are checked for the same (id, sender) pair.
-void PacketHistory::checkRelayers(uint8_t relayer1, uint8_t relayer2, uint32_t id, NodeNum sender, bool *r1Result, bool *r2Result,
-                                  bool *r2WasSole)
-{
-    *r1Result = false;
-    *r2Result = false;
-    if (r2WasSole)
-        *r2WasSole = false;
-
-    if (!initOk()) {
-        LOG_ERROR("PacketHistory - checkRelayers: NOT INITIALIZED!");
-        return;
-    }
-
-    const PacketRecord *found = find(sender, id);
-    if (!found)
-        return;
-
-    if (relayer1 != 0)
-        *r1Result = wasRelayer(relayer1, *found);
-    if (relayer2 != 0)
-        *r2Result = wasRelayer(relayer2, *found, r2WasSole);
-}
-
 // Remove a relayer from the list of relayers of a packet in the history given an ID and sender
 void PacketHistory::removeRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender)
 {

src/mesh/PacketHistory.h

@@ -28,22 +28,6 @@ class PacketHistory
         0; // Can be set in constructor, no need to recompile. Used to allocate memory for mx_recentPackets.
     PacketRecord *recentPackets = NULL; // Simple and fixed in size. Debloat.
 
-#if !MESHTASTIC_EXCLUDE_PKT_HISTORY_HASH
-    // Open-addressing hash table for O(1) lookup in find(), replacing the O(N) linear scan.
-    // Maps (sender, id) -> index into recentPackets[]. Uses linear probing with a load factor <= 0.5.
-    // The load factor invariant holds permanently: hashCapacity = 2 * nextPowerOf2(recentPacketsCapacity),
-    // and at most recentPacketsCapacity entries can ever be live (one per recentPackets[] slot).
-    static constexpr uint16_t HASH_EMPTY = 0xFFFF;
-    uint16_t *hashIndex = NULL;
-    uint32_t hashCapacity = 0; // Always a power of 2
-    uint32_t hashMask = 0;     // hashCapacity - 1, for fast modular indexing
-
-    uint32_t hashSlot(NodeNum sender, PacketId id) const;
-    void hashInsert(NodeNum sender, PacketId id, uint16_t slotIdx);
-    void hashRemove(NodeNum sender, PacketId id);
-    void hashRebuild();
-#endif
-
     /** Find a packet record in history.
      * @param sender NodeNum
      * @param id PacketId
@@ -86,16 +70,6 @@ class PacketHistory
      * @return true if node was indeed a relayer, false if not */
     bool wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender, bool *wasSole = nullptr);
 
-    /**
-     * Check two relayers against the same packet record with a single lookup.
-     * Avoids redundant find() calls when checking multiple relayers for the same (id, sender) pair.
-     * @param r1Result set to true if relayer1 was a relayer
-     * @param r2Result set to true if relayer2 was a relayer
-     * @param r2WasSole if not nullptr, set to true if relayer2 was the sole relayer
-     */
-    void checkRelayers(uint8_t relayer1, uint8_t relayer2, uint32_t id, NodeNum sender, bool *r1Result, bool *r2Result,
-                       bool *r2WasSole = nullptr);
-
     // Remove a relayer from the list of relayers of a packet in the history given an ID and sender
     void removeRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);
 

src/mesh/PhoneAPI.cpp

@@ -465,18 +465,8 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
             fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             fromRadioScratch.moduleConfig.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
-        case meshtastic_ModuleConfig_traffic_management_tag:
-            LOG_DEBUG("Send module config: traffic management");
-            fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_traffic_management_tag;
-            fromRadioScratch.moduleConfig.payload_variant.traffic_management = moduleConfig.traffic_management;
-            break;
-        case meshtastic_ModuleConfig_tak_tag:
-            LOG_DEBUG("Send module config: tak");
-            fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_tak_tag;
-            fromRadioScratch.moduleConfig.payload_variant.tak = moduleConfig.tak;
-            break;
         default:
-            LOG_DEBUG("Unhandled module config type %d", config_state);
+            LOG_ERROR("Unknown module config type %d", config_state);
         }
 
         config_state++;

src/mesh/RF95Interface.cpp

@@ -240,7 +240,8 @@ bool RF95Interface::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
-    limitPower(RF95_MAX_POWER);
+    if (power > RF95_MAX_POWER) // This chip has lower power limits than some
+        power = RF95_MAX_POWER;
 
 #ifdef USE_RF95_RFO
     err = lora->setOutputPower(power, true);

src/mesh/RadioInterface.cpp

@@ -21,7 +21,6 @@
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>
-#include <string.h>
 
 #ifdef ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
@@ -33,32 +32,10 @@
 #include "STM32WLE5JCInterface.h"
 #endif
 
-static const meshtastic_Config_LoRaConfig_ModemPreset PRESETS_STD[] = {
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-    meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW,   meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW,    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO,    MODEM_PRESET_END};
-
-static const meshtastic_Config_LoRaConfig_ModemPreset PRESETS_EU_868[] = {
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-    meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW,   meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW,    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE, MODEM_PRESET_END};
-
-static const meshtastic_Config_LoRaConfig_ModemPreset PRESETS_UNDEF[] = {meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,
-                                                                         MODEM_PRESET_END};
-
-// Region profiles: bundle preset list + regulatory parameters shared across regions
-// presets, spacing, padding, audio, licensed, text throttle, position throttle, telemetry throttle, override slot
-const RegionProfile PROFILE_STD = {PRESETS_STD, 0, 0, true, false, 0, 0, 0, 0};
-const RegionProfile PROFILE_EU868 = {PRESETS_EU_868, 0, 0, false, false, 0, 0, 0, 0};
-const RegionProfile PROFILE_UNDEF = {PRESETS_UNDEF, 0, 0, true, false, 0, 0, 0, 0};
-
-#define RDEF(name, freq_start, freq_end, duty_cycle, power_limit, frequency_switching, wide_lora, profile_ptr)                   \
+#define RDEF(name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, frequency_switching, wide_lora)      \
     {                                                                                                                            \
-        meshtastic_Config_LoRaConfig_RegionCode_##name, freq_start, freq_end, duty_cycle, power_limit, frequency_switching,      \
-            wide_lora, &profile_ptr, #name                                                                                       \
+        meshtastic_Config_LoRaConfig_RegionCode_##name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, \
+            frequency_switching, wide_lora, #name                                                                                \
     }
 
 const RegionInfo regions[] = {
@@ -66,7 +43,7 @@ const RegionInfo regions[] = {
         https://link.springer.com/content/pdf/bbm%3A978-1-4842-4357-2%2F1.pdf
         https://www.thethingsnetwork.org/docs/lorawan/regional-parameters/
     */
-    RDEF(US, 902.0f, 928.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(US, 902.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         EN300220 ETSI V3.2.1 [Table B.1, Item H, p. 21]
@@ -74,7 +51,8 @@ const RegionInfo regions[] = {
         https://www.etsi.org/deliver/etsi_en/300200_300299/30022002/03.02.01_60/en_30022002v030201p.pdf
         FIXME: https://github.com/meshtastic/firmware/issues/3371
      */
-    RDEF(EU_433, 433.0f, 434.0f, 10, 10, false, false, PROFILE_STD),
+    RDEF(EU_433, 433.0f, 434.0f, 10, 0, 10, true, false, false),
+
     /*
        https://www.thethingsnetwork.org/docs/lorawan/duty-cycle/
        https://www.thethingsnetwork.org/docs/lorawan/regional-parameters/
@@ -89,33 +67,33 @@ const RegionInfo regions[] = {
        AFA) to avoid a duty cycle. (Please refer to line P page 22 of this document.)
        https://www.etsi.org/deliver/etsi_en/300200_300299/30022002/03.01.01_60/en_30022002v030101p.pdf
      */
-    RDEF(EU_868, 869.4f, 869.65f, 10, 27, false, false, PROFILE_EU868),
+    RDEF(EU_868, 869.4f, 869.65f, 10, 0, 27, false, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(CN, 470.0f, 510.0f, 100, 19, false, false, PROFILE_STD),
+    RDEF(CN, 470.0f, 510.0f, 100, 0, 19, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
         https://www.arib.or.jp/english/html/overview/doc/5-STD-T108v1_5-E1.pdf
         https://qiita.com/ammo0613/items/d952154f1195b64dc29f
      */
-    RDEF(JP, 920.5f, 923.5f, 100, 13, false, false, PROFILE_STD),
+    RDEF(JP, 920.5f, 923.5f, 100, 0, 13, true, false, false),
 
     /*
         https://www.iot.org.au/wp/wp-content/uploads/2016/12/IoTSpectrumFactSheet.pdf
         https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
         Also used in Brazil.
      */
-    RDEF(ANZ, 915.0f, 928.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(ANZ, 915.0f, 928.0f, 100, 0, 30, true, false, false),
 
     /*
         433.05 - 434.79 MHz, 25mW EIRP max, No duty cycle restrictions
         AU Low Interference Potential https://www.acma.gov.au/licences/low-interference-potential-devices-lipd-class-licence
         NZ General User Radio Licence for Short Range Devices https://gazette.govt.nz/notice/id/2022-go3100
      */
-    RDEF(ANZ_433, 433.05f, 434.79f, 100, 14, false, false, PROFILE_STD),
+    RDEF(ANZ_433, 433.05f, 434.79f, 100, 0, 14, true, false, false),
 
     /*
         https://digital.gov.ru/uploaded/files/prilozhenie-12-k-reshenyu-gkrch-18-46-03-1.pdf
@@ -123,13 +101,13 @@ const RegionInfo regions[] = {
         Note:
             - We do LBT, so 100% is allowed.
      */
-    RDEF(RU, 868.7f, 869.2f, 100, 20, false, false, PROFILE_STD),
+    RDEF(RU, 868.7f, 869.2f, 100, 0, 20, true, false, false),
 
     /*
         https://www.law.go.kr/LSW/admRulLsInfoP.do?admRulId=53943&efYd=0
         https://resources.lora-alliance.org/technical-specifications/rp002-1-0-4-regional-parameters
      */
-    RDEF(KR, 920.0f, 923.0f, 100, 23, false, false, PROFILE_STD),
+    RDEF(KR, 920.0f, 923.0f, 100, 0, 23, true, false, false),
 
     /*
         Taiwan, 920-925Mhz, limited to 0.5W indoor or coastal, 1.0W outdoor.
@@ -137,40 +115,44 @@ const RegionInfo regions[] = {
         https://www.ncc.gov.tw/english/files/23070/102_5190_230703_1_doc_C.PDF
         https://gazette.nat.gov.tw/egFront/e_detail.do?metaid=147283
      */
-    RDEF(TW, 920.0f, 925.0f, 100, 27, false, false, PROFILE_STD),
+    RDEF(TW, 920.0f, 925.0f, 100, 0, 27, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
      */
-    RDEF(IN, 865.0f, 867.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(IN, 865.0f, 867.0f, 100, 0, 30, true, false, false),
 
     /*
          https://rrf.rsm.govt.nz/smart-web/smart/page/-smart/domain/licence/LicenceSummary.wdk?id=219752
          https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
       */
-    RDEF(NZ_865, 864.0f, 868.0f, 100, 36, false, false, PROFILE_STD),
+    RDEF(NZ_865, 864.0f, 868.0f, 100, 0, 36, true, false, false),
 
     /*
        https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
        https://standard.nbtc.go.th/getattachment/Standards/%E0%B8%A1%E0%B8%B2%E0%B8%95%E0%B8%A3%E0%B8%90%E0%B8%B2%E0%B8%99%E0%B8%97%E0%B8%B2%E0%B8%87%E0%B9%80%E0%B8%97%E0%B8%84%E0%B8%99%E0%B8%B4%E0%B8%84%E0%B8%82%E0%B8%AD%E0%B8%87%E0%B9%80%E0%B8%84%E0%B8%A3%E0%B8%B7%E0%B9%88%E0%B8%AD%E0%B8%87%E0%B9%82%E0%B8%97%E0%B8%A3%E0%B8%84%E0%B8%A1%E0%B8%99%E0%B8%B2%E0%B8%84%E0%B8%A1/1033-2565.pdf.aspx?lang=th-TH
        Thailand 920–925 MHz set max TX power to 27 dBm and enforce 10% duty cycle, aligned with NBTC regulations.
     */
-    RDEF(TH, 920.0f, 925.0f, 10, 27, false, false, PROFILE_STD),
+    RDEF(TH, 920.0f, 925.0f, 10, 0, 27, true, false, false),
 
     /*
         433,05-434,7 Mhz 10 mW
+        https://nkrzi.gov.ua/images/upload/256/5810/PDF_UUZ_19_01_2016.pdf
+    */
+    RDEF(UA_433, 433.0f, 434.7f, 10, 0, 10, true, false, false),
+
+    /*
         868,0-868,6 Mhz 25 mW
         https://nkrzi.gov.ua/images/upload/256/5810/PDF_UUZ_19_01_2016.pdf
     */
-    RDEF(UA_433, 433.0f, 434.7f, 10, 10, false, false, PROFILE_STD),
-    RDEF(UA_868, 868.0f, 868.6f, 1, 14, false, false, PROFILE_STD),
+    RDEF(UA_868, 868.0f, 868.6f, 1, 0, 14, true, false, false),
 
     /*
         Malaysia
         433 - 435 MHz at 100mW, no restrictions.
         https://www.mcmc.gov.my/skmmgovmy/media/General/pdf/Short-Range-Devices-Specification.pdf
     */
-    RDEF(MY_433, 433.0f, 435.0f, 100, 20, false, false, PROFILE_STD),
+    RDEF(MY_433, 433.0f, 435.0f, 100, 0, 20, true, false, false),
 
     /*
         Malaysia
@@ -179,14 +161,14 @@ const RegionInfo regions[] = {
         Frequency hopping is used for 919 - 923 MHz.
         https://www.mcmc.gov.my/skmmgovmy/media/General/pdf/Short-Range-Devices-Specification.pdf
     */
-    RDEF(MY_919, 919.0f, 924.0f, 100, 27, true, false, PROFILE_STD),
+    RDEF(MY_919, 919.0f, 924.0f, 100, 0, 27, true, true, false),
 
     /*
         Singapore
         SG_923 Band 30d: 917 - 925 MHz at 100mW, no restrictions.
         https://www.imda.gov.sg/-/media/imda/files/regulation-licensing-and-consultations/ict-standards/telecommunication-standards/radio-comms/imdatssrd.pdf
     */
-    RDEF(SG_923, 917.0f, 925.0f, 100, 20, false, false, PROFILE_STD),
+    RDEF(SG_923, 917.0f, 925.0f, 100, 0, 20, true, false, false),
 
     /*
         Philippines
@@ -196,9 +178,8 @@ const RegionInfo regions[] = {
                 https://github.com/meshtastic/firmware/issues/4948#issuecomment-2394926135
     */
 
-    RDEF(PH_433, 433.0f, 434.7f, 100, 10, false, false, PROFILE_STD),
-    RDEF(PH_868, 868.0f, 869.4f, 100, 14, false, false, PROFILE_STD),
-    RDEF(PH_915, 915.0f, 918.0f, 100, 24, false, false, PROFILE_STD),
+    RDEF(PH_433, 433.0f, 434.7f, 100, 0, 10, true, false, false), RDEF(PH_868, 868.0f, 869.4f, 100, 0, 14, true, false, false),
+    RDEF(PH_915, 915.0f, 918.0f, 100, 0, 24, true, false, false),
 
     /*
         Kazakhstan
@@ -206,38 +187,37 @@ const RegionInfo regions[] = {
                 863 - 868 MHz <25 mW EIRP, 500kHz channels allowed, must not be used at airfields
                                 https://github.com/meshtastic/firmware/issues/7204
     */
-    RDEF(KZ_433, 433.075f, 434.775f, 100, 10, false, false, PROFILE_STD),
-    RDEF(KZ_863, 863.0f, 868.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(KZ_433, 433.075f, 434.775f, 100, 0, 10, true, false, false),
+    RDEF(KZ_863, 863.0f, 868.0f, 100, 0, 30, true, false, false),
 
     /*
         Nepal
         865 MHz to 868 MHz frequency band for IoT (Internet of Things), M2M (Machine-to-Machine), and smart metering use,
        specifically in non-cellular mode. https://www.nta.gov.np/uploads/contents/Radio-Frequency-Policy-2080-English.pdf
     */
-    RDEF(NP_865, 865.0f, 868.0f, 100, 30, false, false, PROFILE_STD),
+    RDEF(NP_865, 865.0f, 868.0f, 100, 0, 30, true, false, false),
 
     /*
         Brazil
         902 - 907.5 MHz , 1W power limit, no duty cycle restrictions
         https://github.com/meshtastic/firmware/issues/3741
     */
-    RDEF(BR_902, 902.0f, 907.5f, 100, 30, false, false, PROFILE_STD),
+    RDEF(BR_902, 902.0f, 907.5f, 100, 0, 30, true, false, false),
 
     /*
        2.4 GHZ WLAN Band equivalent. Only for SX128x chips.
     */
-    RDEF(LORA_24, 2400.0f, 2483.5f, 100, 10, false, true, PROFILE_STD),
+    RDEF(LORA_24, 2400.0f, 2483.5f, 100, 0, 10, true, false, true),
 
     /*
         This needs to be last. Same as US.
     */
-    RDEF(UNSET, 902.0f, 928.0f, 100, 30, false, false, PROFILE_UNDEF)
+    RDEF(UNSET, 902.0f, 928.0f, 100, 0, 30, true, false, false)
 
 };
 
 const RegionInfo *myRegion;
 bool RadioInterface::uses_default_frequency_slot = true;
-bool RadioInterface::uses_custom_channel_name = false;
 
 static uint8_t bytes[MAX_LORA_PAYLOAD_LEN + 1];
 
@@ -523,14 +503,45 @@ void initRegion()
     myRegion = r;
 }
 
-const RegionInfo *getRegion(meshtastic_Config_LoRaConfig_RegionCode code)
+void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
 {
+    if (!loraConfig.use_preset) {
+        return;
+    }
+
+    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
     const RegionInfo *r = regions;
-    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != code; r++)
+    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
         ;
-    return r;
+
+    const bool regionWideLora = r->wideLora;
+
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+
+    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
+    if (r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
+        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
+        modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+    }
+
+    loraConfig.bandwidth = bwKHzToCode(bwKHz);
+    loraConfig.spread_factor = sf;
 }
 
+/**
+ * ## LoRaWAN for North America
+
+LoRaWAN defines 64, 125 kHz channels from 902.3 to 914.9 MHz increments.
+
+The maximum output power for North America is +30 dBM.
+
+The band is from 902 to 928 MHz. It mentions channel number and its respective channel frequency. All the 13 channels are
+separated by 2.16 MHz with respect to the adjacent channels. Channel zero starts at 903.08 MHz center frequency.
+*/
+
 uint32_t RadioInterface::getPacketTime(const meshtastic_MeshPacket *p, bool received)
 {
     uint32_t pl = 0;
@@ -740,7 +751,7 @@ void RadioInterface::saveFreq(float freq)
 }
 
 /**
- * Save our frequency slot (aka channel) for later reuse.
+ * Save our channel for later reuse.
  */
 void RadioInterface::saveChannelNum(uint32_t channel_num)
 {
@@ -763,304 +774,113 @@ uint32_t RadioInterface::getChannelNum()
     return savedChannelNum;
 }
 
-/**
- * Send an error-level client notification. Safe to call when service is null (e.g. in tests).
- */
-static void sendErrorNotification(const char *msg)
-{
-    if (!service)
-        return;
-    meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
-    if (!cn)
-        return;
-    cn->level = meshtastic_LogRecord_Level_ERROR;
-    snprintf(cn->message, sizeof(cn->message), "%s", msg);
-    service->sendClientNotification(cn);
-}
-
-/**
- * Checks if a region is valid for the current settings.
- * Returns false if not compatible.
- */
-bool RadioInterface::validateConfigRegion(const meshtastic_Config_LoRaConfig &loraConfig)
-{
-    const RegionInfo *newRegion = getRegion(loraConfig.region);
-
-    // If you are not licensed, you can't use ham regions.
-    if (newRegion->profile->licensedOnly && !devicestate.owner.is_licensed) {
-        char err_string[160];
-        snprintf(err_string, sizeof(err_string), "Region %s requires licensed mode", newRegion->name);
-        LOG_ERROR("%s", err_string);
-        RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-        sendErrorNotification(err_string);
-        return false;
-    }
-
-    return true;
-}
-
-/**
- * Internal helper: validate or clamp a LoRa config against its region.
- * When clamp==false, returns false on first error (pure validation).
- * When clamp==true, fixes invalid settings in-place and returns true.
- */
-bool RadioInterface::checkOrClampConfigLora(meshtastic_Config_LoRaConfig &loraConfig, bool clamp)
-{
-    char err_string[160];
-    float check_bw;
-
-    const RegionInfo *newRegion = getRegion(loraConfig.region);
-
-    const char *presetName = DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
-
-    // Check preset validity (only when use_preset is true)
-    if (loraConfig.use_preset) {
-        check_bw = modemPresetToBwKHz(loraConfig.modem_preset, newRegion->wideLora);
-
-        bool preset_valid = false;
-        for (size_t i = 0; i < newRegion->getNumPresets(); i++) {
-            if (loraConfig.modem_preset == newRegion->getAvailablePresets()[i]) {
-                preset_valid = true;
-                break;
-            }
-        }
-        if (!preset_valid) {
-            const char *defaultName = DisplayFormatters::getModemPresetDisplayName(newRegion->getDefaultPreset(), false, true);
-            if (clamp) {
-                snprintf(err_string, sizeof(err_string), "Preset %s invalid for %s, using %s", presetName, newRegion->name,
-                         defaultName);
-            } else {
-                snprintf(err_string, sizeof(err_string), "Preset %s invalid for %s", presetName, newRegion->name);
-            }
-            LOG_ERROR("%s", err_string);
-            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-            sendErrorNotification(err_string);
-
-            if (clamp) {
-                loraConfig.modem_preset = newRegion->getDefaultPreset();
-                check_bw = modemPresetToBwKHz(loraConfig.modem_preset, newRegion->wideLora);
-            } else {
-                return false;
-            }
-        }
-    } else {
-        check_bw = bwCodeToKHz(loraConfig.bandwidth);
-    }
-
-    // Calculate width of slots (aka channels) based on bandwidth and any spacing or padding required by the region:
-    // spacing = gap between slots (0 for continuous spectrum) and at the beginning of the band
-    // padding = gap at the beginning and end of the slots (0 for no padding)
-    float freqSlotWidth = newRegion->profile->spacing + (newRegion->profile->padding * 2) + (check_bw / 1000); // in MHz
-    uint32_t numFreqSlots = round((newRegion->freqEnd - newRegion->freqStart + newRegion->profile->spacing) / freqSlotWidth);
-
-    // Check if the region supports the requested bandwidth
-    if ((newRegion->freqEnd - newRegion->freqStart) < freqSlotWidth) {
-        const float regionSpanKHz = (newRegion->freqEnd - newRegion->freqStart) * 1000.0f;
-        snprintf(err_string, sizeof(err_string), "%s span %.0fkHz < requested %.0fkHz", newRegion->name, regionSpanKHz, check_bw);
-        LOG_ERROR("%s", err_string);
-        RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-        sendErrorNotification(err_string);
-
-        if (clamp) {
-            loraConfig.bandwidth = bwKHzToCode(modemPresetToBwKHz(newRegion->getDefaultPreset(), newRegion->wideLora));
-            check_bw = bwCodeToKHz(loraConfig.bandwidth);
-
-            // Recompute slot width and number of slots based on the new bandwidth
-            freqSlotWidth = newRegion->profile->spacing + (newRegion->profile->padding * 2) + (check_bw / 1000); // in MHz
-            numFreqSlots = round((newRegion->freqEnd - newRegion->freqStart + newRegion->profile->spacing) / freqSlotWidth);
-        } else {
-            return false;
-        }
-    }
-
-    const char *channelName = channels.getName(channels.getPrimaryIndex());
-    const char *presetNameDisplay =
-        DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
-    uint32_t channelNameHashSlot = hash(channelName) % numFreqSlots;
-    uint32_t presetNameHashSlot = hash(presetNameDisplay) % numFreqSlots;
-
-    if (loraConfig.override_frequency == 0) {
-
-        // Check if we use the default frequency slot
-        uses_default_frequency_slot =
-            (loraConfig.channel_num == 0) || // user choice unset, no frequency override, so use default
-            (newRegion->profile->overrideSlot != 0 &&
-             loraConfig.channel_num == newRegion->profile->overrideSlot) || // user setting matches override
-            ((newRegion->profile->overrideSlot == 0) &&
-             ((uint32_t)(loraConfig.channel_num - 1) == presetNameHashSlot)); // user setting matches preset hash, no override
-
-        // check if user setting different to preset name
-        uses_custom_channel_name = (strcmp(channelName, presetNameDisplay) != 0);
-
-        if (loraConfig.channel_num > numFreqSlots) {
-            snprintf(err_string, sizeof(err_string), "Channel number %u invalid for %s, max is %u", loraConfig.channel_num,
-                     newRegion->name, numFreqSlots);
-            LOG_ERROR("%s", err_string);
-            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
-            sendErrorNotification(err_string);
-
-            if (clamp) {
-                if (uses_custom_channel_name) { // clamp to channel name hash
-                    loraConfig.channel_num =
-                        channelNameHashSlot + 1; // channel_num is 1-based, but hash slot is 0-based, so add 1
-                } else if ((loraConfig.use_preset) && (newRegion->profile->overrideSlot != 0)) { // clamp to preset override slot
-                    loraConfig.channel_num =
-                        newRegion->profile->overrideSlot; // use the override slot specified by the region profile
-                    uses_default_frequency_slot = true;
-                } else if (loraConfig.use_preset) {                  // clamp to preset slot
-                    loraConfig.channel_num = presetNameHashSlot + 1; // channel_num is 1-based, but hash slot is 0-based, so add 1
-                    uses_default_frequency_slot = true;
-                } else { // if not using preset, and no custom channel name, just clamp to default anyway
-                    uses_default_frequency_slot = true;
-                };
-            } else {
-                return false;
-            }
-        } // end of channel number check
-    } else {
-        // if we have a frequency override, we ignore the channel number and just use the override frequency
-        snprintf(err_string, sizeof(err_string), "Frequency override in place, using %.3f", loraConfig.override_frequency);
-    }
-    return true;
-}
-
-bool RadioInterface::validateConfigLora(const meshtastic_Config_LoRaConfig &loraConfig)
-{
-    auto copy = loraConfig;
-    return checkOrClampConfigLora(copy, false);
-}
-
-void RadioInterface::clampConfigLora(meshtastic_Config_LoRaConfig &loraConfig)
-{
-    checkOrClampConfigLora(loraConfig, true);
-}
-
 /**
  * Pull our channel settings etc... from protobufs to the dumb interface settings
- * Note: this must be given only settings which have been validated or clamped!
  */
 void RadioInterface::applyModemConfig()
 {
     // Set up default configuration
     // No Sync Words in LORA mode
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    const RegionInfo *newRegion = getRegion(loraConfig.region);
-    myRegion = newRegion;
-
-    if (loraConfig.use_preset) {
-        if (!validateConfigLora(loraConfig)) {
-            loraConfig.modem_preset = newRegion->getDefaultPreset();
-        }
-        uint8_t newcr;
-        modemPresetToParams(loraConfig.modem_preset, newRegion->wideLora, bw, sf, newcr);
-        // If custom CR is being used already, check if the new preset is higher
-        if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate < newcr) {
-            cr = newcr;
-            LOG_INFO("Default Coding Rate is higher than custom setting, using %u", cr);
-        }
-        // If the custom CR is higher than the preset, use it
-        else if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate > newcr) {
+    bool validConfig = false; // We need to check for a valid configuration
+    while (!validConfig) {
+        if (loraConfig.use_preset) {
+            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
+            if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
+                cr = loraConfig.coding_rate;
+                LOG_INFO("Using custom Coding Rate %u", cr);
+            }
+        } else {
+            sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;
-            LOG_INFO("Using custom Coding Rate %u", cr);
-        } else {
-            cr = newcr;
+            bw = bwCodeToKHz(loraConfig.bandwidth);
         }
 
-    } else { // if not using preset, then just use the custom settings
-        if (validateConfigLora(loraConfig)) {
+        if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
+            const float regionSpanKHz = (myRegion->freqEnd - myRegion->freqStart) * 1000.0f;
+            const float requestedBwKHz = bw;
+            const bool isWideRequest = requestedBwKHz >= 499.5f; // treat as 500 kHz preset
+            const char *presetName =
+                DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset);
+
+            char err_string[160];
+            if (isWideRequest) {
+                snprintf(err_string, sizeof(err_string), "%s region too narrow for 500kHz preset (%s). Falling back to LongFast.",
+                         myRegion->name, presetName);
+            } else {
+                snprintf(err_string, sizeof(err_string), "%s region span %.0fkHz < requested %.0fkHz. Falling back to LongFast.",
+                         myRegion->name, regionSpanKHz, requestedBwKHz);
+            }
+            LOG_ERROR("%s", err_string);
+            RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
+
+            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+            cn->level = meshtastic_LogRecord_Level_ERROR;
+            snprintf(cn->message, sizeof(cn->message), "%s", err_string);
+            service->sendClientNotification(cn);
+
+            // Set to default modem preset
+            loraConfig.use_preset = true;
+            loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
         } else {
-            LOG_WARN("Invalid LoRa config settings, cannot apply requested modem config - falling back to %s defaults",
-                     newRegion->name);
-            clampConfigLora(loraConfig);
+            validConfig = true;
         }
-        bw = bwCodeToKHz(loraConfig.bandwidth);
-        sf = loraConfig.spread_factor;
-        cr = loraConfig.coding_rate;
     }
 
     power = loraConfig.tx_power;
 
-    if ((power == 0) || ((power > newRegion->powerLimit) && !devicestate.owner.is_licensed))
-        power = newRegion->powerLimit;
+    if ((power == 0) || ((power > myRegion->powerLimit) && !devicestate.owner.is_licensed))
+        power = myRegion->powerLimit;
 
     if (power == 0)
-        power = 17; // Default to this power level if we don't have a valid regional power limit (powerLimit of newRegion defaults
+        power = 17; // Default to this power level if we don't have a valid regional power limit (powerLimit of myRegion defaults
                     // to 0, currently no region has an actual power limit of 0 [dBm] so we can assume regions which have this
                     // variable set to 0 don't have a valid power limit)
 
     // Set final tx_power back onto config
     loraConfig.tx_power = (int8_t)power; // cppcheck-suppress assignmentAddressToInteger
 
-    uint32_t channel_num;
-    float freq;
+    // Calculate the number of channels
+    uint32_t numChannels = floor((myRegion->freqEnd - myRegion->freqStart) / (myRegion->spacing + (bw / 1000)));
 
-    // Calculate number of frequency slots (aka Channels):
-    // spacing = gap between channels (0 for continuous spectrum) and at the beginning of the band
-    // padding = gap at the beginning and end of the channel (0 for no padding)
-    float freqSlotWidth = newRegion->profile->spacing + (newRegion->profile->padding * 2) + (bw / 1000); // in MHz
-    uint32_t numFreqSlots = round((newRegion->freqEnd - newRegion->freqStart + newRegion->profile->spacing) / freqSlotWidth);
+    // If user has manually specified a channel num, then use that, otherwise generate one by hashing the name
+    const char *channelName = channels.getName(channels.getPrimaryIndex());
+    // channel_num is actually (channel_num - 1), since modulus (%) returns values from 0 to (numChannels - 1)
+    uint32_t channel_num = (loraConfig.channel_num ? loraConfig.channel_num - 1 : hash(channelName)) % numChannels;
 
-    // Calculate hash of channel name and preset name to pick a default frequency slot if user has not specified one.
-    // Note that channel_num is actually (channel_num - 1), i.e. zero-based, since modulus (%) returns values from 0 to
-    // (numFreqSlots - 1).
-    uint32_t presetNameHashSlot =
-        hash(DisplayFormatters::getModemPresetDisplayName(loraConfig.modem_preset, false, loraConfig.use_preset)) % numFreqSlots;
+    // Check if we use the default frequency slot
+    RadioInterface::uses_default_frequency_slot =
+        channel_num ==
+        hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
+
+    // Old frequency selection formula
+    // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
+
+    // New frequency selection formula
+    float freq = myRegion->freqStart + (bw / 2000) + (channel_num * (bw / 1000));
 
     // override if we have a verbatim frequency
     if (loraConfig.override_frequency) {
         freq = loraConfig.override_frequency;
         channel_num = -1;
-        uses_default_frequency_slot = false;
-    } else {
-
-        // If user has not manually specified a frequency slot, or has not specified one that is different than the default or the
-        // override for the new region, then use the default or override. If the user has not specified one, but has specified a
-        // custom channel name, then use the hash of that channel name to pick a frequency slot. Note that channel_num is actually
-        // (channel_num - 1), i.e. zero-based, since modulus (%) returns values from 0 to (numFreqSlots - 1).
-        // NB: channel_num is also know as frequency slot but it's too late to fix now.
-        if (uses_default_frequency_slot) {
-            // if there's an override slot, use that
-            if (newRegion->profile->overrideSlot != 0) {
-                channel_num = newRegion->profile->overrideSlot - 1;
-            } else {
-                channel_num = presetNameHashSlot;
-            }
-        } else { // use the manually defined one
-            channel_num = loraConfig.channel_num - 1;
-        }
-
-        // Calculate frequency: freqStart is band edge, add half bandwidth (plus optional padding) to get middle of first channel
-        // subsequent channels are spaced by freqSlotWidth
-        freq = newRegion->freqStart + (bw / 2000) + newRegion->profile->padding + (channel_num * freqSlotWidth); // in MHz
     }
 
     saveChannelNum(channel_num);
     saveFreq(freq + loraConfig.frequency_offset);
-    const char *channelName = channels.getName(channels.getPrimaryIndex());
-
-    if (newRegion->wideLora) {                          // clamp if wide freq range
-        preambleLength = wideLoraPreambleLengthDefault; // 12 is the default for operation above 2GHz
-    } else {
-        preambleLength =
-            preambleLengthDefault; // 8 is default, but we use longer to increase the amount of sleep time when receiving
-    }
 
     slotTimeMsec = computeSlotTimeMsec();
     preambleTimeMsec = preambleLength * (pow_of_2(sf) / bw);
 
     LOG_INFO("Radio freq=%.3f, config.lora.frequency_offset=%.3f", freq, loraConfig.frequency_offset);
-    LOG_INFO("Set radio: region=%s, name=%s, config=%u, ch=%d, power=%d", newRegion->name, channelName, loraConfig.modem_preset,
+    LOG_INFO("Set radio: region=%s, name=%s, config=%u, ch=%d, power=%d", myRegion->name, channelName, loraConfig.modem_preset,
              channel_num, power);
-    LOG_INFO("newRegion->freqStart -> newRegion->freqEnd: %f -> %f (%f MHz)", newRegion->freqStart, newRegion->freqEnd,
-             newRegion->freqEnd - newRegion->freqStart);
-    LOG_INFO("numFreqSlots: %d x %.3fkHz", numFreqSlots, bw);
-    if (newRegion->profile->overrideSlot != 0) {
-        LOG_INFO("Using region override slot: %d", newRegion->profile->overrideSlot);
-    }
+    LOG_INFO("myRegion->freqStart -> myRegion->freqEnd: %f -> %f (%f MHz)", myRegion->freqStart, myRegion->freqEnd,
+             myRegion->freqEnd - myRegion->freqStart);
+    LOG_INFO("numChannels: %d x %.3fkHz", numChannels, bw);
     LOG_INFO("channel_num: %d", channel_num + 1);
     LOG_INFO("frequency: %f", getFreq());
     LOG_INFO("Slot time: %u msec, preamble time: %u msec", slotTimeMsec, preambleTimeMsec);
-} // end of applyModemConfig
+}
 
 /** Slottime is the time to detect a transmission has started, consisting of:
   - CAD duration;
@@ -1174,4 +994,4 @@ size_t RadioInterface::beginSending(meshtastic_MeshPacket *p)
 
     sendingPacket = p;
     return p->encrypted.size + sizeof(PacketHeader);
-}
+}

src/mesh/RadioInterface.h

@@ -92,20 +92,15 @@ class RadioInterface
     uint8_t sf = 9;
     uint8_t cr = 5;
 
-    static constexpr uint8_t NUM_SYM_CAD =
-        2; // Number of symbols used for CAD, 2 is the default since RadioLib 6.3.0 as per AN1200.48
-    static constexpr uint8_t NUM_SYM_CAD_24GHZ =
-        4; // Number of symbols used for CAD in 2.4 GHz, 4 is recommended in AN1200.22 of SX1280
+    const uint8_t NUM_SYM_CAD = 2;       // Number of symbols used for CAD, 2 is the default since RadioLib 6.3.0 as per AN1200.48
+    const uint8_t NUM_SYM_CAD_24GHZ = 4; // Number of symbols used for CAD in 2.4 GHz, 4 is recommended in AN1200.22 of SX1280
     uint32_t slotTimeMsec = computeSlotTimeMsec();
-    uint16_t preambleLength = 16; // 8 is default, but we use longer to increase the amount of sleep time when receiving
-    static constexpr uint16_t preambleLengthDefault =
-        16; // 8 is default, but we use longer to increase the amount of sleep time when receiving
-    static constexpr uint16_t wideLoraPreambleLengthDefault = 12; // 12 is default for wide Lora
-    uint32_t preambleTimeMsec = 165;                              // calculated on startup, this is the default for LongFast
-    static constexpr uint32_t PROCESSING_TIME_MSEC =
-        4500;                           // time to construct, process and construct a packet again (empirically determined)
-    static constexpr uint8_t CWmin = 3; // minimum CWsize
-    static constexpr uint8_t CWmax = 8; // maximum CWsize
+    uint16_t preambleLength = 16;    // 8 is default, but we use longer to increase the amount of sleep time when receiving
+    uint32_t preambleTimeMsec = 165; // calculated on startup, this is the default for LongFast
+    const uint32_t PROCESSING_TIME_MSEC =
+        4500;                // time to construct, process and construct a packet again (empirically determined)
+    const uint8_t CWmin = 3; // minimum CWsize
+    const uint8_t CWmax = 8; // maximum CWsize
 
     meshtastic_MeshPacket *sendingPacket = NULL; // The packet we are currently sending
     uint32_t lastTxStart = 0L;
@@ -132,7 +127,7 @@ class RadioInterface
      * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
      * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
      */
-    // static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig); // maybe superseded?
+    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
 
     /**
      * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
@@ -239,20 +234,6 @@ class RadioInterface
     // Whether we use the default frequency slot given our LoRa config (region and modem preset)
     static bool uses_default_frequency_slot;
 
-    // Whether we have a custom channel name
-    static bool uses_custom_channel_name;
-
-    static bool checkOrClampConfigLora(meshtastic_Config_LoRaConfig &loraConfig, bool clamp);
-
-    // Check if a candidate region is compatible and valid.
-    static bool validateConfigRegion(const meshtastic_Config_LoRaConfig &loraConfig);
-
-    // Check if a candidate radio configuration is valid.
-    static bool validateConfigLora(const meshtastic_Config_LoRaConfig &loraConfig);
-
-    // Make a candidate radio configuration valid, even if it isn't.
-    static void clampConfigLora(meshtastic_Config_LoRaConfig &loraConfig);
-
   protected:
     int8_t power = 17; // Set by applyModemConfig()
 

src/mesh/RadioLibInterface.cpp

@@ -46,16 +46,6 @@ RadioLibInterface::RadioLibInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE c
 #endif
 }
 
-RadioLibInterface::~RadioLibInterface()
-{
-    // If the static `instance` pointer still references us, clear it.
-    // A later successful init() may have replaced `instance` with a newer
-    // interface — don't clobber that case.
-    if (instance == this) {
-        instance = nullptr;
-    }
-}
-
 #ifdef ARCH_ESP32
 // ESP32 doesn't use that flag
 #define YIELD_FROM_ISR(x) portYIELD_FROM_ISR()

src/mesh/RadioLibInterface.h

@@ -136,13 +136,6 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
     RadioLibInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
                       RADIOLIB_PIN_TYPE busy, PhysicalLayer *iface = NULL);
 
-    /**
-     * Clear the static `instance` pointer if it still points at us, so callers
-     * that check `RadioLibInterface::instance != nullptr` don't dereference a
-     * freed object after a failed init() + unique_ptr reset.
-     */
-    virtual ~RadioLibInterface();
-
     virtual ErrorCode send(meshtastic_MeshPacket *p) override;
 
     /**

src/mesh/Router.cpp

@@ -11,9 +11,6 @@
 #include "mesh-pb-constants.h"
 #include "meshUtils.h"
 #include "modules/RoutingModule.h"
-#if HAS_TRAFFIC_MANAGEMENT
-#include "modules/TrafficManagementModule.h"
-#endif
 #if !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #endif
@@ -98,20 +95,6 @@ bool Router::shouldDecrementHopLimit(const meshtastic_MeshPacket *p)
         return true;
     }
 
-#if HAS_TRAFFIC_MANAGEMENT
-    // When router_preserve_hops is enabled, preserve hops for decoded packets that are not
-    // position or telemetry (those have their own exhaust_hop controls).
-    if (moduleConfig.has_traffic_management && moduleConfig.traffic_management.enabled &&
-        moduleConfig.traffic_management.router_preserve_hops && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
-        p->decoded.portnum != meshtastic_PortNum_POSITION_APP && p->decoded.portnum != meshtastic_PortNum_TELEMETRY_APP) {
-        LOG_DEBUG("Router hop preserved: port=%d from=0x%08x (traffic_management)", p->decoded.portnum, getFrom(p));
-        if (trafficManagementModule) {
-            trafficManagementModule->recordRouterHopPreserved();
-        }
-        return false;
-    }
-#endif
-
     // For subsequent hops, check if previous relay is a favorite router
     // Optimized search for favorite routers with matching last byte
     // Check ordering optimized for IoT devices (cheapest checks first)
@@ -499,9 +482,9 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
                 meshtastic_Data decodedtmp;
                 memset(&decodedtmp, 0, sizeof(decodedtmp));
                 if (!pb_decode_from_bytes(bytes, rawSize, &meshtastic_Data_msg, &decodedtmp)) {
-                    LOG_DEBUG("Invalid protobufs in received mesh packet id=0x%08x (bad psk?)", p->id);
+                    LOG_ERROR("Invalid protobufs in received mesh packet id=0x%08x (bad psk?)!", p->id);
                 } else if (decodedtmp.portnum == meshtastic_PortNum_UNKNOWN_APP) {
-                    LOG_DEBUG("Invalid portnum (bad psk?)");
+                    LOG_ERROR("Invalid portnum (bad psk?)!");
 #if !(MESHTASTIC_EXCLUDE_PKI)
                 } else if (!owner.is_licensed && isToUs(p) && decodedtmp.portnum == meshtastic_PortNum_TEXT_MESSAGE_APP) {
                     LOG_WARN("Rejecting legacy DM");
@@ -875,12 +858,6 @@ void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)
         return;
     }
 
-    if (shouldDropPacketForPreHop(*p)) {
-        logHopStartDrop(*p, "pre-hop drop");
-        packetPool.release(p);
-        return;
-    }
-
     if (shouldFilterReceived(p)) {
         LOG_DEBUG("Incoming msg was filtered from 0x%x", p->from);
         packetPool.release(p);

src/mesh/SX126xInterface.cpp

@@ -245,21 +245,14 @@ template <typename T> bool SX126xInterface<T>::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
-    limitPower(SX126X_MAX_POWER);
-    // Make sure we reach the minimum power supported to turn the chip on (-9dBm)
-    if (power < -9)
-        power = -9;
+    if (power > SX126X_MAX_POWER) // This chip has lower power limits than some
+        power = SX126X_MAX_POWER;
 
     err = lora.setOutputPower(power);
     if (err != RADIOLIB_ERR_NONE)
         LOG_ERROR("SX126X setOutputPower %s%d", radioLibErr, err);
     assert(err == RADIOLIB_ERR_NONE);
 
-    // Apply RX gain mode — valid in STDBY (datasheet §9.6), matches resetAGC() pattern
-    err = lora.setRxBoostedGainMode(config.lora.sx126x_rx_boosted_gain);
-    if (err != RADIOLIB_ERR_NONE)
-        LOG_WARN("SX126X setRxBoostedGainMode %s%d", radioLibErr, err);
-
     startReceive(); // restart receiving
 
     return RADIOLIB_ERR_NONE;

src/mesh/SX128xInterface.cpp

@@ -144,7 +144,8 @@ template <typename T> bool SX128xInterface<T>::reconfigure()
     if (err != RADIOLIB_ERR_NONE)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
-    limitPower(SX128X_MAX_POWER);
+    if (power > SX128X_MAX_POWER) // This chip has lower power limits than some
+        power = SX128X_MAX_POWER;
 
     err = lora.setOutputPower(power);
     if (err != RADIOLIB_ERR_NONE)

src/mesh/TypeConversions.cpp

@@ -1,6 +1,7 @@
 #include "TypeConversions.h"
 #include "mesh/generated/meshtastic/deviceonly.pb.h"
 #include "mesh/generated/meshtastic/mesh.pb.h"
+#include "meshUtils.h"
 
 meshtastic_NodeInfo TypeConversions::ConvertToNodeInfo(const meshtastic_NodeInfoLite *lite)
 {
@@ -82,8 +83,10 @@ meshtastic_UserLite TypeConversions::ConvertToUserLite(meshtastic_User user)
 
     strncpy(lite.long_name, user.long_name, sizeof(lite.long_name));
     lite.long_name[sizeof(lite.long_name) - 1] = '\0';
+    sanitizeUtf8(lite.long_name, sizeof(lite.long_name));
     strncpy(lite.short_name, user.short_name, sizeof(lite.short_name));
     lite.short_name[sizeof(lite.short_name) - 1] = '\0';
+    sanitizeUtf8(lite.short_name, sizeof(lite.short_name));
     lite.hw_model = user.hw_model;
     lite.role = user.role;
     lite.is_licensed = user.is_licensed;
@@ -102,8 +105,10 @@ meshtastic_User TypeConversions::ConvertToUser(uint32_t nodeNum, meshtastic_User
     snprintf(user.id, sizeof(user.id), "!%08x", nodeNum);
     strncpy(user.long_name, lite.long_name, sizeof(user.long_name));
     user.long_name[sizeof(user.long_name) - 1] = '\0';
+    sanitizeUtf8(user.long_name, sizeof(user.long_name));
     strncpy(user.short_name, lite.short_name, sizeof(user.short_name));
     user.short_name[sizeof(user.short_name) - 1] = '\0';
+    sanitizeUtf8(user.short_name, sizeof(user.short_name));
     user.hw_model = lite.hw_model;
     user.role = lite.role;
     user.is_licensed = lite.is_licensed;

src/mesh/generated/meshtastic/config.pb.h

@@ -289,7 +289,14 @@ typedef enum _meshtastic_Config_LoRaConfig_RegionCode {
     /* ITU Region 1 Amateur Radio 2m band (144-146 MHz) */
     meshtastic_Config_LoRaConfig_RegionCode_ITU1_2M = 27,
     /* ITU Region 2 / 3 Amateur Radio 2m band (144-148 MHz) */
-    meshtastic_Config_LoRaConfig_RegionCode_ITU23_2M = 28
+    meshtastic_Config_LoRaConfig_RegionCode_ITU23_2M = 28,
+    /* EU 866MHz band (Band no. 47b of 2006/771/EC and subsequent amendments) for Non-specific short-range devices (SRD) */
+    meshtastic_Config_LoRaConfig_RegionCode_EU_866 = 29,
+    /* EU 874MHz and 917MHz bands (Band no. 1 and 4 of 2022/172/EC and subsequent amendments) for Non-specific short-range devices (SRD) */
+    meshtastic_Config_LoRaConfig_RegionCode_EU_874 = 30,
+    meshtastic_Config_LoRaConfig_RegionCode_EU_917 = 31,
+    /* EU 868MHz band, with narrow presets */
+    meshtastic_Config_LoRaConfig_RegionCode_EU_N_868 = 32
 } meshtastic_Config_LoRaConfig_RegionCode;
 
 /* Standard predefined channel settings
@@ -319,7 +326,24 @@ typedef enum _meshtastic_Config_LoRaConfig_ModemPreset {
     meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO = 8,
     /* Long Range - Turbo
  This preset performs similarly to LongFast, but with 500Khz bandwidth. */
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO = 9
+    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO = 9,
+    /* Lite Fast
+ Medium range preset optimized for EU 866MHz SRD band with 125kHz bandwidth.
+ Comparable link budget to MEDIUM_FAST but compliant with Band no. 47b of 2006/771/EC. */
+    meshtastic_Config_LoRaConfig_ModemPreset_LITE_FAST = 10,
+    /* Lite Slow
+ Medium-to-moderate range preset optimized for EU 866MHz SRD band with 125kHz bandwidth.
+ Comparable link budget to LONG_FAST but compliant with Band no. 47b of 2006/771/EC. */
+    meshtastic_Config_LoRaConfig_ModemPreset_LITE_SLOW = 11,
+    /* Narrow Fast
+ Medium-to-moderate range preset optimized for EU 868MHz band with 62.5kHz bandwidth.
+ Comparable link budget to SHORT_SLOW, but with half the data rate.
+ Intended to avoid interference with other devices. */
+    meshtastic_Config_LoRaConfig_ModemPreset_NARROW_FAST = 12,
+    /* Narrow Slow
+ Moderate range preset optimized for EU 868MHz band with 62.5kHz bandwidth.
+ Comparable link budget and data rate to LONG_FAST. */
+    meshtastic_Config_LoRaConfig_ModemPreset_NARROW_SLOW = 13
 } meshtastic_Config_LoRaConfig_ModemPreset;
 
 typedef enum _meshtastic_Config_LoRaConfig_FEM_LNA_Mode {
@@ -706,12 +730,12 @@ extern "C" {
 #define _meshtastic_Config_DisplayConfig_CompassOrientation_ARRAYSIZE ((meshtastic_Config_DisplayConfig_CompassOrientation)(meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED+1))
 
 #define _meshtastic_Config_LoRaConfig_RegionCode_MIN meshtastic_Config_LoRaConfig_RegionCode_UNSET
-#define _meshtastic_Config_LoRaConfig_RegionCode_MAX meshtastic_Config_LoRaConfig_RegionCode_ITU23_2M
-#define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_ITU23_2M+1))
+#define _meshtastic_Config_LoRaConfig_RegionCode_MAX meshtastic_Config_LoRaConfig_RegionCode_EU_N_868
+#define _meshtastic_Config_LoRaConfig_RegionCode_ARRAYSIZE ((meshtastic_Config_LoRaConfig_RegionCode)(meshtastic_Config_LoRaConfig_RegionCode_EU_N_868+1))
 
 #define _meshtastic_Config_LoRaConfig_ModemPreset_MIN meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST
-#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO
-#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO+1))
+#define _meshtastic_Config_LoRaConfig_ModemPreset_MAX meshtastic_Config_LoRaConfig_ModemPreset_NARROW_SLOW
+#define _meshtastic_Config_LoRaConfig_ModemPreset_ARRAYSIZE ((meshtastic_Config_LoRaConfig_ModemPreset)(meshtastic_Config_LoRaConfig_ModemPreset_NARROW_SLOW+1))
 
 #define _meshtastic_Config_LoRaConfig_FEM_LNA_Mode_MIN meshtastic_Config_LoRaConfig_FEM_LNA_Mode_DISABLED
 #define _meshtastic_Config_LoRaConfig_FEM_LNA_Mode_MAX meshtastic_Config_LoRaConfig_FEM_LNA_Mode_NOT_PRESENT

src/mesh/generated/meshtastic/mesh.pb.h

@@ -315,6 +315,8 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_THINKNODE_M7 = 129,
     meshtastic_HardwareModel_THINKNODE_M8 = 130,
     meshtastic_HardwareModel_THINKNODE_M9 = 131,
+    /* The Heltec-V4-R8 uses an ESP32S3R8 chip, plus an SX1262. */
+    meshtastic_HardwareModel_HELTEC_V4_R8 = 132,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */

src/mesh/mesh-pb-constants.h

@@ -69,22 +69,6 @@ static inline int get_max_num_nodes()
 /// Max number of channels allowed
 #define MAX_NUM_CHANNELS (member_size(meshtastic_ChannelFile, channels) / member_size(meshtastic_ChannelFile, channels[0]))
 
-// Traffic Management module configuration
-// Enable per-variant by defining HAS_TRAFFIC_MANAGEMENT=1 in variant.h
-#ifndef HAS_TRAFFIC_MANAGEMENT
-#define HAS_TRAFFIC_MANAGEMENT 0
-#endif
-
-// Cache size for traffic management (number of nodes to track)
-// Can be overridden per-variant based on available memory
-#ifndef TRAFFIC_MANAGEMENT_CACHE_SIZE
-#if HAS_TRAFFIC_MANAGEMENT
-#define TRAFFIC_MANAGEMENT_CACHE_SIZE 1000
-#else
-#define TRAFFIC_MANAGEMENT_CACHE_SIZE 0
-#endif
-#endif
-
 /// helper function for encoding a record as a protobuf, any failures to encode are fatal and we will panic
 /// returns the encoded packet size
 size_t pb_encode_to_bytes(uint8_t *destbuf, size_t destbufsize, const pb_msgdesc_t *fields, const void *src_struct);
@@ -106,4 +90,4 @@ bool writecb(pb_ostream_t *stream, const uint8_t *buf, size_t count);
  */
 bool is_in_helper(uint32_t n, const uint32_t *array, pb_size_t count);
 
-#define is_in_repeated(name, n) is_in_helper(n, name, name##_count)
+#define is_in_repeated(name, n) is_in_helper(n, name, name##_count)

src/meshUtils.cpp

@@ -117,4 +117,93 @@ size_t pb_string_length(const char *str, size_t max_len)
         }
     }
     return len;
+}
+
+bool sanitizeUtf8(char *buf, size_t bufSize)
+{
+    if (!buf || bufSize == 0)
+        return false;
+
+    // Ensure null-terminated within buffer
+    buf[bufSize - 1] = '\0';
+
+    bool replaced = false;
+    size_t i = 0;
+    size_t len = strlen(buf);
+
+    while (i < len) {
+        uint8_t b = (uint8_t)buf[i];
+
+        // Determine expected sequence length from lead byte
+        size_t seqLen;
+        uint32_t minCodepoint;
+        if (b <= 0x7F) {
+            // ASCII — valid single byte
+            i++;
+            continue;
+        } else if ((b & 0xE0) == 0xC0) {
+            seqLen = 2;
+            minCodepoint = 0x80; // Reject overlong
+        } else if ((b & 0xF0) == 0xE0) {
+            seqLen = 3;
+            minCodepoint = 0x800;
+        } else if ((b & 0xF8) == 0xF0) {
+            seqLen = 4;
+            minCodepoint = 0x10000;
+        } else {
+            // Invalid lead byte (0x80-0xBF or 0xF8+)
+            buf[i] = '?';
+            replaced = true;
+            i++;
+            continue;
+        }
+
+        // Check that we have enough bytes remaining
+        if (i + seqLen > len) {
+            // Truncated sequence at end of string — replace remaining bytes
+            for (size_t j = i; j < len; j++) {
+                buf[j] = '?';
+            }
+            replaced = true;
+            break;
+        }
+
+        // Validate continuation bytes (must be 10xxxxxx)
+        bool valid = true;
+        for (size_t j = 1; j < seqLen; j++) {
+            if (((uint8_t)buf[i + j] & 0xC0) != 0x80) {
+                valid = false;
+                break;
+            }
+        }
+
+        if (valid) {
+            // Decode codepoint to check for overlong encodings and surrogates
+            uint32_t cp = 0;
+            if (seqLen == 2)
+                cp = b & 0x1F;
+            else if (seqLen == 3)
+                cp = b & 0x0F;
+            else
+                cp = b & 0x07;
+            for (size_t j = 1; j < seqLen; j++)
+                cp = (cp << 6) | ((uint8_t)buf[i + j] & 0x3F);
+
+            if (cp < minCodepoint || cp > 0x10FFFF || (cp >= 0xD800 && cp <= 0xDFFF)) {
+                // Overlong encoding, out of Unicode range, or surrogate half
+                valid = false;
+            }
+        }
+
+        if (valid) {
+            i += seqLen;
+        } else {
+            // Replace only the lead byte; continuation bytes will be caught on next iteration
+            buf[i] = '?';
+            replaced = true;
+            i++;
+        }
+    }
+
+    return replaced;
 }

src/meshUtils.h

@@ -11,24 +11,6 @@ template <class T> constexpr const T &clamp(const T &v, const T &lo, const T &hi
     return (v < lo) ? lo : (hi < v) ? hi : v;
 }
 
-/// Return the smallest power of 2 >= n (undefined for n > 2^31)
-static inline uint32_t nextPowerOf2(uint32_t n)
-{
-    if (n <= 1)
-        return 1;
-#if defined(__GNUC__)
-    return 1U << (32 - __builtin_clz(n - 1));
-#else
-    n--;
-    n |= n >> 1;
-    n |= n >> 2;
-    n |= n >> 4;
-    n |= n >> 8;
-    n |= n >> 16;
-    return n + 1;
-#endif
-}
-
 #if HAS_SCREEN
 #define IF_SCREEN(X)                                                                                                             \
     if (screen) {                                                                                                                \
@@ -56,6 +38,10 @@ const std::string vformat(const char *const zcFormat, ...);
 // Get actual string length for nanopb char array fields.
 size_t pb_string_length(const char *str, size_t max_len);
 
+// Sanitize a fixed-size char buffer in-place by replacing invalid UTF-8 sequences with '?'.
+// Ensures the result is null-terminated within bufSize. Returns true if any bytes were replaced.
+bool sanitizeUtf8(char *buf, size_t bufSize);
+
 /// Calculate 2^n without calling pow() - used for spreading factor and other calculations
 inline uint32_t pow_of_2(uint32_t n)
 {

src/modules/AdminModule.cpp

@@ -24,9 +24,7 @@
 
 #include "Default.h"
 #include "MeshRadio.h"
-#include "RadioInterface.h"
 #include "TypeConversions.h"
-#include "mesh/RadioLibInterface.h"
 
 #if !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
@@ -199,35 +197,10 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         handleSetOwner(r->set_owner);
         break;
 
-    case meshtastic_AdminMessage_set_config_tag: {
+    case meshtastic_AdminMessage_set_config_tag:
         LOG_DEBUG("Client set config");
-
-        // Non-LoRa configs need no further validation.
-        if (r->set_config.which_payload_variant != meshtastic_Config_lora_tag) {
-            LOG_DEBUG("Non-LoRa config, applying directly");
-            handleSetConfig(r->set_config, fromOthers);
-            break;
-        }
-
-        // Only LORA_24 requires hardware capability validation.
-        if (r->set_config.payload_variant.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24) {
-            LOG_DEBUG("LoRa config, region is not LORA_24, applying directly");
-            handleSetConfig(r->set_config, fromOthers);
-            break;
-        }
-
-        // Hardware supports 2.4 GHz — apply the config.
-        // Fail closed: null instance is treated as incapable.
-        if (RadioLibInterface::instance && RadioLibInterface::instance->wideLora()) {
-            LOG_DEBUG("LORA_24 requested, radio hardware supports 2.4 GHz, applying");
-            handleSetConfig(r->set_config, fromOthers);
-            break;
-        }
-
-        LOG_WARN("Radio hardware does not support 2.4 GHz; rejecting LORA_24 region");
-        myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
+        handleSetConfig(r->set_config);
         break;
-    }
 
     case meshtastic_AdminMessage_set_module_config_tag:
         LOG_DEBUG("Client set module config");
@@ -480,7 +453,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
 #if HAS_SCREEN
         IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
 #endif
-#if defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
+#if defined(ARCH_NRF52) || defined(ARCH_RP2040)
         enterDfuMode();
 #endif
         break;
@@ -626,10 +599,14 @@ void AdminModule::handleSetOwner(const meshtastic_User &o)
     if (*o.long_name) {
         changed |= strcmp(owner.long_name, o.long_name);
         strncpy(owner.long_name, o.long_name, sizeof(owner.long_name));
+        owner.long_name[sizeof(owner.long_name) - 1] = '\0';
+        sanitizeUtf8(owner.long_name, sizeof(owner.long_name));
     }
     if (*o.short_name) {
         changed |= strcmp(owner.short_name, o.short_name);
         strncpy(owner.short_name, o.short_name, sizeof(owner.short_name));
+        owner.short_name[sizeof(owner.short_name) - 1] = '\0';
+        sanitizeUtf8(owner.short_name, sizeof(owner.short_name));
     }
     snprintf(owner.id, sizeof(owner.id), "!%08x", nodeDB->getNodeNum());
 
@@ -653,7 +630,7 @@ void AdminModule::handleSetOwner(const meshtastic_User &o)
     }
 }
 
-void AdminModule::handleSetConfig(const meshtastic_Config &c, bool fromOthers)
+void AdminModule::handleSetConfig(const meshtastic_Config &c)
 {
     auto changes = SEGMENT_CONFIG;
     auto existingRole = config.device.role;
@@ -797,57 +774,18 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c, bool fromOthers)
             validatedLora.spread_factor = LORA_SF_DEFAULT;
         }
 
-        // If we're setting a new region, check the region is valid and then init the region or discard the change
-        if (validatedLora.region != myRegion->code) {
-            //  Region has changed so check whether it is valid for e.g. licensing conditions and if the lora config is valid
-            if (RadioInterface::validateConfigRegion(validatedLora) && RadioInterface::validateConfigLora(validatedLora)) {
-                // If we're setting region for the first time, init the region and regenerate the keys
-                if (isRegionUnset && validatedLora.region > meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
-                    if (crypto) {
-                        crypto->ensurePkiKeys(config.security, owner);
-                    }
-#endif
-                    // new region is valid and we're coming from an unset region, so enable tx
-                    validatedLora.tx_enabled = true;
-                }
-                // If we're unsetting the region for some reason, disable tx
-                if (!isRegionUnset && validatedLora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-                    validatedLora.tx_enabled = false;
-                }
-                // Ensure initRegion() uses the newly validated region
-                config.lora.region = validatedLora.region;
-                initRegion();
-                if (myRegion->dutyCycle < 100) {
-                    validatedLora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
-                }
-                if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
-                    //  Default root is in use, so subscribe to the appropriate MQTT topic for this region
-                    sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
-                }
-                changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
-            } else {
-                //  Region validation has failed, so just copy all of the old config over the new config
-                validatedLora = oldLoraConfig;
-            }
-        } // end of new region handling
-
-        if (!RadioInterface::validateConfigLora(validatedLora)) {
-            if (fromOthers) {
-                LOG_WARN("Invalid LoRa config received from another node, rejecting changes");
-                //  modem_preset set to use the old setting if the check fails
-                validatedLora.modem_preset = oldLoraConfig.modem_preset;
-            } else {
-                LOG_WARN("Invalid LoRa config received from client, using corrected values");
-                RadioInterface::clampConfigLora(validatedLora);
-            }
-            //  use_preset and bandwidth are coerced into valid values by the check.
+        // If no lora radio parameters change, don't need to reboot
+        if (oldLoraConfig.use_preset == validatedLora.use_preset && oldLoraConfig.region == validatedLora.region &&
+            oldLoraConfig.modem_preset == validatedLora.modem_preset && oldLoraConfig.bandwidth == validatedLora.bandwidth &&
+            oldLoraConfig.spread_factor == validatedLora.spread_factor &&
+            oldLoraConfig.coding_rate == validatedLora.coding_rate && oldLoraConfig.tx_power == validatedLora.tx_power &&
+            oldLoraConfig.frequency_offset == validatedLora.frequency_offset &&
+            oldLoraConfig.override_frequency == validatedLora.override_frequency &&
+            oldLoraConfig.channel_num == validatedLora.channel_num &&
+            oldLoraConfig.sx126x_rx_boosted_gain == validatedLora.sx126x_rx_boosted_gain) {
+            requiresReboot = false;
         }
 
-        // All LoRa radio changes apply live via configChanged observer → reconfigure().
-        // reconfigure() puts the radio in standby, reprograms all modem parameters, and restarts receive.
-        requiresReboot = false;
-
 #if defined(ARCH_PORTDUINO)
         // If running on portduino and using SimRadio, do not require reboot
         if (SimRadio::instance) {
@@ -863,21 +801,63 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c, bool fromOthers)
             digitalWrite(RF95_FAN_EN, HIGH ^ 0);
         }
 #endif
+        config.lora = validatedLora;
 
 #if HAS_LORA_FEM
         // Apply FEM LNA mode from config (only meaningful on hardware that supports it)
-        // Note that a rejected lora config will revert this as well.
         if (loraFEMInterface.isLnaCanControl()) {
-            loraFEMInterface.setLNAEnable(validatedLora.fem_lna_mode != meshtastic_Config_LoRaConfig_FEM_LNA_Mode_DISABLED);
-        } else if (validatedLora.fem_lna_mode != meshtastic_Config_LoRaConfig_FEM_LNA_Mode_NOT_PRESENT) {
+            loraFEMInterface.setLNAEnable(config.lora.fem_lna_mode != meshtastic_Config_LoRaConfig_FEM_LNA_Mode_DISABLED);
+        } else if (config.lora.fem_lna_mode != meshtastic_Config_LoRaConfig_FEM_LNA_Mode_NOT_PRESENT) {
             // Hardware FEM does not support LNA control; normalize stored config to match actual capability
             LOG_WARN("FEM LNA mode configured but current FEM does not support LNA control; normalizing to NOT_PRESENT");
-            validatedLora.fem_lna_mode = meshtastic_Config_LoRaConfig_FEM_LNA_Mode_NOT_PRESENT;
+            config.lora.fem_lna_mode = meshtastic_Config_LoRaConfig_FEM_LNA_Mode_NOT_PRESENT;
         }
 #endif
+        // If we're setting region for the first time, init the region and regenerate the keys
+        if (isRegionUnset && config.lora.region > meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
+            if (!owner.is_licensed) {
+                bool keygenSuccess = false;
+                if (config.security.private_key.size == 32) {
+                    if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
+                        keygenSuccess = true;
+                    }
+                } else {
+                    LOG_INFO("Generate new PKI keys");
+                    crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
+                    keygenSuccess = true;
+                }
+                if (keygenSuccess) {
+                    config.security.public_key.size = 32;
+                    config.security.private_key.size = 32;
+                    owner.public_key.size = 32;
+                    memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
+                }
+            }
+#endif
+            config.lora.tx_enabled = true;
+            initRegion();
+            if (myRegion->dutyCycle < 100) {
+                config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
+            }
+            //  Compare the entire string, we are sure of the length as a topic has never been set
+            if (strcmp(moduleConfig.mqtt.root, default_mqtt_root) == 0) {
+                sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
+                changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
+            }
+        }
+        if (config.lora.region != myRegion->code) {
+            //  Region has changed so check whether there is a regulatory one we should be using instead.
+            //  Additionally as a side-effect, assume a new value under myRegion
+            initRegion();
 
-        config.lora = validatedLora; // Finally, return the validated config back to the main config
+            if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
+                //  Default root is in use, so subscribe to the appropriate MQTT topic for this region
+                sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
+            }
 
+            changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
+        }
         break;
     }
     case meshtastic_Config_bluetooth_tag:
@@ -925,10 +905,10 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c, bool fromOthers)
     }
     if (requiresReboot && !hasOpenEditTransaction) {
         disableBluetooth();
-    } // end of switch case which_payload_variant
+    }
 
     saveChanges(changes, requiresReboot);
-} // end of handleSetConfig
+}
 
 bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
 {
@@ -1034,11 +1014,6 @@ bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
         moduleConfig.statusmessage = c.payload_variant.statusmessage;
         shouldReboot = false;
         break;
-    case meshtastic_ModuleConfig_traffic_management_tag:
-        LOG_INFO("Set module config: Traffic Management");
-        moduleConfig.has_traffic_management = true;
-        moduleConfig.traffic_management = c.payload_variant.traffic_management;
-        break;
     }
     saveChanges(SEGMENT_MODULECONFIG, shouldReboot);
     return true;
@@ -1153,85 +1128,78 @@ void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const
     meshtastic_AdminMessage res = meshtastic_AdminMessage_init_default;
 
     if (req.decoded.want_response) {
-        const char *configName = "?";
         switch (configType) {
         case meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG:
-            configName = "MQTT";
+            LOG_INFO("Get module config: MQTT");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_mqtt_tag;
             res.get_module_config_response.payload_variant.mqtt = moduleConfig.mqtt;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_SERIAL_CONFIG:
-            configName = "Serial";
+            LOG_INFO("Get module config: Serial");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_serial_tag;
             res.get_module_config_response.payload_variant.serial = moduleConfig.serial;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_EXTNOTIF_CONFIG:
-            configName = "External Notification";
+            LOG_INFO("Get module config: External Notification");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_external_notification_tag;
             res.get_module_config_response.payload_variant.external_notification = moduleConfig.external_notification;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_STOREFORWARD_CONFIG:
-            configName = "Store & Forward";
+            LOG_INFO("Get module config: Store & Forward");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_store_forward_tag;
             res.get_module_config_response.payload_variant.store_forward = moduleConfig.store_forward;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_RANGETEST_CONFIG:
-            configName = "Range Test";
+            LOG_INFO("Get module config: Range Test");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_range_test_tag;
             res.get_module_config_response.payload_variant.range_test = moduleConfig.range_test;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_TELEMETRY_CONFIG:
-            configName = "Telemetry";
+            LOG_INFO("Get module config: Telemetry");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_telemetry_tag;
             res.get_module_config_response.payload_variant.telemetry = moduleConfig.telemetry;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG:
-            configName = "Canned Message";
+            LOG_INFO("Get module config: Canned Message");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_canned_message_tag;
             res.get_module_config_response.payload_variant.canned_message = moduleConfig.canned_message;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_AUDIO_CONFIG:
-            configName = "Audio";
+            LOG_INFO("Get module config: Audio");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_audio_tag;
             res.get_module_config_response.payload_variant.audio = moduleConfig.audio;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_REMOTEHARDWARE_CONFIG:
-            configName = "Remote Hardware";
+            LOG_INFO("Get module config: Remote Hardware");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_remote_hardware_tag;
             res.get_module_config_response.payload_variant.remote_hardware = moduleConfig.remote_hardware;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_NEIGHBORINFO_CONFIG:
-            configName = "Neighbor Info";
+            LOG_INFO("Get module config: Neighbor Info");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_neighbor_info_tag;
             res.get_module_config_response.payload_variant.neighbor_info = moduleConfig.neighbor_info;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG:
-            configName = "Detection Sensor";
+            LOG_INFO("Get module config: Detection Sensor");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_detection_sensor_tag;
             res.get_module_config_response.payload_variant.detection_sensor = moduleConfig.detection_sensor;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_AMBIENTLIGHTING_CONFIG:
-            configName = "Ambient Lighting";
+            LOG_INFO("Get module config: Ambient Lighting");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_ambient_lighting_tag;
             res.get_module_config_response.payload_variant.ambient_lighting = moduleConfig.ambient_lighting;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG:
-            configName = "Paxcounter";
+            LOG_INFO("Get module config: Paxcounter");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             res.get_module_config_response.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG:
-            configName = "StatusMessage";
+            LOG_INFO("Get module config: StatusMessage");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_statusmessage_tag;
             res.get_module_config_response.payload_variant.statusmessage = moduleConfig.statusmessage;
             break;
-        case meshtastic_AdminMessage_ModuleConfigType_TRAFFICMANAGEMENT_CONFIG:
-            configName = "Traffic Management";
-            res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_traffic_management_tag;
-            res.get_module_config_response.payload_variant.traffic_management = moduleConfig.traffic_management;
-            break;
         }
-        LOG_INFO("Get module config: %s", configName);
 
         // NOTE: The phone app needs to know the ls_secsvalue so it can properly expect sleep behavior.
         // So even if we internally use 0 to represent 'use default' we still need to send the value we are
@@ -1414,23 +1382,33 @@ void AdminModule::handleStoreDeviceUIConfig(const meshtastic_DeviceUIConfig &uic
 void AdminModule::handleSetHamMode(const meshtastic_HamParameters &p)
 {
     // Validate ham parameters before setting since this would bypass validation in the owner struct
-    const char *fieldsToCheck[] = {p.call_sign, p.short_name};
-    const char *fieldNames[] = {"call_sign", "short_name"};
-    for (int i = 0; i < 2; i++) {
-        if (*fieldsToCheck[i]) {
-            const char *start = fieldsToCheck[i];
-            while (*start && isspace((unsigned char)*start))
-                start++;
-            if (*start == '\0') {
-                LOG_WARN("Rejected ham %s: must contain at least 1 non-whitespace character", fieldNames[i]);
-                return;
-            }
+    if (*p.call_sign) {
+        const char *start = p.call_sign;
+        // Skip all whitespace
+        while (*start && isspace((unsigned char)*start))
+            start++;
+        if (*start == '\0') {
+            LOG_WARN("Rejected ham call_sign: must contain at least 1 non-whitespace character");
+            return;
+        }
+    }
+    if (*p.short_name) {
+        const char *start = p.short_name;
+        while (*start && isspace((unsigned char)*start))
+            start++;
+        if (*start == '\0') {
+            LOG_WARN("Rejected ham short_name: must contain at least 1 non-whitespace character");
+            return;
         }
     }
 
     // Set call sign and override lora limitations for licensed use
     strncpy(owner.long_name, p.call_sign, sizeof(owner.long_name));
+    owner.long_name[sizeof(owner.long_name) - 1] = '\0';
+    sanitizeUtf8(owner.long_name, sizeof(owner.long_name));
     strncpy(owner.short_name, p.short_name, sizeof(owner.short_name));
+    owner.short_name[sizeof(owner.short_name) - 1] = '\0';
+    sanitizeUtf8(owner.short_name, sizeof(owner.short_name));
     owner.is_licensed = true;
     config.lora.override_duty_cycle = true;
     config.lora.tx_power = p.tx_power;

src/modules/AdminModule.h

@@ -60,11 +60,7 @@ class AdminModule : public ProtobufModule<meshtastic_AdminMessage>, public Obser
      */
     void handleSetOwner(const meshtastic_User &o);
     void handleSetChannel(const meshtastic_Channel &cc);
-
-  protected:
-    void handleSetConfig(const meshtastic_Config &c, bool fromOthers);
-
-  private:
+    void handleSetConfig(const meshtastic_Config &c);
     bool handleSetModuleConfig(const meshtastic_ModuleConfig &c);
     void handleSetChannel();
     void handleSetHamMode(const meshtastic_HamParameters &req);

src/modules/Modules.cpp

@@ -38,9 +38,6 @@
 #include "modules/PowerStressModule.h"
 #endif
 #include "modules/RoutingModule.h"
-#if HAS_TRAFFIC_MANAGEMENT && !MESHTASTIC_EXCLUDE_TRAFFIC_MANAGEMENT
-#include "modules/TrafficManagementModule.h"
-#endif
 #include "modules/TextMessageModule.h"
 #if !MESHTASTIC_EXCLUDE_TRACEROUTE
 #include "modules/TraceRouteModule.h"
@@ -123,14 +120,6 @@ void setupModules()
 #if !MESHTASTIC_EXCLUDE_REPLYBOT
     new ReplyBotModule();
 #endif
-
-#if HAS_TRAFFIC_MANAGEMENT && !MESHTASTIC_EXCLUDE_TRAFFIC_MANAGEMENT
-    // Instantiate only when enabled to avoid extra memory use and background work.
-    if (moduleConfig.has_traffic_management && moduleConfig.traffic_management.enabled) {
-        trafficManagementModule = new TrafficManagementModule();
-    }
-#endif
-
 #if !MESHTASTIC_EXCLUDE_ADMIN
     adminModule = new AdminModule();
 #endif

src/modules/PositionModule.cpp

@@ -492,24 +492,15 @@ void PositionModule::sendLostAndFoundText()
 {
     meshtastic_MeshPacket *p = allocDataPacket();
     p->to = NODENUM_BROADCAST;
-    char message[128];
-    int written = snprintf(message, sizeof(message), "🚨I'm lost! Lat / Lon: %f, %f\a", (lastGpsLatitude * 1e-7),
-                           (lastGpsLongitude * 1e-7));
+    char *message = new char[60];
+    sprintf(message, "🚨I'm lost! Lat / Lon: %f, %f\a", (lastGpsLatitude * 1e-7), (lastGpsLongitude * 1e-7));
     p->decoded.portnum = meshtastic_PortNum_TEXT_MESSAGE_APP;
     p->want_ack = false;
-    if (written < 0) {
-        // snprintf encoding error — send an empty payload rather than uninitialized bytes.
-        p->decoded.payload.size = 0;
-    } else {
-        // Clamp to buffer capacity (snprintf returns "would-have-written" which can exceed the buffer).
-        const size_t msg_len = std::min(static_cast<size_t>(written), sizeof(message) - 1);
-        p->decoded.payload.size = msg_len;
-        if (msg_len > 0) {
-            memcpy(p->decoded.payload.bytes, message, msg_len);
-        }
-    }
+    p->decoded.payload.size = strlen(message);
+    memcpy(p->decoded.payload.bytes, message, p->decoded.payload.size);
 
     service->sendToMesh(p, RX_SRC_LOCAL, true);
+    delete[] message;
 }
 
 // Helper: return imprecise (truncated + centered) lat/lon as int32 using current precision
@@ -589,4 +580,4 @@ void PositionModule::handleNewPosition()
     }
 }
 
-#endif
+#endif

src/modules/SerialModule.cpp

@@ -651,7 +651,7 @@ void SerialModule::processWXSerial()
         LOG_INFO("WS8X : %i %.1fg%.1f %.1fv %.1fv %.1fC rain: %.1f, %i sum", atoi(windDir), strtof(windVel, nullptr),
                  strtof(windGust, nullptr), batVoltageF, capVoltageF, temperatureF, rain, rainSum);
     }
-    if (gotwind && !Throttle::isWithinTimespanMs(lastAveraged, averageIntervalMillis) && velCount > 0 && dirCount > 0) {
+    if (gotwind && !Throttle::isWithinTimespanMs(lastAveraged, averageIntervalMillis)) {
         // calculate averages and send to the mesh
         float velAvg = 1.0 * velSum / velCount;
 

src/modules/StatusMessageModule.cpp

@@ -29,23 +29,10 @@ int32_t StatusMessageModule::runOnce()
 ProcessMessage StatusMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
 {
     if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
-        meshtastic_StatusMessage incomingMessage = meshtastic_StatusMessage_init_zero;
-
+        meshtastic_StatusMessage incomingMessage;
         if (pb_decode_from_bytes(mp.decoded.payload.bytes, mp.decoded.payload.size, meshtastic_StatusMessage_fields,
                                  &incomingMessage)) {
-
             LOG_INFO("Received a NodeStatus message %s", incomingMessage.status);
-
-            RecentStatus entry;
-            entry.fromNodeId = mp.from;
-            entry.statusText = incomingMessage.status;
-
-            recentReceived.push_back(std::move(entry));
-
-            // Keep only last MAX_RECENT_STATUSMESSAGES
-            if (recentReceived.size() > MAX_RECENT_STATUSMESSAGES) {
-                recentReceived.erase(recentReceived.begin()); // drop oldest
-            }
         }
     }
     return ProcessMessage::CONTINUE;

src/modules/StatusMessageModule.h

@@ -2,11 +2,10 @@
 #if !MESHTASTIC_EXCLUDE_STATUS
 #include "SinglePortModule.h"
 #include "configuration.h"
-#include <string>
-#include <vector>
 
 class StatusMessageModule : public SinglePortModule, private concurrency::OSThread
 {
+
   public:
     /** Constructor
      * name is for debugging output
@@ -20,28 +19,16 @@ class StatusMessageModule : public SinglePortModule, private concurrency::OSThre
             this->setInterval(1000 * 12 * 60 * 60);
         }
         // TODO: If we have a string, set the initial delay (15 minutes maybe)
-
-        // Keep vector from reallocating as we fill up to MAX_RECENT_STATUSMESSAGES
-        recentReceived.reserve(MAX_RECENT_STATUSMESSAGES);
     }
 
     virtual int32_t runOnce() override;
 
-    struct RecentStatus {
-        uint32_t fromNodeId;    // mp.from
-        std::string statusText; // incomingMessage.status
-    };
-
-    const std::vector<RecentStatus> &getRecentReceived() const { return recentReceived; }
-
   protected:
     /** Called to handle a particular incoming message
      */
     virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
 
   private:
-    static constexpr size_t MAX_RECENT_STATUSMESSAGES = 5;
-    std::vector<RecentStatus> recentReceived;
 };
 
 extern StatusMessageModule *statusMessageModule;

src/modules/StoreForwardModule.cpp

@@ -206,7 +206,7 @@ void StoreForwardModule::historyAdd(const meshtastic_MeshPacket &mp)
     this->packetHistory[this->packetHistoryTotalCount].hop_limit = mp.hop_limit;
     this->packetHistory[this->packetHistoryTotalCount].via_mqtt = mp.via_mqtt;
     this->packetHistory[this->packetHistoryTotalCount].transport_mechanism = mp.transport_mechanism;
-    memcpy(this->packetHistory[this->packetHistoryTotalCount].payload, p.payload.bytes, p.payload.size);
+    memcpy(this->packetHistory[this->packetHistoryTotalCount].payload, p.payload.bytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 
     this->packetHistoryTotalCount++;
 }

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -66,10 +66,18 @@ extern void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const c
 #include "Sensor/MCP9808Sensor.h"
 #endif
 
+#if __has_include(<Adafruit_SHT31.h>)
+#include "Sensor/SHT31Sensor.h"
+#endif
+
 #if __has_include(<Adafruit_LPS2X.h>)
 #include "Sensor/LPS22HBSensor.h"
 #endif
 
+#if __has_include(<Adafruit_SHTC3.h>)
+#include "Sensor/SHTC3Sensor.h"
+#endif
+
 #if __has_include("RAK12035_SoilMoisture.h") && defined(RAK_4631) && RAK_4631 == 1
 #include "Sensor/RAK12035Sensor.h"
 #endif
@@ -86,8 +94,8 @@ extern void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const c
 #include "Sensor/OPT3001Sensor.h"
 #endif
 
-#if __has_include(<SHTSensor.h>)
-#include "Sensor/SHTXXSensor.h"
+#if __has_include(<Adafruit_SHT4x.h>)
+#include "Sensor/SHT4XSensor.h"
 #endif
 
 #if __has_include(<SparkFun_MLX90632_Arduino_Library.h>)
@@ -147,15 +155,6 @@ void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
     }
     LOG_INFO("Environment Telemetry adding I2C devices...");
 
-    /*
-        Uncomment the preferences below if you want to use the module
-        without having to configure it from the PythonAPI or WebUI.
-    */
-
-    // moduleConfig.telemetry.environment_measurement_enabled = 1;
-    // moduleConfig.telemetry.environment_screen_enabled = 1;
-    // moduleConfig.telemetry.environment_update_interval = 15;
-
     // order by priority of metrics/values (low top, high bottom)
 
 #if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
@@ -203,9 +202,15 @@ void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
 #if __has_include(<Adafruit_MCP9808.h>)
     addSensor<MCP9808Sensor>(i2cScanner, ScanI2C::DeviceType::MCP9808);
 #endif
+#if __has_include(<Adafruit_SHT31.h>)
+    addSensor<SHT31Sensor>(i2cScanner, ScanI2C::DeviceType::SHT31);
+#endif
 #if __has_include(<Adafruit_LPS2X.h>)
     addSensor<LPS22HBSensor>(i2cScanner, ScanI2C::DeviceType::LPS22HB);
 #endif
+#if __has_include(<Adafruit_SHTC3.h>)
+    addSensor<SHTC3Sensor>(i2cScanner, ScanI2C::DeviceType::SHTC3);
+#endif
 #if __has_include("RAK12035_SoilMoisture.h") && defined(RAK_4631) && RAK_4631 == 1
     addSensor<RAK12035Sensor>(i2cScanner, ScanI2C::DeviceType::RAK12035);
 #endif
@@ -218,9 +223,13 @@ void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
 #if __has_include(<ClosedCube_OPT3001.h>)
     addSensor<OPT3001Sensor>(i2cScanner, ScanI2C::DeviceType::OPT3001);
 #endif
+#if __has_include(<Adafruit_SHT4x.h>)
+    addSensor<SHT4XSensor>(i2cScanner, ScanI2C::DeviceType::SHT4X);
+#endif
 #if __has_include(<SparkFun_MLX90632_Arduino_Library.h>)
     addSensor<MLX90632Sensor>(i2cScanner, ScanI2C::DeviceType::MLX90632);
 #endif
+
 #if __has_include(<Adafruit_BMP3XX.h>)
     addSensor<BMP3XXSensor>(i2cScanner, ScanI2C::DeviceType::BMP_3XX);
 #endif
@@ -236,10 +245,7 @@ void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
 #if __has_include(<BH1750_WE.h>)
     addSensor<BH1750Sensor>(i2cScanner, ScanI2C::DeviceType::BH1750);
 #endif
-#if __has_include(<SHTSensor.h>)
-    // TODO Can we scan for multiple sensors connected on the same bus?
-    addSensor<SHTXXSensor>(i2cScanner, ScanI2C::DeviceType::SHTXX);
-#endif
+
 #endif
 }
 
@@ -254,6 +260,14 @@ int32_t EnvironmentTelemetryModule::runOnce()
     }
 
     uint32_t result = UINT32_MAX;
+    /*
+        Uncomment the preferences below if you want to use the module
+        without having to configure it from the PythonAPI or WebUI.
+    */
+
+    // moduleConfig.telemetry.environment_measurement_enabled = 1;
+    // moduleConfig.telemetry.environment_screen_enabled = 1;
+    // moduleConfig.telemetry.environment_update_interval = 15;
 
     if (!(moduleConfig.telemetry.environment_measurement_enabled || moduleConfig.telemetry.environment_screen_enabled ||
           ENVIRONMENTAL_TELEMETRY_MODULE_ENABLE)) {

src/modules/Telemetry/Sensor/SHT31Sensor.cpp

@@ -0,0 +1,31 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_SHT31.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "SHT31Sensor.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_SHT31.h>
+
+SHT31Sensor::SHT31Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_SHT31, "SHT31") {}
+
+bool SHT31Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
+{
+    LOG_INFO("Init sensor: %s", sensorName);
+    sht31 = Adafruit_SHT31(bus);
+    status = sht31.begin(dev->address.address);
+    initI2CSensor();
+    return status;
+}
+
+bool SHT31Sensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    measurement->variant.environment_metrics.has_temperature = true;
+    measurement->variant.environment_metrics.has_relative_humidity = true;
+    measurement->variant.environment_metrics.temperature = sht31.readTemperature();
+    measurement->variant.environment_metrics.relative_humidity = sht31.readHumidity();
+
+    return true;
+}
+
+#endif

src/modules/Telemetry/Sensor/SHT31Sensor.h

@@ -0,0 +1,20 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_SHT31.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_SHT31.h>
+
+class SHT31Sensor : public TelemetrySensor
+{
+  private:
+    Adafruit_SHT31 sht31;
+
+  public:
+    SHT31Sensor();
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+    virtual bool initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) override;
+};
+
+#endif

src/modules/Telemetry/Sensor/SHT4XSensor.cpp

@@ -0,0 +1,48 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_SHT4x.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "SHT4XSensor.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_SHT4x.h>
+
+SHT4XSensor::SHT4XSensor() : TelemetrySensor(meshtastic_TelemetrySensorType_SHT4X, "SHT4X") {}
+
+bool SHT4XSensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
+{
+    LOG_INFO("Init sensor: %s", sensorName);
+
+    uint32_t serialNumber = 0;
+
+    status = sht4x.begin(bus);
+    if (!status) {
+        return status;
+    }
+
+    serialNumber = sht4x.readSerial();
+    if (serialNumber != 0) {
+        LOG_DEBUG("serialNumber : %x", serialNumber);
+        status = 1;
+    } else {
+        LOG_DEBUG("Error trying to execute readSerial(): ");
+        status = 0;
+    }
+
+    initI2CSensor();
+    return status;
+}
+
+bool SHT4XSensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    measurement->variant.environment_metrics.has_temperature = true;
+    measurement->variant.environment_metrics.has_relative_humidity = true;
+
+    sensors_event_t humidity, temp;
+    sht4x.getEvent(&humidity, &temp);
+    measurement->variant.environment_metrics.temperature = temp.temperature;
+    measurement->variant.environment_metrics.relative_humidity = humidity.relative_humidity;
+    return true;
+}
+
+#endif

src/modules/Telemetry/Sensor/SHT4XSensor.h

@@ -0,0 +1,20 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_SHT4x.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_SHT4x.h>
+
+class SHT4XSensor : public TelemetrySensor
+{
+  private:
+    Adafruit_SHT4x sht4x = Adafruit_SHT4x();
+
+  public:
+    SHT4XSensor();
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+    virtual bool initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) override;
+};
+
+#endif

src/modules/Telemetry/Sensor/SHTC3Sensor.cpp

@@ -0,0 +1,35 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_SHTC3.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "SHTC3Sensor.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_SHTC3.h>
+
+SHTC3Sensor::SHTC3Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_SHTC3, "SHTC3") {}
+
+bool SHTC3Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
+{
+    LOG_INFO("Init sensor: %s", sensorName);
+    status = shtc3.begin(bus);
+
+    initI2CSensor();
+    return status;
+}
+
+bool SHTC3Sensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    measurement->variant.environment_metrics.has_temperature = true;
+    measurement->variant.environment_metrics.has_relative_humidity = true;
+
+    sensors_event_t humidity, temp;
+    shtc3.getEvent(&humidity, &temp);
+
+    measurement->variant.environment_metrics.temperature = temp.temperature;
+    measurement->variant.environment_metrics.relative_humidity = humidity.relative_humidity;
+
+    return true;
+}
+
+#endif

src/modules/Telemetry/Sensor/SHTC3Sensor.h

@@ -0,0 +1,20 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_SHTC3.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "TelemetrySensor.h"
+#include <Adafruit_SHTC3.h>
+
+class SHTC3Sensor : public TelemetrySensor
+{
+  private:
+    Adafruit_SHTC3 shtc3 = Adafruit_SHTC3();
+
+  public:
+    SHTC3Sensor();
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+    virtual bool initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) override;
+};
+
+#endif

src/modules/Telemetry/Sensor/SHTXXSensor.cpp

@@ -1,145 +0,0 @@
-#include "configuration.h"
-
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<SHTSensor.h>)
-
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "SHTXXSensor.h"
-#include "TelemetrySensor.h"
-#include <SHTSensor.h>
-
-SHTXXSensor::SHTXXSensor() : TelemetrySensor(meshtastic_TelemetrySensorType_SHTXX, "SHTXX") {}
-
-void SHTXXSensor::getSensorVariant(SHTSensor::SHTSensorType sensorType)
-{
-    switch (sensorType) {
-    case SHTSensor::SHTSensorType::SHT2X:
-        sensorVariant = "SHT2x";
-        break;
-
-    case SHTSensor::SHTSensorType::SHT3X:
-    case SHTSensor::SHTSensorType::SHT85:
-        sensorVariant = "SHT3x/SHT85";
-        break;
-
-    case SHTSensor::SHTSensorType::SHT3X_ALT:
-        sensorVariant = "SHT3x";
-        break;
-
-    case SHTSensor::SHTSensorType::SHTW1:
-    case SHTSensor::SHTSensorType::SHTW2:
-    case SHTSensor::SHTSensorType::SHTC1:
-    case SHTSensor::SHTSensorType::SHTC3:
-        sensorVariant = "SHTC1/SHTC3/SHTW1/SHTW2";
-        break;
-
-    case SHTSensor::SHTSensorType::SHT4X:
-        sensorVariant = "SHT4x";
-        break;
-
-    default:
-        sensorVariant = "Unknown";
-        break;
-    }
-}
-
-bool SHTXXSensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
-{
-    LOG_INFO("Init sensor: %s", sensorName);
-
-    _bus = bus;
-    _address = dev->address.address;
-
-    if (sht.init(*_bus)) {
-        LOG_INFO("%s: init(): success", sensorName);
-        getSensorVariant(sht.mSensorType);
-        LOG_INFO("%s Sensor detected: %s on 0x%x", sensorName, sensorVariant, _address);
-        status = 1;
-    } else {
-        LOG_ERROR("%s: init(): failed", sensorName);
-    }
-
-    initI2CSensor();
-    return status;
-}
-
-/**
- * Accuracy setting of measurement.
- * Not all sensors support changing the sampling accuracy (only SHT3X and SHT4X)
- * SHTAccuracy:
- * - SHT_ACCURACY_HIGH: Highest repeatability at the cost of slower measurement
- * - SHT_ACCURACY_MEDIUM: Balanced repeatability and speed of measurement
- * - SHT_ACCURACY_LOW: Fastest measurement but lowest repeatability
- */
-bool SHTXXSensor::setAccuracy(SHTSensor::SHTAccuracy newAccuracy)
-{
-    // Only SHT3X-family (including alternates) and SHT4X support changing accuracy
-    if (sht.mSensorType != SHTSensor::SHTSensorType::SHT3X && sht.mSensorType != SHTSensor::SHTSensorType::SHT3X_ALT &&
-        sht.mSensorType != SHTSensor::SHTSensorType::SHT85 && sht.mSensorType != SHTSensor::SHTSensorType::SHT4X) {
-        LOG_WARN("%s doesn't support accuracy setting", sensorVariant);
-        return false;
-    }
-    LOG_INFO("%s: setting new accuracy setting", sensorVariant);
-    accuracy = newAccuracy;
-    return sht.setAccuracy(accuracy);
-}
-
-bool SHTXXSensor::getMetrics(meshtastic_Telemetry *measurement)
-{
-    if (sht.readSample()) {
-        measurement->variant.environment_metrics.has_temperature = true;
-        measurement->variant.environment_metrics.has_relative_humidity = true;
-        measurement->variant.environment_metrics.temperature = sht.getTemperature();
-        measurement->variant.environment_metrics.relative_humidity = sht.getHumidity();
-
-        LOG_INFO("%s (%s): Got: temp:%fdegC, hum:%f%%rh", sensorName, sensorVariant,
-                 measurement->variant.environment_metrics.temperature,
-                 measurement->variant.environment_metrics.relative_humidity);
-
-        return true;
-    } else {
-        LOG_ERROR("%s (%s): read sample failed", sensorName, sensorVariant);
-        return false;
-    }
-}
-
-AdminMessageHandleResult SHTXXSensor::handleAdminMessage(const meshtastic_MeshPacket &mp, meshtastic_AdminMessage *request,
-                                                         meshtastic_AdminMessage *response)
-{
-    AdminMessageHandleResult result;
-    result = AdminMessageHandleResult::NOT_HANDLED;
-
-    switch (request->which_payload_variant) {
-    case meshtastic_AdminMessage_sensor_config_tag:
-        if (!request->sensor_config.has_shtxx_config) {
-            result = AdminMessageHandleResult::NOT_HANDLED;
-            break;
-        }
-
-        // Check for sensor accuracy setting
-        if (request->sensor_config.shtxx_config.has_set_accuracy) {
-            SHTSensor::SHTAccuracy newAccuracy;
-            if (request->sensor_config.shtxx_config.set_accuracy == 0) {
-                newAccuracy = SHTSensor::SHT_ACCURACY_LOW;
-            } else if (request->sensor_config.shtxx_config.set_accuracy == 1) {
-                newAccuracy = SHTSensor::SHT_ACCURACY_MEDIUM;
-            } else if (request->sensor_config.shtxx_config.set_accuracy == 2) {
-                newAccuracy = SHTSensor::SHT_ACCURACY_HIGH;
-            } else {
-                LOG_ERROR("%s: incorrect accuracy setting", sensorName);
-                result = AdminMessageHandleResult::HANDLED;
-                break;
-            }
-            this->setAccuracy(newAccuracy);
-        }
-
-        result = AdminMessageHandleResult::HANDLED;
-        break;
-
-    default:
-        result = AdminMessageHandleResult::NOT_HANDLED;
-    }
-
-    return result;
-}
-
-#endif

src/modules/Telemetry/Sensor/SHTXXSensor.h

@@ -1,29 +0,0 @@
-#include "configuration.h"
-
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<SHTSensor.h>)
-
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "TelemetrySensor.h"
-#include <SHTSensor.h>
-
-class SHTXXSensor : public TelemetrySensor
-{
-  private:
-    SHTSensor sht;
-    TwoWire *_bus{};
-    uint8_t _address{};
-    SHTSensor::SHTAccuracy accuracy{};
-    bool setAccuracy(SHTSensor::SHTAccuracy newAccuracy);
-
-  public:
-    SHTXXSensor();
-    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
-    virtual bool initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) override;
-    void getSensorVariant(SHTSensor::SHTSensorType);
-    const char *sensorVariant{};
-
-    AdminMessageHandleResult handleAdminMessage(const meshtastic_MeshPacket &mp, meshtastic_AdminMessage *request,
-                                                meshtastic_AdminMessage *response) override;
-};
-
-#endif

src/modules/TrafficManagementModule.h

@@ -1,434 +0,0 @@
-#pragma once
-
-#include "MeshModule.h"
-#include "concurrency/Lock.h"
-#include "concurrency/OSThread.h"
-#include "mesh/generated/meshtastic/mesh.pb.h"
-#include "mesh/generated/meshtastic/telemetry.pb.h"
-
-#if HAS_TRAFFIC_MANAGEMENT
-
-/**
- * TrafficManagementModule - Packet inspection and traffic shaping for mesh networks.
- *
- * This module provides:
- * - Position deduplication (drop redundant position broadcasts)
- * - Per-node rate limiting (throttle chatty nodes)
- * - Unknown packet filtering (drop undecoded packets from repeat offenders)
- * - NodeInfo direct response (answer queries from cache to reduce mesh chatter)
- * - Local-only telemetry/position (exhaust hop_limit for local broadcasts)
- * - Router hop preservation (maintain hop_limit for router-to-router traffic)
- *
- * Memory Optimization:
- * Uses a unified cache with cuckoo hashing for O(1) lookups and 56% memory reduction
- * compared to separate per-feature caches. Timestamps are stored as 8-bit relative
- * offsets from a rolling epoch to further reduce memory footprint.
- */
-class TrafficManagementModule : public MeshModule, private concurrency::OSThread
-{
-  public:
-    TrafficManagementModule();
-    ~TrafficManagementModule();
-
-    // Singleton — no copying or moving
-    TrafficManagementModule(const TrafficManagementModule &) = delete;
-    TrafficManagementModule &operator=(const TrafficManagementModule &) = delete;
-
-    meshtastic_TrafficManagementStats getStats() const;
-    void resetStats();
-    void recordRouterHopPreserved();
-
-    /**
-     * Check if this packet should have its hops exhausted.
-     * Called from perhapsRebroadcast() to force hop_limit = 0 regardless of
-     * router_preserve_hops or favorite node logic.
-     */
-    bool shouldExhaustHops(const meshtastic_MeshPacket &mp) const
-    {
-        return exhaustRequested && exhaustRequestedFrom == getFrom(&mp) && exhaustRequestedId == mp.id;
-    }
-
-  protected:
-    ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
-    bool wantPacket(const meshtastic_MeshPacket *p) override { return true; }
-    void alterReceived(meshtastic_MeshPacket &mp) override;
-    int32_t runOnce() override;
-    // Protected so test shims can force epoch rollover behavior.
-    void resetEpoch(uint32_t nowMs);
-
-  private:
-    // =========================================================================
-    // Unified Cache Entry (10 bytes) - Same for ALL platforms
-    // =========================================================================
-    //
-    // A single compact structure used across ESP32, NRF52, and all other platforms.
-    // Memory: 10 bytes × 2048 entries = 20KB
-    //
-    // Position Fingerprinting:
-    //   Instead of storing full coordinates (8 bytes) or a computed hash,
-    //   we store an 8-bit fingerprint derived deterministically from the
-    //   truncated lat/lon. This extracts the lower 4 significant bits from
-    //   each coordinate: fingerprint = (lat_low4 << 4) | lon_low4
-    //
-    //   Benefits over hash:
-    //   - Adjacent grid cells have sequential fingerprints (no collision)
-    //   - Two positions only collide if 16+ grid cells apart in BOTH dimensions
-    //   - Deterministic: same input always produces same output
-    //
-    // Adaptive Timestamp Resolution:
-    //   All timestamps use 8-bit values with adaptive resolution calculated
-    //   from config at startup. Resolution = max(60, min(339, interval/2)).
-    //   - Min 60 seconds ensures reasonable precision
-    //   - Max 339 seconds allows ~24 hour range (255 * 339 = 86445 sec)
-    //   - interval/2 ensures at least 2 ticks per configured interval
-    //
-    // Layout:
-    //   [0-3]   node            - NodeNum (4 bytes)
-    //   [4]     pos_fingerprint - 4 bits lat + 4 bits lon (1 byte)
-    //   [5]     rate_count      - Packets in current window (1 byte)
-    //   [6]     unknown_count   - Unknown packets count (1 byte)
-    //   [7]     pos_time        - Position timestamp (1 byte, adaptive resolution)
-    //   [8]     rate_time       - Rate window start (1 byte, adaptive resolution)
-    //   [9]     unknown_time    - Unknown tracking start (1 byte, adaptive resolution)
-    //
-    struct __attribute__((packed)) UnifiedCacheEntry {
-        NodeNum node;            // 4 bytes - Node identifier (0 = empty slot)
-        uint8_t pos_fingerprint; // 1 byte  - Lower 4 bits of lat + lon
-        uint8_t rate_count;      // 1 byte  - Packet count (saturates at 255)
-        uint8_t unknown_count;   // 1 byte  - Unknown packet count (saturates at 255)
-        uint8_t pos_time;        // 1 byte  - Position timestamp (adaptive resolution)
-        uint8_t rate_time;       // 1 byte  - Rate window start (adaptive resolution)
-        uint8_t unknown_time;    // 1 byte  - Unknown tracking start (adaptive resolution)
-    };
-    static_assert(sizeof(UnifiedCacheEntry) == 10, "UnifiedCacheEntry should be 10 bytes");
-
-    // =========================================================================
-    // Cuckoo Hash Table Implementation
-    // =========================================================================
-    //
-    // Cuckoo hashing provides O(1) worst-case lookup time using two hash functions.
-    // Each key can be in one of two possible locations (h1 or h2). On collision,
-    // the existing entry is "kicked" to its alternate location.
-    //
-    // Benefits over linear scan:
-    // - O(1) lookup vs O(n) - critical at packet processing rates
-    // - O(1) insertion (amortized) with simple eviction on cycles
-    // - ~95% load factor achievable
-    //
-    // Cache size rounds to power-of-2 for fast modulo via bitmask.
-    // TRAFFIC_MANAGEMENT_CACHE_SIZE=2000 → cacheSize()=2048
-    //
-    static constexpr uint16_t cacheSize();
-    static constexpr uint16_t cacheMask();
-
-    // Hash functions for cuckoo hashing
-    inline uint16_t cuckooHash1(NodeNum node) const { return node & cacheMask(); }
-    inline uint16_t cuckooHash2(NodeNum node) const { return ((node * 2654435769u) >> (32 - cuckooHashBits())) & cacheMask(); }
-    static constexpr uint8_t cuckooHashBits();
-
-    // NodeInfo cache configuration (PSRAM path):
-    // - Payload lives in PSRAM
-    // - DRAM keeps packed 12-bit tags with 4-way bucketed cuckoo hashing
-    //   (Fan et al., CoNEXT 2014). Tag value 0 is reserved as "empty".
-    static constexpr uint16_t kNodeInfoIndexMetadataBudgetBytes = 3072; // 3KB DRAM tag store
-    static constexpr uint8_t kNodeInfoTargetOccupancyPercent = 95;
-    static constexpr uint8_t kNodeInfoBucketSize = 4;
-    static constexpr uint8_t kNodeInfoTagBits = 12;
-    static constexpr uint16_t kNodeInfoTagMask = static_cast<uint16_t>((1u << kNodeInfoTagBits) - 1u);
-    static constexpr uint16_t kNodeInfoIndexSlotsRaw =
-        static_cast<uint16_t>((kNodeInfoIndexMetadataBudgetBytes * 8u) / kNodeInfoTagBits);
-    static constexpr uint16_t kNodeInfoIndexSlots =
-        static_cast<uint16_t>(kNodeInfoIndexSlotsRaw - (kNodeInfoIndexSlotsRaw % kNodeInfoBucketSize));
-    static constexpr uint16_t kNodeInfoTargetEntries =
-        static_cast<uint16_t>((kNodeInfoIndexSlots * kNodeInfoTargetOccupancyPercent) / 100u);
-    static_assert((kNodeInfoIndexSlots % kNodeInfoBucketSize) == 0, "NodeInfo slot count must align to bucket size");
-    static_assert(kNodeInfoTargetEntries < (1u << kNodeInfoTagBits), "NodeInfo tag bits must encode payload index");
-
-    static constexpr uint16_t nodeInfoTargetEntries();
-    static constexpr uint16_t nodeInfoIndexMetadataBudgetBytes();
-    static constexpr uint8_t nodeInfoTargetOccupancyPercent();
-    static constexpr uint8_t nodeInfoBucketSize();
-    static constexpr uint8_t nodeInfoTagBits();
-    static constexpr uint16_t nodeInfoTagMask();
-    static constexpr uint16_t nodeInfoIndexSlots();
-    static constexpr uint16_t nodeInfoBucketCount();
-    static constexpr uint16_t nodeInfoBucketMask();
-    static constexpr uint8_t nodeInfoBucketHashBits();
-    inline uint16_t nodeInfoHash1(NodeNum node) const { return node & nodeInfoBucketMask(); }
-    inline uint16_t nodeInfoHash2(NodeNum node) const
-    {
-        return ((node * 2246822519u) >> (32 - nodeInfoBucketHashBits())) & nodeInfoBucketMask();
-    }
-
-    // =========================================================================
-    // Adaptive Timestamp Resolution
-    // =========================================================================
-    //
-    // All timestamps use 8-bit values with adaptive resolution calculated from
-    // config at startup. This allows ~24 hour range while maintaining precision.
-    //
-    // Resolution formula: max(60, min(339, interval/2))
-    //   - 60 sec minimum ensures reasonable precision
-    //   - 339 sec maximum allows 24 hour range (255 * 339 ≈ 86400 sec)
-    //   - interval/2 ensures at least 2 ticks per configured interval
-    //
-    // Since config changes require reboot, resolution is calculated once.
-    //
-    uint32_t cacheEpochMs = 0;
-    uint16_t posTimeResolution = 60;     // Seconds per tick for position
-    uint16_t rateTimeResolution = 60;    // Seconds per tick for rate limiting
-    uint16_t unknownTimeResolution = 60; // Seconds per tick for unknown tracking
-
-    // Calculate resolution from configured interval (called once at startup)
-    static uint16_t calcTimeResolution(uint32_t intervalSecs)
-    {
-        // Resolution = interval/2 to ensure at least 2 ticks per interval
-        // Clamped to [60, 339] for min precision and max 24h range
-        uint32_t res = (intervalSecs > 0) ? (intervalSecs / 2) : 60;
-        if (res < 60)
-            res = 60;
-        if (res > 339)
-            res = 339;
-        return static_cast<uint16_t>(res);
-    }
-
-    // Convert to/from 8-bit relative timestamps with given resolution
-    uint8_t toRelativeTime(uint32_t nowMs, uint16_t resolutionSecs) const
-    {
-        uint32_t ticks = (nowMs - cacheEpochMs) / (resolutionSecs * 1000UL);
-        return (ticks > UINT8_MAX) ? UINT8_MAX : static_cast<uint8_t>(ticks);
-    }
-    uint32_t fromRelativeTime(uint8_t ticks, uint16_t resolutionSecs) const
-    {
-        return cacheEpochMs + (static_cast<uint32_t>(ticks) * resolutionSecs * 1000UL);
-    }
-
-    // Convenience wrappers for each timestamp type
-    uint8_t toRelativePosTime(uint32_t nowMs) const { return toRelativeTime(nowMs, posTimeResolution); }
-    uint32_t fromRelativePosTime(uint8_t t) const { return fromRelativeTime(t, posTimeResolution); }
-
-    uint8_t toRelativeRateTime(uint32_t nowMs) const { return toRelativeTime(nowMs, rateTimeResolution); }
-    uint32_t fromRelativeRateTime(uint8_t t) const { return fromRelativeTime(t, rateTimeResolution); }
-
-    uint8_t toRelativeUnknownTime(uint32_t nowMs) const { return toRelativeTime(nowMs, unknownTimeResolution); }
-    uint32_t fromRelativeUnknownTime(uint8_t t) const { return fromRelativeTime(t, unknownTimeResolution); }
-
-    // Epoch reset when any timestamp approaches overflow
-    // With max resolution of 339 sec, 200 ticks = ~19 hours (safe margin for 24h max)
-    bool needsEpochReset(uint32_t nowMs) const
-    {
-        uint16_t maxRes = posTimeResolution;
-        if (rateTimeResolution > maxRes)
-            maxRes = rateTimeResolution;
-        if (unknownTimeResolution > maxRes)
-            maxRes = unknownTimeResolution;
-        return (nowMs - cacheEpochMs) > (200UL * maxRes * 1000UL);
-    }
-    // =========================================================================
-    // Position Fingerprint
-    // =========================================================================
-    //
-    // Computes 8-bit fingerprint from truncated lat/lon coordinates.
-    // Extracts lower 4 significant bits from each coordinate.
-    //
-    // fingerprint = (lat_low4 << 4) | lon_low4
-    //
-    // Unlike a hash, adjacent grid cells have sequential fingerprints,
-    // so nearby positions never collide. Collisions only occur for
-    // positions 16+ grid cells apart in both dimensions.
-    //
-    // Guards: If precision < 4 bits, uses min(precision, 4) bits.
-    //
-    static uint8_t computePositionFingerprint(int32_t lat_truncated, int32_t lon_truncated, uint8_t precision);
-
-    // =========================================================================
-    // Cache Storage
-    // =========================================================================
-
-    mutable concurrency::Lock cacheLock; // Protects all cache access
-    UnifiedCacheEntry *cache = nullptr;  // Cuckoo hash table (unified for all platforms)
-    bool cacheFromPsram = false;         // Tracks allocator for correct deallocation
-
-    struct NodeInfoPayloadEntry {
-        // Node identifier associated with this payload slot.
-        // 0 means the slot is currently unused.
-        NodeNum node;
-
-        // Cached NODEINFO_APP payload body. This is separate from NodeDB and is only
-        // used by the PSRAM-backed direct-response path in this module.
-        meshtastic_User user;
-
-        // Extra response metadata captured from the latest observed NODEINFO_APP
-        // packet for this node. shouldRespondToNodeInfo() uses this metadata when
-        // building spoofed replies for requesting clients.
-
-        // Last local uptime tick (millis) when this entry was refreshed.
-        uint32_t lastObservedMs;
-
-        // Last RTC/packet timestamp (seconds) observed for this NodeInfo frame.
-        // If unavailable in packet, remains 0.
-        uint32_t lastObservedRxTime;
-
-        // Channel where we most recently heard this node's NodeInfo.
-        uint8_t sourceChannel;
-
-        // Cached decoded bitfield metadata from the source packet.
-        // We preserve non-OK_TO_MQTT bits in direct replies when available.
-        bool hasDecodedBitfield;
-        uint8_t decodedBitfield;
-    };
-
-    NodeInfoPayloadEntry *nodeInfoPayload = nullptr; // NodeInfo payloads in PSRAM
-    bool nodeInfoPayloadFromPsram = false;           // Tracks allocator for correct deallocation
-    uint8_t *nodeInfoIndex = nullptr;                // Packed 12-bit NodeInfo tags in DRAM
-    uint16_t nodeInfoAllocHint = 0;
-    uint16_t nodeInfoEvictCursor = 0;
-
-    meshtastic_TrafficManagementStats stats;
-
-    // Flag set during alterReceived() when packet should be exhausted.
-    // Checked by perhapsRebroadcast() to force hop_limit = 0 only for the
-    // matching packet key (from + id). Reset at start of handleReceived().
-    bool exhaustRequested = false;
-    NodeNum exhaustRequestedFrom = 0;
-    PacketId exhaustRequestedId = 0;
-
-    // =========================================================================
-    // Cache Operations
-    // =========================================================================
-
-    // Find or create entry for node using cuckoo hashing
-    // Returns nullptr if cache is full and eviction fails
-    UnifiedCacheEntry *findOrCreateEntry(NodeNum node, bool *isNew);
-
-    // Find existing entry (no creation)
-    UnifiedCacheEntry *findEntry(NodeNum node);
-
-    // NodeInfo cache operations (bucketed cuckoo index + PSRAM payloads)
-    const NodeInfoPayloadEntry *findNodeInfoEntry(NodeNum node) const;
-    NodeInfoPayloadEntry *findOrCreateNodeInfoEntry(NodeNum node, bool *usedEmptySlot);
-    uint16_t findNodeInfoPayloadIndex(NodeNum node) const;
-    bool removeNodeInfoIndexEntry(NodeNum node, uint16_t payloadIndex);
-    uint16_t allocateNodeInfoPayloadSlot();
-    uint16_t evictNodeInfoPayloadSlot();
-    bool tryInsertNodeInfoEntryInBucket(uint16_t bucket, uint16_t tag);
-    uint16_t encodeNodeInfoTag(uint16_t payloadIndex) const;
-    uint16_t decodeNodeInfoPayloadIndex(uint16_t tag) const;
-    uint16_t getNodeInfoTag(uint16_t slot) const;
-    void setNodeInfoTag(uint16_t slot, uint16_t tag);
-    uint16_t countNodeInfoEntriesLocked() const;
-    void cacheNodeInfoPacket(const meshtastic_MeshPacket &mp);
-
-    // =========================================================================
-    // Traffic Management Logic
-    // =========================================================================
-
-    bool shouldDropPosition(const meshtastic_MeshPacket *p, const meshtastic_Position *pos, uint32_t nowMs);
-    bool shouldRespondToNodeInfo(const meshtastic_MeshPacket *p, bool sendResponse);
-    bool isMinHopsFromRequestor(const meshtastic_MeshPacket *p) const;
-    bool isRateLimited(NodeNum from, uint32_t nowMs);
-    bool shouldDropUnknown(const meshtastic_MeshPacket *p, uint32_t nowMs);
-
-    void logAction(const char *action, const meshtastic_MeshPacket *p, const char *reason) const;
-    void incrementStat(uint32_t *field);
-};
-
-// =========================================================================
-// Compile-time Cache Size Calculations
-// =========================================================================
-//
-// Round TRAFFIC_MANAGEMENT_CACHE_SIZE up to next power of 2 for efficient
-// cuckoo hash indexing (allows bitmask instead of modulo).
-//
-// These use C++11-compatible constexpr (single return statement).
-//
-
-namespace detail
-{
-// Helper: round up to next power of 2 using bit manipulation
-constexpr uint16_t nextPow2(uint16_t n)
-{
-    return n == 0 ? 0 : (((n - 1) | ((n - 1) >> 1) | ((n - 1) >> 2) | ((n - 1) >> 4) | ((n - 1) >> 8)) + 1);
-}
-
-// Helper: floor(log2(n)) for n >= 0, C++11-compatible constexpr.
-constexpr uint8_t log2Floor(uint16_t n)
-{
-    return n <= 1 ? 0 : static_cast<uint8_t>(1 + log2Floor(static_cast<uint16_t>(n >> 1)));
-}
-
-// Helper: ceil(log2(n)) for n >= 1, C++11-compatible constexpr.
-constexpr uint8_t log2Ceil(uint16_t n)
-{
-    return n <= 1 ? 0 : static_cast<uint8_t>(1 + log2Floor(static_cast<uint16_t>(n - 1)));
-}
-} // namespace detail
-
-constexpr uint16_t TrafficManagementModule::cacheSize()
-{
-    return detail::nextPow2(TRAFFIC_MANAGEMENT_CACHE_SIZE);
-}
-
-constexpr uint16_t TrafficManagementModule::cacheMask()
-{
-    return cacheSize() > 0 ? cacheSize() - 1 : 0;
-}
-
-constexpr uint8_t TrafficManagementModule::cuckooHashBits()
-{
-    return detail::log2Floor(cacheSize());
-}
-
-constexpr uint16_t TrafficManagementModule::nodeInfoTargetEntries()
-{
-    return kNodeInfoTargetEntries;
-}
-
-constexpr uint16_t TrafficManagementModule::nodeInfoIndexMetadataBudgetBytes()
-{
-    return kNodeInfoIndexMetadataBudgetBytes;
-}
-
-constexpr uint8_t TrafficManagementModule::nodeInfoTargetOccupancyPercent()
-{
-    return kNodeInfoTargetOccupancyPercent;
-}
-
-constexpr uint8_t TrafficManagementModule::nodeInfoBucketSize()
-{
-    return kNodeInfoBucketSize;
-}
-
-constexpr uint8_t TrafficManagementModule::nodeInfoTagBits()
-{
-    return kNodeInfoTagBits;
-}
-
-constexpr uint16_t TrafficManagementModule::nodeInfoTagMask()
-{
-    return kNodeInfoTagMask;
-}
-
-constexpr uint16_t TrafficManagementModule::nodeInfoIndexSlots()
-{
-    return kNodeInfoIndexSlots;
-}
-
-constexpr uint16_t TrafficManagementModule::nodeInfoBucketCount()
-{
-    return static_cast<uint16_t>(nodeInfoIndexSlots() / nodeInfoBucketSize());
-}
-
-constexpr uint16_t TrafficManagementModule::nodeInfoBucketMask()
-{
-    return nodeInfoBucketCount() > 0 ? nodeInfoBucketCount() - 1 : 0;
-}
-
-constexpr uint8_t TrafficManagementModule::nodeInfoBucketHashBits()
-{
-    return detail::log2Floor(nodeInfoBucketCount());
-}
-
-extern TrafficManagementModule *trafficManagementModule;
-
-#endif

src/modules/WaypointModule.cpp

@@ -15,6 +15,15 @@
 
 WaypointModule *waypointModule;
 
+static inline float degToRad(float deg)
+{
+    return deg * PI / 180.0f;
+}
+static inline float radToDeg(float rad)
+{
+    return rad * 180.0f / PI;
+}
+
 ProcessMessage WaypointModule::handleReceived(const meshtastic_MeshPacket &mp)
 {
 #if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
@@ -82,7 +91,9 @@ void WaypointModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state,
 
     // === Header ===
     graphics::drawCommonHeader(display, x, y, titleStr);
-    const int *textPos = graphics::getTextPositions(display);
+
+    const int w = display->getWidth();
+    const int h = display->getHeight();
 
     // Decode the waypoint
     const meshtastic_MeshPacket &mp = devicestate.rx_waypoint;
@@ -97,118 +108,71 @@ void WaypointModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state,
     getTimeAgoStr(sinceReceived(&mp), lastStr, sizeof(lastStr));
 
     // Will contain distance information, passed as a field to drawColumns
-    char distStr[20] = "";
+    char distStr[20];
 
     // Get our node, to use our own position
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
 
-    // Match compass sizing/placement to favorite node screen logic.
-    const int w = display->getWidth();
-    int16_t compassRadius = 8;
-    int16_t compassX = x + w - compassRadius - 8;
-    int16_t compassY = y + display->getHeight() / 2;
+    // Dimensions / co-ordinates for the compass/circle
+    const uint16_t compassDiam = graphics::CompassRenderer::getCompassDiam(w, h);
+    const int16_t compassX = x + w - (compassDiam / 2) - 5;
+    const int16_t compassY = (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT)
+                                 ? y + h / 2
+                                 : y + FONT_HEIGHT_SMALL + (h - FONT_HEIGHT_SMALL) / 2;
 
-    if (SCREEN_WIDTH > SCREEN_HEIGHT) {
-        const int16_t topY = textPos[1];
-        const int16_t bottomY = SCREEN_HEIGHT - (FONT_HEIGHT_SMALL - 1);
-        const int16_t usableHeight = bottomY - topY - 5;
-        compassRadius = usableHeight / 2;
-        if (compassRadius < 8)
-            compassRadius = 8;
-        compassX = x + SCREEN_WIDTH - compassRadius - 8;
-        compassY = topY + (usableHeight / 2) + ((FONT_HEIGHT_SMALL - 1) / 2) + 2;
-    } else {
-        // Waypoint content uses rows 1..4, so place the compass below that block.
-        const int yBelowContent = textPos[4] + FONT_HEIGHT_SMALL + 2;
-        const int margin = 4;
-#if defined(USE_EINK)
-        const int iconSize = (graphics::currentResolution == graphics::ScreenResolution::High) ? 16 : 8;
-        const int navBarHeight = iconSize + 6;
-#else
-        const int navBarHeight = 0;
-#endif
-        const int availableHeight = SCREEN_HEIGHT - yBelowContent - navBarHeight - margin;
-        if (availableHeight > 0) {
-            compassRadius = availableHeight / 2;
-            if (compassRadius < 8)
-                compassRadius = 8;
-            if (compassRadius * 2 > SCREEN_WIDTH - 16)
-                compassRadius = (SCREEN_WIDTH - 16) / 2;
-            if (compassRadius < 8)
-                compassRadius = 8;
-            compassX = x + SCREEN_WIDTH / 2;
-            compassY = yBelowContent + availableHeight / 2;
-        }
-    }
-    const uint16_t compassDiam = compassRadius * 2;
-
-    const bool hasOwnPositionFix = (ourNode && nodeDB->hasValidPosition(ourNode));
-    const char *statusLine1 = nullptr;
-    const char *statusLine2 = nullptr;
-
-    // Distance only needs our own position fix; compass/bearing additionally needs heading.
-    if (hasOwnPositionFix) {
+    // If our node has a position:
+    if (ourNode && (nodeDB->hasValidPosition(ourNode) || screen->hasHeading())) {
         const meshtastic_PositionLite &op = ourNode->position;
-        const float d =
-            GeoCoord::latLongToMeter(DegD(wp.latitude_i), DegD(wp.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
+        float myHeading;
+        if (uiconfig.compass_mode == meshtastic_CompassMode_FREEZE_HEADING) {
+            myHeading = 0;
+        } else {
+            if (screen->hasHeading())
+                myHeading = degToRad(screen->getHeading());
+            else
+                myHeading = screen->estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i));
+        }
+        graphics::CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, (compassDiam / 2));
 
-        // Always show distance once we have an own-position fix, even without heading.
+        // Compass bearing to waypoint
+        float bearingToOther =
+            GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(wp.latitude_i), DegD(wp.longitude_i));
+        // If the top of the compass is a static north then bearingToOther can be drawn on the compass directly
+        // If the top of the compass is not a static north we need adjust bearingToOther based on heading
+        if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING)
+            bearingToOther -= myHeading;
+        graphics::CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, bearingToOther);
+
+        float bearingToOtherDegrees = (bearingToOther < 0) ? bearingToOther + 2 * PI : bearingToOther;
+        bearingToOtherDegrees = radToDeg(bearingToOtherDegrees);
+
+        // Distance to Waypoint
+        float d = GeoCoord::latLongToMeter(DegD(wp.latitude_i), DegD(wp.longitude_i), DegD(op.latitude_i), DegD(op.longitude_i));
         if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
             float feet = d * METERS_TO_FEET;
-            snprintf(distStr, sizeof(distStr), feet < (2 * MILES_TO_FEET) ? "%.0fft" : "%.1fmi",
-                     feet < (2 * MILES_TO_FEET) ? feet : feet / MILES_TO_FEET);
+            snprintf(distStr, sizeof(distStr), feet < (2 * MILES_TO_FEET) ? "%.0fft   %.0f°" : "%.1fmi   %.0f°",
+                     feet < (2 * MILES_TO_FEET) ? feet : feet / MILES_TO_FEET, bearingToOtherDegrees);
         } else {
-            snprintf(distStr, sizeof(distStr), d < 2000 ? "%.0fm" : "%.1fkm", d < 2000 ? d : d / 1000);
+            snprintf(distStr, sizeof(distStr), d < 2000 ? "%.0fm   %.0f°" : "%.1fkm   %.0f°", d < 2000 ? d : d / 1000,
+                     bearingToOtherDegrees);
         }
-
-        float myHeading = 0.0f;
-        const bool hasHeading =
-            graphics::CompassRenderer::getHeadingRadians(DegD(op.latitude_i), DegD(op.longitude_i), myHeading);
-        if (hasHeading) {
-            // Draw compass circle
-            display->drawCircle(compassX, compassY, compassRadius);
-            graphics::CompassRenderer::drawCompassNorth(display, compassX, compassY, myHeading, compassRadius);
-
-            // Compass bearing to waypoint
-            float bearingToOther =
-                GeoCoord::bearing(DegD(op.latitude_i), DegD(op.longitude_i), DegD(wp.latitude_i), DegD(wp.longitude_i));
-            bearingToOther = graphics::CompassRenderer::adjustBearingForCompassMode(bearingToOther, myHeading);
-            graphics::CompassRenderer::drawNodeHeading(display, compassX, compassY, compassDiam, bearingToOther);
-
-            const float bearingToOtherDegrees = graphics::CompassRenderer::radiansToDegrees360(bearingToOther);
-
-            // Distance to waypoint with relative bearing when heading is available.
-            if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
-                float feet = d * METERS_TO_FEET;
-                snprintf(distStr, sizeof(distStr), feet < (2 * MILES_TO_FEET) ? "%.0fft   %.0f°" : "%.1fmi   %.0f°",
-                         feet < (2 * MILES_TO_FEET) ? feet : feet / MILES_TO_FEET, bearingToOtherDegrees);
-            } else {
-                snprintf(distStr, sizeof(distStr), d < 2000 ? "%.0fm   %.0f°" : "%.1fkm   %.0f°", d < 2000 ? d : d / 1000,
-                         bearingToOtherDegrees);
-            }
-
-        } else {
-            statusLine1 = "No";
-            statusLine2 = "Heading";
-        }
-    } else {
-        // No own fix yet, so compass/bearing data would be misleading.
-        statusLine1 = "No";
-        statusLine2 = "Fix";
     }
 
-    if (statusLine1) {
-        display->drawCircle(compassX, compassY, compassRadius);
-        display->setTextAlignment(TEXT_ALIGN_CENTER);
-        display->drawString(compassX, compassY - FONT_HEIGHT_SMALL, statusLine1);
-        display->drawString(compassX, compassY, statusLine2);
+    else {
+        display->drawString(compassX - FONT_HEIGHT_SMALL / 4, compassY - FONT_HEIGHT_SMALL / 2, "?");
+
+        // ? in the distance field
+        snprintf(distStr, sizeof(distStr), "? %s ?°",
+                 (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) ? "mi" : "km");
     }
 
+    // Draw compass circle
+    display->drawCircle(compassX, compassY, compassDiam / 2);
+
     display->setTextAlignment(TEXT_ALIGN_LEFT); // Something above me changes to a different alignment, forcing a fix here!
-    display->drawString(0, textPos[line++], lastStr);
-    display->drawString(0, textPos[line++], wp.name);
-    display->drawString(0, textPos[line++], wp.description);
-    if (distStr[0])
-        display->drawString(0, textPos[line++], distStr);
+    display->drawString(0, graphics::getTextPositions(display)[line++], lastStr);
+    display->drawString(0, graphics::getTextPositions(display)[line++], wp.name);
+    display->drawString(0, graphics::getTextPositions(display)[line++], wp.description);
+    display->drawString(0, graphics::getTextPositions(display)[line++], distStr);
 }
 #endif

src/modules/esp32/AudioModule.cpp

@@ -100,7 +100,7 @@ AudioModule::AudioModule() : SinglePortModule("Audio", meshtastic_PortNum_AUDIO_
     // moduleConfig.audio.i2s_sck = 14;
     // moduleConfig.audio.ptt_pin = 39;
 
-    if ((moduleConfig.audio.codec2_enabled) && (myRegion->profile->audioPermitted)) {
+    if ((moduleConfig.audio.codec2_enabled) && (myRegion->audioPermitted)) {
         LOG_INFO("Set up codec2 in mode %u", (moduleConfig.audio.bitrate ? moduleConfig.audio.bitrate : AUDIO_MODULE_MODE) - 1);
         codec2 = codec2_create((moduleConfig.audio.bitrate ? moduleConfig.audio.bitrate : AUDIO_MODULE_MODE) - 1);
         memcpy(tx_header.magic, c2_magic, sizeof(c2_magic));
@@ -143,7 +143,7 @@ void AudioModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int
 
 int32_t AudioModule::runOnce()
 {
-    if ((moduleConfig.audio.codec2_enabled) && (myRegion->profile->audioPermitted)) {
+    if ((moduleConfig.audio.codec2_enabled) && (myRegion->audioPermitted)) {
         esp_err_t res;
         if (firstTime) {
             // Set up I2S Processor configuration. This will produce 16bit samples at 8 kHz instead of 12 from the ADC
@@ -270,7 +270,7 @@ void AudioModule::sendPayload(NodeNum dest, bool wantReplies)
 
 ProcessMessage AudioModule::handleReceived(const meshtastic_MeshPacket &mp)
 {
-    if ((moduleConfig.audio.codec2_enabled) && (myRegion->profile->audioPermitted)) {
+    if ((moduleConfig.audio.codec2_enabled) && (myRegion->audioPermitted)) {
         auto &p = mp.decoded;
         if (!isFromUs(&mp)) {
             memcpy(rx_encode_frame, p.payload.bytes, p.payload.size);

src/motion/BMM150Sensor.cpp

@@ -7,6 +7,9 @@
 extern graphics::Screen *screen;
 #endif
 
+// Flag when an interrupt has been detected
+volatile static bool BMM150_IRQ = false;
+
 BMM150Sensor::BMM150Sensor(ScanI2C::FoundDevice foundDevice) : MotionSensor::MotionSensor(foundDevice) {}
 
 bool BMM150Sensor::init()
@@ -20,7 +23,24 @@ int32_t BMM150Sensor::runOnce()
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
     float heading = sensor->getCompassDegree();
-    heading = applyCompassOrientation(heading);
+
+    switch (config.display.compass_orientation) {
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
+        heading += 90;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
+        heading += 180;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
+        heading += 270;
+        break;
+    }
     if (screen)
         screen->setHeading(heading);
 #endif
@@ -70,4 +90,4 @@ bool BMM150Singleton::init(ScanI2C::FoundDevice device)
     return true;
 }
 
-#endif
+#endif

src/motion/BMX160Sensor.cpp

@@ -16,7 +16,6 @@ bool BMX160Sensor::init()
     if (sensor.begin()) {
         // set output data rate
         sensor.ODR_Config(BMX160_ACCEL_ODR_100HZ, BMX160_GYRO_ODR_100HZ);
-        loadMagnetometerCalibration(compassCalibrationFileName, highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
         LOG_DEBUG("BMX160 init ok");
         return true;
     }
@@ -34,12 +33,42 @@ int32_t BMX160Sensor::runOnce()
     sensor.getAllData(&magAccel, NULL, &gAccel);
 
     if (doCalibration) {
-        beginCalibrationDisplay(showingScreen);
-        updateCalibrationExtrema(magAccel.x, magAccel.y, magAccel.z, highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
-        finishCalibrationIfExpired(showingScreen, compassCalibrationFileName, highestX, lowestX, highestY, lowestY, highestZ,
-                                   lowestZ);
+
+        if (!showingScreen) {
+            powerFSM.trigger(EVENT_PRESS); // keep screen alive during calibration
+            showingScreen = true;
+            if (screen)
+                screen->startAlert((FrameCallback)drawFrameCalibration);
+        }
+
+        if (magAccel.x > highestX)
+            highestX = magAccel.x;
+        if (magAccel.x < lowestX)
+            lowestX = magAccel.x;
+        if (magAccel.y > highestY)
+            highestY = magAccel.y;
+        if (magAccel.y < lowestY)
+            lowestY = magAccel.y;
+        if (magAccel.z > highestZ)
+            highestZ = magAccel.z;
+        if (magAccel.z < lowestZ)
+            lowestZ = magAccel.z;
+
+        uint32_t now = millis();
+        if (now > endCalibrationAt) {
+            doCalibration = false;
+            endCalibrationAt = 0;
+            showingScreen = false;
+            if (screen)
+                screen->endAlert();
+        }
+
+        // LOG_DEBUG("BMX160 min_x: %.4f, max_X: %.4f, min_Y: %.4f, max_Y: %.4f, min_Z: %.4f, max_Z: %.4f", lowestX, highestX,
+        // lowestY, highestY, lowestZ, highestZ);
     }
 
+    int highestRealX = highestX - (highestX + lowestX) / 2;
+
     magAccel.x -= (highestX + lowestX) / 2;
     magAccel.y -= (highestY + lowestY) / 2;
     magAccel.z -= (highestZ + lowestZ) / 2;
@@ -59,7 +88,23 @@ int32_t BMX160Sensor::runOnce()
 
     float heading = FusionCompassCalculateHeading(FusionConventionNed, ga, ma);
 
-    heading = applyCompassOrientation(heading);
+    switch (config.display.compass_orientation) {
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
+        heading += 90;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
+        heading += 180;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
+        heading += 270;
+        break;
+    }
     if (screen)
         screen->setHeading(heading);
 #endif
@@ -74,8 +119,15 @@ void BMX160Sensor::calibrate(uint16_t forSeconds)
     sBmx160SensorData_t gAccel;
     LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
     sensor.getAllData(&magAccel, NULL, &gAccel);
-    seedCalibrationExtrema(magAccel.x, magAccel.y, magAccel.z, highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
-    startCalibrationWindow(forSeconds);
+    highestX = magAccel.x, lowestX = magAccel.x;
+    highestY = magAccel.y, lowestY = magAccel.y;
+    highestZ = magAccel.z, lowestZ = magAccel.z;
+
+    doCalibration = true;
+    uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
+    endCalibrationAt = millis() + calibrateFor;
+    if (screen)
+        screen->setEndCalibration(endCalibrationAt);
 #endif
 }
 

src/motion/BMX160Sensor.h

@@ -17,7 +17,6 @@ class BMX160Sensor : public MotionSensor
   private:
     RAK_BMX160 sensor;
     bool showingScreen = false;
-    static constexpr const char *compassCalibrationFileName = "/prefs/compass_bmx160.dat";
     float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
 
   public:
@@ -40,4 +39,4 @@ class BMX160Sensor : public MotionSensor
 
 #endif
 
-#endif
+#endif

src/motion/ICM20948Sensor.cpp

@@ -26,11 +26,7 @@ bool ICM20948Sensor::init()
         return false;
 
     // Enable simple Wake on Motion
-    bool wakeOnMotionOk = sensor->setWakeOnMotion();
-    if (wakeOnMotionOk) {
-        loadMagnetometerCalibration(compassCalibrationFileName, highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
-    }
-    return wakeOnMotionOk;
+    return sensor->setWakeOnMotion();
 }
 
 #ifdef ICM_20948_INT_PIN
@@ -51,8 +47,7 @@ int32_t ICM20948Sensor::runOnce()
 int32_t ICM20948Sensor::runOnce()
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
-    if (screen && !doCalibration && !screen->isScreenOn() && !config.display.wake_on_tap_or_motion &&
-        !config.device.double_tap_as_button_press) {
+    if (screen && !screen->isScreenOn() && !config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
         if (!isAsleep) {
             LOG_DEBUG("sleeping IMU");
             sensor->sleep(true);
@@ -74,10 +69,38 @@ int32_t ICM20948Sensor::runOnce()
     }
 
     if (doCalibration) {
-        beginCalibrationDisplay(showingScreen);
-        updateCalibrationExtrema(magX, magY, magZ, highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
-        finishCalibrationIfExpired(showingScreen, compassCalibrationFileName, highestX, lowestX, highestY, lowestY, highestZ,
-                                   lowestZ);
+
+        if (!showingScreen) {
+            powerFSM.trigger(EVENT_PRESS); // keep screen alive during calibration
+            showingScreen = true;
+            if (screen)
+                screen->startAlert((FrameCallback)drawFrameCalibration);
+        }
+
+        if (magX > highestX)
+            highestX = magX;
+        if (magX < lowestX)
+            lowestX = magX;
+        if (magY > highestY)
+            highestY = magY;
+        if (magY < lowestY)
+            lowestY = magY;
+        if (magZ > highestZ)
+            highestZ = magZ;
+        if (magZ < lowestZ)
+            lowestZ = magZ;
+
+        uint32_t now = millis();
+        if (now > endCalibrationAt) {
+            doCalibration = false;
+            endCalibrationAt = 0;
+            showingScreen = false;
+            if (screen)
+                screen->endAlert();
+        }
+
+        // LOG_DEBUG("ICM20948 min_x: %.4f, max_X: %.4f, min_Y: %.4f, max_Y: %.4f, min_Z: %.4f, max_Z: %.4f", lowestX, highestX,
+        //           lowestY, highestY, lowestZ, highestZ);
     }
 
     magX -= (highestX + lowestX) / 2;
@@ -99,7 +122,23 @@ int32_t ICM20948Sensor::runOnce()
 
     float heading = FusionCompassCalculateHeading(FusionConventionNed, ga, ma);
 
-    heading = applyCompassOrientation(heading);
+    switch (config.display.compass_orientation) {
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
+        heading += 90;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
+        heading += 180;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
+        heading += 270;
+        break;
+    }
     if (screen)
         screen->setHeading(heading);
 #endif
@@ -130,16 +169,26 @@ int32_t ICM20948Sensor::runOnce()
 void ICM20948Sensor::calibrate(uint16_t forSeconds)
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
-    LOG_DEBUG("ICM20948 cal start %is", forSeconds);
+    LOG_DEBUG("Old calibration data: highestX = %f, lowestX = %f, highestY = %f, lowestY = %f, highestZ = %f, lowestZ = %f",
+              highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
+    LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
     if (sensor->dataReady()) {
         sensor->getAGMT();
-        seedCalibrationExtrema(sensor->agmt.mag.axes.x, sensor->agmt.mag.axes.y, sensor->agmt.mag.axes.z, highestX, lowestX,
-                               highestY, lowestY, highestZ, lowestZ);
+        highestX = sensor->agmt.mag.axes.x;
+        lowestX = sensor->agmt.mag.axes.x;
+        highestY = sensor->agmt.mag.axes.y;
+        lowestY = sensor->agmt.mag.axes.y;
+        highestZ = sensor->agmt.mag.axes.z;
+        lowestZ = sensor->agmt.mag.axes.z;
     } else {
-        seedCalibrationExtrema(0.0f, 0.0f, 0.0f, highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
+        highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
     }
 
-    startCalibrationWindow(forSeconds);
+    doCalibration = true;
+    uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
+    endCalibrationAt = millis() + calibrateFor;
+    if (screen)
+        screen->setEndCalibration(endCalibrationAt);
 #endif
 }
 // ----------------------------------------------------------------------
@@ -265,6 +314,11 @@ bool ICM20948Singleton::setWakeOnMotion()
     status = intEnableWOM(true);
     LOG_DEBUG("ICM20948 init set intEnableWOM - %s", statusString());
     return status == ICM_20948_Stat_Ok;
+
+    // Clear any current interrupts
+    ICM20948_IRQ = false;
+    clearInterrupts();
+    return true;
 }
 
 #endif

src/motion/ICM20948Sensor.h

@@ -83,7 +83,6 @@ class ICM20948Sensor : public MotionSensor
     ICM20948Singleton *sensor = nullptr;
     bool showingScreen = false;
     bool isAsleep = false;
-    static constexpr const char *compassCalibrationFileName = "/prefs/compass_icm20948.dat";
 #ifdef MUZI_BASE
     float highestX = 449.000000, lowestX = -140.000000, highestY = 422.000000, lowestY = -232.000000, highestZ = 749.000000,
           lowestZ = 98.000000;
@@ -104,4 +103,4 @@ class ICM20948Sensor : public MotionSensor
 
 #endif
 
-#endif
+#endif

src/motion/MotionSensor.cpp

@@ -1,37 +1,10 @@
 #include "MotionSensor.h"
-#include "FSCommon.h"
-#include "SPILock.h"
-#include "SafeFile.h"
 #include "graphics/draw/CompassRenderer.h"
 
 #if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 
 char timeRemainingBuffer[12];
 
-namespace
-{
-constexpr uint32_t COMPASS_CALIBRATION_MAGIC = 0x4D43414CL; // "MCAL"
-constexpr uint16_t COMPASS_CALIBRATION_VERSION = 1;
-
-struct CompassCalibrationRecord {
-    uint32_t magic;
-    uint16_t version;
-    uint16_t reserved;
-    float highestX;
-    float lowestX;
-    float highestY;
-    float lowestY;
-    float highestZ;
-    float lowestZ;
-};
-
-bool isRangeValid(float highest, float lowest)
-{
-    // NaN/Inf guard without pulling in extra math helpers.
-    return (highest == highest) && (lowest == lowest) && (highest > lowest);
-}
-} // namespace
-
 // screen is defined in main.cpp
 extern graphics::Screen *screen;
 
@@ -59,237 +32,33 @@ ScanI2C::I2CPort MotionSensor::devicePort()
     return device.address.port;
 }
 
-bool MotionSensor::saveMagnetometerCalibration(const char *filePath, float highestX, float lowestX, float highestY, float lowestY,
-                                               float highestZ, float lowestZ)
-{
-#ifdef FSCom
-    if (!isRangeValid(highestX, lowestX) || !isRangeValid(highestY, lowestY) || !isRangeValid(highestZ, lowestZ)) {
-        return false;
-    }
-
-    FSCom.mkdir("/prefs");
-    CompassCalibrationRecord record = {
-        COMPASS_CALIBRATION_MAGIC, COMPASS_CALIBRATION_VERSION, 0, highestX, lowestX, highestY, lowestY, highestZ, lowestZ};
-
-    auto file = SafeFile(filePath, true);
-    const size_t written = file.write(reinterpret_cast<const uint8_t *>(&record), sizeof(record));
-    return (written == sizeof(record)) && file.close();
-#else
-    return false;
-#endif
-}
-
-bool MotionSensor::loadMagnetometerCalibration(const char *filePath, float &highestX, float &lowestX, float &highestY,
-                                               float &lowestY, float &highestZ, float &lowestZ)
-{
-#ifdef FSCom
-    CompassCalibrationRecord record = {};
-    size_t bytesRead = 0;
-
-    spiLock->lock();
-    auto file = FSCom.open(filePath, FILE_O_READ);
-    if (!file) {
-        spiLock->unlock();
-        return false;
-    }
-    bytesRead = file.read(reinterpret_cast<uint8_t *>(&record), sizeof(record));
-    file.close();
-    spiLock->unlock();
-
-    const bool headerValid = (bytesRead == sizeof(record)) && (record.magic == COMPASS_CALIBRATION_MAGIC) &&
-                             (record.version == COMPASS_CALIBRATION_VERSION) && (record.reserved == 0U);
-    const bool rangeValid = isRangeValid(record.highestX, record.lowestX) && isRangeValid(record.highestY, record.lowestY) &&
-                            isRangeValid(record.highestZ, record.lowestZ);
-    if (!headerValid || !rangeValid) {
-        return false;
-    }
-
-    highestX = record.highestX;
-    lowestX = record.lowestX;
-    highestY = record.highestY;
-    lowestY = record.lowestY;
-    highestZ = record.highestZ;
-    lowestZ = record.lowestZ;
-
-    return true;
-#else
-    return false;
-#endif
-}
-
-void MotionSensor::beginCalibrationDisplay(bool &showingScreen)
-{
-#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
-    if (!showingScreen) {
-        powerFSM.trigger(EVENT_PRESS); // keep screen alive during calibration
-        showingScreen = true;
-        if (screen)
-            screen->startAlert((FrameCallback)drawFrameCalibration);
-    }
-#else
-    (void)showingScreen;
-#endif
-}
-
-void MotionSensor::finishCalibrationIfExpired(bool &showingScreen, const char *filePath, float highestX, float lowestX,
-                                              float highestY, float lowestY, float highestZ, float lowestZ)
-{
-    const uint32_t now = millis();
-    if ((int32_t)(now - endCalibrationAt) < 0)
-        return;
-
-    doCalibration = false;
-    endCalibrationAt = 0;
-    showingScreen = false;
-    saveMagnetometerCalibration(filePath, highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
-
-#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
-    if (screen) {
-        screen->setEndCalibration(0);
-        screen->endAlert();
-    }
-#endif
-}
-
-void MotionSensor::startCalibrationWindow(uint16_t forSeconds)
-{
-    doCalibration = true;
-    const uint32_t calibrateFor = static_cast<uint32_t>(forSeconds) * 1000U;
-    endCalibrationAt = millis() + calibrateFor;
-#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
-    if (screen)
-        screen->setEndCalibration(endCalibrationAt);
-#endif
-}
-
-void MotionSensor::seedCalibrationExtrema(float x, float y, float z, float &highestX, float &lowestX, float &highestY,
-                                          float &lowestY, float &highestZ, float &lowestZ)
-{
-    highestX = lowestX = x;
-    highestY = lowestY = y;
-    highestZ = lowestZ = z;
-}
-
-void MotionSensor::updateCalibrationExtrema(float x, float y, float z, float &highestX, float &lowestX, float &highestY,
-                                            float &lowestY, float &highestZ, float &lowestZ)
-{
-    if (x > highestX)
-        highestX = x;
-    if (x < lowestX)
-        lowestX = x;
-    if (y > highestY)
-        highestY = y;
-    if (y < lowestY)
-        lowestY = y;
-    if (z > highestZ)
-        highestZ = z;
-    if (z < lowestZ)
-        lowestZ = z;
-}
-
-float MotionSensor::applyCompassOrientation(float heading)
-{
-    switch (config.display.compass_orientation) {
-    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
-    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
-        return heading + 90;
-    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
-    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
-        return heading + 180;
-    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
-    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
-        return heading + 270;
-    default:
-        return heading;
-    }
-}
-
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
 void MotionSensor::drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     if (screen == nullptr)
         return;
+    // int x_offset = display->width() / 2;
+    // int y_offset = display->height() <= 80 ? 0 : 32;
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_MEDIUM);
+    display->drawString(x, y, "Calibrating\nCompass");
 
-    const int16_t width = display->getWidth();
-    const int16_t height = display->getHeight();
-    const bool compactLayout = (height <= 80);
-    const int16_t margin = 4;
-
-    const uint32_t now = millis();
-    const uint32_t endCalibrationAt = screen->getEndCalibration();
-    uint32_t timeRemaining = 0;
-    if (endCalibrationAt > now) {
-        timeRemaining = (endCalibrationAt - now + 999) / 1000;
-    }
+    uint8_t timeRemaining = (screen->getEndCalibration() - millis()) / 1000;
+    sprintf(timeRemainingBuffer, "( %02d )", timeRemaining);
+    display->setFont(FONT_SMALL);
+    display->drawString(x, y + 40, timeRemainingBuffer);
 
     int16_t compassX = 0, compassY = 0;
-    uint16_t compassDiam = graphics::CompassRenderer::getCompassDiam(width, height);
-    const int16_t compassRadius = compassDiam / 2;
+    uint16_t compassDiam = graphics::CompassRenderer::getCompassDiam(display->getWidth(), display->getHeight());
 
     // coordinates for the center of the compass/circle
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
-        compassX = x + width - compassRadius - margin;
-        compassY = y + height / 2;
+        compassX = x + display->getWidth() - compassDiam / 2 - 5;
+        compassY = y + display->getHeight() / 2;
     } else {
-        compassX = x + width - compassRadius - margin;
-        compassY = y + FONT_HEIGHT_SMALL + (height - FONT_HEIGHT_SMALL) / 2;
+        compassX = x + display->getWidth() - compassDiam / 2 - 5;
+        compassY = y + FONT_HEIGHT_SMALL + (display->getHeight() - FONT_HEIGHT_SMALL) / 2;
     }
-
-    const int16_t textLeft = x + 1;
-    const int16_t textRight = compassX - compassRadius - margin;
-    const int16_t textWidth = textRight - textLeft;
-    int16_t lineY = y;
-
-    display->setTextAlignment(TEXT_ALIGN_LEFT);
-    if (textWidth > 12) {
-        const char *title = "Cal";
-        const char *line1 = "Figure-8";
-        const char *line2 = "Rotate axes";
-        const char *line3 = "Away from metal";
-
-        display->setFont(FONT_SMALL);
-        if (!compactLayout && display->getStringWidth("Compass Calibration") <= textWidth) {
-            display->setFont(FONT_MEDIUM);
-            title = "Compass Calibration";
-            line1 = "Move in figure-8";
-            line2 = "Rotate all axes";
-            line3 = "Keep from metal";
-            display->drawString(textLeft, lineY, title);
-            lineY += FONT_HEIGHT_MEDIUM;
-            display->setFont(FONT_SMALL);
-        } else if (display->getStringWidth("Compass Cal") <= textWidth) {
-            title = "Compass Cal";
-            if (textWidth >= display->getStringWidth("Move in figure-8")) {
-                line1 = "Move in figure-8";
-                line2 = "Rotate all axes";
-                line3 = "Keep from metal";
-            }
-            display->drawString(textLeft, lineY, title);
-            lineY += FONT_HEIGHT_SMALL;
-        } else {
-            display->drawString(textLeft, lineY, title);
-            lineY += FONT_HEIGHT_SMALL;
-        }
-
-        display->drawString(textLeft, lineY, line1);
-        lineY += FONT_HEIGHT_SMALL;
-        display->drawString(textLeft, lineY, line2);
-        lineY += FONT_HEIGHT_SMALL;
-        if (!compactLayout || textWidth >= display->getStringWidth(line3)) {
-            display->drawString(textLeft, lineY, line3);
-        }
-    }
-
-    if (textWidth >= display->getStringWidth("000s left")) {
-        snprintf(timeRemainingBuffer, sizeof(timeRemainingBuffer), "%lus left", (unsigned long)timeRemaining);
-    } else {
-        snprintf(timeRemainingBuffer, sizeof(timeRemainingBuffer), "%lus", (unsigned long)timeRemaining);
-    }
-    display->setFont(FONT_SMALL);
-    if (textWidth > 12) {
-        display->drawString(textLeft, y + height - FONT_HEIGHT_SMALL - 1, timeRemainingBuffer);
-    }
-
     display->drawCircle(compassX, compassY, compassDiam / 2);
     graphics::CompassRenderer::drawCompassNorth(display, compassX, compassY, screen->getHeading() * PI / 180, (compassDiam / 2));
 }

src/motion/MotionSensor.h

@@ -2,7 +2,7 @@
 #ifndef _MOTION_SENSOR_H_
 #define _MOTION_SENSOR_H_
 
-#define MOTION_SENSOR_CHECK_INTERVAL_MS 50
+#define MOTION_SENSOR_CHECK_INTERVAL_MS 100
 #define MOTION_SENSOR_CLICK_THRESHOLD 40
 
 #include "../configuration.h"
@@ -54,20 +54,6 @@ class MotionSensor
     static void drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 #endif
 
-    bool saveMagnetometerCalibration(const char *filePath, float highestX, float lowestX, float highestY, float lowestY,
-                                     float highestZ, float lowestZ);
-    bool loadMagnetometerCalibration(const char *filePath, float &highestX, float &lowestX, float &highestY, float &lowestY,
-                                     float &highestZ, float &lowestZ);
-    void beginCalibrationDisplay(bool &showingScreen);
-    void finishCalibrationIfExpired(bool &showingScreen, const char *filePath, float highestX, float lowestX, float highestY,
-                                    float lowestY, float highestZ, float lowestZ);
-    void startCalibrationWindow(uint16_t forSeconds);
-    static void seedCalibrationExtrema(float x, float y, float z, float &highestX, float &lowestX, float &highestY,
-                                       float &lowestY, float &highestZ, float &lowestZ);
-    static void updateCalibrationExtrema(float x, float y, float z, float &highestX, float &lowestX, float &highestY,
-                                         float &lowestY, float &highestZ, float &lowestZ);
-    static float applyCompassOrientation(float heading);
-
     ScanI2C::FoundDevice device;
 
     // Do calibration if true
@@ -77,4 +63,4 @@ class MotionSensor
 
 #endif
 
-#endif
+#endif

src/mqtt/MQTT.cpp

@@ -322,8 +322,8 @@ bool connectPubSub(const PubSubConfig &config, PubSubClient &pubSub, Client &cli
     pubSub.setClient(client);
     pubSub.setServer(config.serverAddr.c_str(), config.serverPort);
 
-    LOG_INFO("Connecting directly to MQTT server %s, port: %d, username: %s, password: ***", config.serverAddr.c_str(),
-             config.serverPort, config.mqttUsername);
+    LOG_INFO("Connecting directly to MQTT server %s, port: %d, username: %s, password: %s", config.serverAddr.c_str(),
+             config.serverPort, config.mqttUsername, config.mqttPassword);
 
     // Generate node ID from nodenum for client identification
     std::string nodeId = nodeDB->getNodeId();

src/nimble/NimbleBluetooth.cpp

@@ -323,7 +323,7 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
     /**
      * Subclasses can use this as a hook to provide custom notifications for their transport (i.e. bluetooth notifies)
      */
-    virtual void onNowHasData(uint32_t fromRadioNum) override
+    virtual void onNowHasData(uint32_t fromRadioNum)
     {
         PhoneAPI::onNowHasData(fromRadioNum);
 
@@ -350,7 +350,7 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
     }
 
     /// Check the current underlying physical link to see if the client is currently connected
-    virtual bool checkIsConnected() override { return bleServer && bleServer->getConnectedCount() > 0; }
+    virtual bool checkIsConnected() { return bleServer && bleServer->getConnectedCount() > 0; }
 
     void requestHighThroughputConnection(uint16_t conn_handle)
     {
@@ -412,9 +412,9 @@ static uint8_t lastToRadio[MAX_TO_FROM_RADIO_SIZE];
 class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 {
 #ifdef NIMBLE_TWO
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo) override
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
 #else
-    virtual void onWrite(NimBLECharacteristic *pCharacteristic) override
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic)
 
 #endif
     {
@@ -464,9 +464,9 @@ class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 {
 #ifdef NIMBLE_TWO
-    virtual void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo) override
+    virtual void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
 #else
-    virtual void onRead(NimBLECharacteristic *pCharacteristic) override
+    virtual void onRead(NimBLECharacteristic *pCharacteristic)
 #endif
     {
         // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.
@@ -582,9 +582,9 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
   private:
     NimbleBluetooth *ble;
 
-    virtual uint32_t onPassKeyDisplay() override
+    virtual uint32_t onPassKeyDisplay()
 #else
-    virtual uint32_t onPassKeyRequest() override
+    virtual uint32_t onPassKeyRequest()
 #endif
     {
         uint32_t passkey = config.bluetooth.fixed_pin;
@@ -635,9 +635,9 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
     }
 
 #ifdef NIMBLE_TWO
-    virtual void onAuthenticationComplete(NimBLEConnInfo &connInfo) override
+    virtual void onAuthenticationComplete(NimBLEConnInfo &connInfo)
 #else
-    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc) override
+    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc)
 #endif
     {
         LOG_INFO("BLE authentication complete");
@@ -655,7 +655,7 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
     }
 
 #ifdef NIMBLE_TWO
-    virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo) override
+    virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo)
     {
         LOG_INFO("BLE incoming connection %s", connInfo.getAddress().toString().c_str());
 
@@ -683,11 +683,11 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
 #endif
 
 #ifdef NIMBLE_TWO
-    virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason) override
+    virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason)
     {
         LOG_INFO("BLE disconnect reason: %d", reason);
 #else
-    virtual void onDisconnect(NimBLEServer *pServer, ble_gap_conn_desc *desc) override
+    virtual void onDisconnect(NimBLEServer *pServer, ble_gap_conn_desc *desc)
     {
         LOG_INFO("BLE disconnect");
 #endif
@@ -989,4 +989,11 @@ void NimbleBluetooth::sendLog(const uint8_t *logMessage, size_t length)
 #endif
 }
 
+void clearNVS()
+{
+    NimBLEDevice::deleteAllBonds();
+#ifdef ARCH_ESP32
+    ESP.restart();
+#endif
+}
 #endif

src/nimble/NimbleBluetooth.h

@@ -24,4 +24,5 @@ class NimbleBluetooth : BluetoothApi
 #endif
 };
 
-void setBluetoothEnable(bool enable);
+void setBluetoothEnable(bool enable);
+void clearNVS();

src/platform/extra_variants/t5s3_epaper/variant.cpp

@@ -1,144 +0,0 @@
-#include "configuration.h"
-
-#ifdef T5_S3_EPAPER_PRO
-
-#include "Observer.h"
-#include "TouchDrvGT911.hpp"
-#include "Wire.h"
-#include "input/InputBroker.h"
-#include "input/TouchScreenImpl1.h"
-#include "sleep.h"
-
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-#include "graphics/niche/InkHUD/InkHUD.h"
-#include "graphics/niche/InkHUD/SystemApplet.h"
-
-// Bridges touch events from TouchScreenImpl1 directly into InkHUD,
-// bypassing the InputBroker (which is excluded in InkHUD builds).
-// Routing mirrors the mini-epaper-s3 two-way rocker pattern:
-//   - Nav left/right: prevApplet/nextApplet when idle, navUp/Down when a system applet has focus (e.g. menu)
-//   - Nav up/down:    navUp/navDown always (menu scroll)
-//   - Tap:            shortpress (cycle applets / confirm in menu)
-//   - Long press:     longpress (open menu / back)
-class TouchInkHUDBridge : public Observer<const InputEvent *>
-{
-    int onNotify(const InputEvent *e) override
-    {
-        auto *inkhud = NicheGraphics::InkHUD::InkHUD::getInstance();
-
-        // Keep alignment in sync with the current rotation so that visual-frame gestures
-        // always pass through nav functions without remapping: (rotation + alignment) % 4 == 0.
-        inkhud->persistence->settings.joystick.alignment = (4 - inkhud->persistence->settings.rotation) % 4;
-
-        // Check whether a system applet (e.g. menu) is currently handling input
-        bool systemHandlingInput = false;
-        for (NicheGraphics::InkHUD::SystemApplet *sa : inkhud->systemApplets) {
-            if (sa->handleInput) {
-                systemHandlingInput = true;
-                break;
-            }
-        }
-
-        switch (e->inputEvent) {
-        case INPUT_BROKER_USER_PRESS:
-            inkhud->shortpress();
-            break;
-        case INPUT_BROKER_SELECT:
-            inkhud->longpress();
-            break;
-        case INPUT_BROKER_LEFT:
-            if (systemHandlingInput)
-                inkhud->navUp();
-            else
-                inkhud->prevApplet();
-            break;
-        case INPUT_BROKER_RIGHT:
-            if (systemHandlingInput)
-                inkhud->navDown();
-            else
-                inkhud->nextApplet();
-            break;
-        case INPUT_BROKER_UP:
-            inkhud->navUp();
-            break;
-        case INPUT_BROKER_DOWN:
-            inkhud->navDown();
-            break;
-        default:
-            break;
-        }
-        return 0;
-    }
-};
-
-static TouchInkHUDBridge touchBridge;
-#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-
-TouchDrvGT911 touch;
-
-// Commands the GT911 into standby before the Wire bus is torn down.
-// notifyDeepSleep fires before Wire.end() in doDeepSleep(), so I2C is still available here.
-struct TouchDeepSleepObserver {
-    int onDeepSleep(void *)
-    {
-        touch.sleep();
-        return 0;
-    }
-    CallbackObserver<TouchDeepSleepObserver, void *> observer{this, &TouchDeepSleepObserver::onDeepSleep};
-} static touchDeepSleepObserver;
-
-bool readTouch(int16_t *x, int16_t *y)
-{
-    if (!digitalRead(GT911_PIN_INT)) {
-        int16_t raw_x;
-        int16_t raw_y;
-        if (touch.getPoint(&raw_x, &raw_y)) {
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-            // Transform raw GT911 axes to visual-frame coordinates for the current display rotation.
-            // rotation=3 is the physical identity (device's default orientation).
-            switch (NicheGraphics::InkHUD::InkHUD::getInstance()->persistence->settings.rotation) {
-            default:
-            case 3:
-                *x = raw_x;
-                *y = raw_y;
-                break; // identity
-            case 2:
-                *x = (EPD_WIDTH - 1) - raw_y;
-                *y = raw_x;
-                break; // 90° CW tilt
-            case 1:
-                *x = (EPD_HEIGHT - 1) - raw_x;
-                *y = (EPD_WIDTH - 1) - raw_y;
-                break; // 180° flip
-            case 0:
-                *x = raw_y;
-                *y = (EPD_HEIGHT - 1) - raw_x;
-                break; // 90° CCW tilt
-            }
-#else
-            *x = raw_x;
-            *y = raw_y;
-#endif
-            LOG_DEBUG("touched(%d/%d)", *x, *y);
-            return true;
-        }
-    }
-    return false;
-}
-
-// T5-S3-ePaper Pro specific (late-) init
-void lateInitVariant(void)
-{
-    touch.setPins(GT911_PIN_RST, GT911_PIN_INT);
-    if (touch.begin(Wire, GT911_SLAVE_ADDRESS_H, GT911_PIN_SDA, GT911_PIN_SCL)) {
-        touchDeepSleepObserver.observer.observe(&notifyDeepSleep);
-        touchScreenImpl1 = new TouchScreenImpl1(EPD_WIDTH, EPD_HEIGHT, readTouch);
-        touchScreenImpl1->init();
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-        touchBridge.observe(touchScreenImpl1);
-#endif
-    } else {
-        LOG_ERROR("Failed to find touch controller!");
-    }
-}
-#endif

src/platform/nrf52/NRF52Bluetooth.cpp

@@ -1,6 +1,7 @@
 #include "NRF52Bluetooth.h"
 #include "BLEDfuSecure.h"
 #include "BluetoothCommon.h"
+#include "HardwareRNG.h"
 #include "PowerFSM.h"
 #include "configuration.h"
 #include "main.h"
@@ -272,9 +273,13 @@ void NRF52Bluetooth::setup()
     Bluefruit.setTxPower(NRF52_BLE_TX_POWER);
 #endif
     if (config.bluetooth.mode != meshtastic_Config_BluetoothConfig_PairingMode_NO_PIN) {
-        configuredPasskey = config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_FIXED_PIN
-                                ? config.bluetooth.fixed_pin
-                                : random(100000, 999999);
+        if (config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_FIXED_PIN) {
+            configuredPasskey = config.bluetooth.fixed_pin;
+        } else {
+            uint32_t hwrand = 0;
+            HardwareRNG::fill(reinterpret_cast<uint8_t *>(&hwrand), sizeof(hwrand));
+            configuredPasskey = hwrand % 900000u + 100000u;
+        }
         auto pinString = std::to_string(configuredPasskey);
         LOG_INFO("Bluetooth pin set to '%i'", configuredPasskey);
         Bluefruit.Security.setPIN(pinString.c_str());

src/platform/portduino/PortduinoGlue.cpp

@@ -182,10 +182,6 @@ void portduinoSetup()
     // Force stdout to be line buffered
     setvbuf(stdout, stdoutBuffer, _IOLBF, sizeof(stdoutBuffer));
 
-    // We do this super early so that we can log from the rest of the init code
-    concurrency::hasBeenSetup = true;
-    consoleInit();
-
     if (portduino_config.force_simradio == true) {
         portduino_config.lora_module = use_simradio;
     } else if (configPath != nullptr) {

src/platform/stm32wl/hardfault_handler.s

@@ -1,11 +0,0 @@
-.globl HardFault_Handler
-.syntax unified
-.thumb
-
-.type HardFault_Handler, %function
-HardFault_Handler:
-tst lr, #4
-ite eq
-mrseq r0, msp
-mrsne r0, psp
-b HardFault_Handler_C

src/platform/stm32wl/main-stm32wl.cpp

@@ -1,60 +1,8 @@
 #include "RTC.h"
 #include "configuration.h"
-#include <stdarg.h>
 #include <stm32wle5xx.h>
 #include <stm32wlxx_hal.h>
 
-// ─── Bootloader redirect ──────────────────────────────────────────────────────
-//
-// Why .noinit + constructor instead of TAMP backup registers:
-//
-//   The STM32duino startup sequence initialises clocks which may call
-//   __HAL_RCC_BACKUPRESET_FORCE/RELEASE when configuring the LSE oscillator,
-//   wiping the entire backup domain (including TAMP->BKP0R) before setup()
-//   ever runs. The backup-register approach therefore cannot reliably survive
-//   a soft reset in this toolchain.
-//
-//   Solution: store the magic in a .noinit SRAM variable.
-//   - NVIC_SystemReset() does NOT clear SRAM.
-//   - The linker script skips zero-init for .noinit sections.
-//   - __attribute__((constructor)) fires before main()/HAL_Init(), so we can
-//     intercept and jump before anything disturbs peripheral state.
-
-#define BOOTLOADER_MAGIC 0xD00DB007UL
-#define SYS_MEM_BASE 0x1FFF0000UL
-
-// Placed in .noinit — not zeroed at startup, survives NVIC_SystemReset().
-__attribute__((section(".noinit"), used)) volatile uint32_t g_bootloaderMagic;
-
-// Fires before main() / HAL_Init(). Must use only core Cortex-M registers.
-__attribute__((constructor(101), used)) static void earlyBootCheck(void)
-{
-    if (g_bootloaderMagic != BOOTLOADER_MAGIC)
-        return;
-    g_bootloaderMagic = 0;
-
-    SysTick->CTRL = 0;
-    SysTick->LOAD = 0;
-    SysTick->VAL = 0;
-    for (int i = 0; i < 8; i++) {
-        NVIC->ICER[i] = 0xFFFFFFFF;
-        NVIC->ICPR[i] = 0xFFFFFFFF;
-    }
-    __DSB();
-    __ISB();
-    SCB->VTOR = SYS_MEM_BASE;
-    __set_MSP(*(volatile uint32_t *)SYS_MEM_BASE);
-    ((void (*)(void))(*(volatile uint32_t *)(SYS_MEM_BASE + 4)))();
-    while (1)
-        ;
-}
-
-void enterDfuMode()
-{
-    g_bootloaderMagic = BOOTLOADER_MAGIC;
-    HAL_NVIC_SystemReset();
-}
-
 void setBluetoothEnable(bool enable) {}
 
 void playStartMelody() {}
@@ -105,99 +53,4 @@ extern "C" void __wrap__tzset_unlocked_r(struct _reent *reent_ptr)
 {
     return;
 }
-#endif
-
-// Taken from https://interrupt.memfault.com/blog/cortex-m-hardfault-debug
-typedef struct __attribute__((packed)) ContextStateFrame {
-    uint32_t r0;
-    uint32_t r1;
-    uint32_t r2;
-    uint32_t r3;
-    uint32_t r12;
-    uint32_t lr;
-    uint32_t return_address;
-    uint32_t xpsr;
-} sContextStateFrame;
-
-// NOTE: If you are using CMSIS, the registers can also be
-// accessed through CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk
-#define HALT_IF_DEBUGGING()                                                                                                      \
-    do {                                                                                                                         \
-        if ((*(volatile uint32_t *)0xE000EDF0) & (1 << 0)) {                                                                     \
-            __asm("bkpt 1");                                                                                                     \
-        }                                                                                                                        \
-    } while (0)
-
-static char hardfault_message_buffer[256];
-
-// printf directly using srcwrapper's debug UART function.
-static void debug_printf(const char *format, ...)
-{
-    va_list args;
-    va_start(args, format);
-    int length = vsnprintf(hardfault_message_buffer, sizeof(hardfault_message_buffer), format, args);
-    va_end(args);
-
-    if (length < 0)
-        return;
-    uart_debug_write((uint8_t *)hardfault_message_buffer, min((unsigned int)length, sizeof(hardfault_message_buffer) - 1));
-}
-
-// N picked by guessing
-#define DOT_TIME 1200000
-static void dot()
-{
-    digitalWrite(LED_POWER, LED_STATE_ON);
-    for (volatile int i = 0; i < DOT_TIME; i++) { /* busy wait */
-    }
-    digitalWrite(LED_POWER, LED_STATE_OFF);
-    for (volatile int i = 0; i < DOT_TIME; i++) { /* busy wait */
-    }
-}
-
-static void dash()
-{
-    digitalWrite(LED_POWER, LED_STATE_ON);
-    for (volatile int i = 0; i < (DOT_TIME * 3); i++) { /* busy wait */
-    }
-    digitalWrite(LED_POWER, LED_STATE_OFF);
-    for (volatile int i = 0; i < DOT_TIME; i++) { /* busy wait */
-    }
-}
-
-static void space()
-{
-    for (volatile int i = 0; i < (DOT_TIME * 3); i++) { /* busy wait */
-    }
-}
-
-// Disable optimizations for this function so "frame" argument
-// does not get optimized away
-extern "C" __attribute__((optimize("O0"))) void HardFault_Handler_C(sContextStateFrame *frame)
-{
-    debug_printf("HardFault!\r\n");
-    debug_printf("r0: %08x\r\n", frame->r0);
-    debug_printf("r1: %08x\r\n", frame->r1);
-    debug_printf("r2: %08x\r\n", frame->r2);
-    debug_printf("r3: %08x\r\n", frame->r3);
-    debug_printf("r12: %08x\r\n", frame->r12);
-    debug_printf("lr: %08x\r\n", frame->lr);
-    debug_printf("pc[return address]: %08x\r\n", frame->return_address);
-    debug_printf("xpsr: %08x\r\n", frame->xpsr);
-
-    HALT_IF_DEBUGGING();
-
-    // blink SOS forever
-    while (1) {
-        dot();
-        dot();
-        dot();
-        dash();
-        dash();
-        dash();
-        dot();
-        dot();
-        dot();
-        space();
-    }
-}
+#endif

src/power.h

@@ -15,67 +15,14 @@
 
 // Device specific curves go in variant.h
 #ifndef OCV_ARRAY
-#if defined(ARCH_STM32WL) && BATTERY_PIN == AVBAT
-// STM32 VDD/VBAT absolute maximum is 4V so use an LFP curve
-#define OCV_ARRAY 3650, 3400, 3340, 3320, 3300, 3280, 3270, 3260, 3240, 3200, 2500
-#else
 #define OCV_ARRAY 4190, 4050, 3990, 3890, 3800, 3720, 3630, 3530, 3420, 3300, 3100
 #endif
-#endif
 
 /*Note: 12V lead acid is 6 cells, most board accept only 1 cell LiIon/LiPo*/
 #ifndef NUM_CELLS
 #define NUM_CELLS 1
 #endif
 
-// Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
-#ifndef BATTERY_SENSE_SAMPLES
-#define BATTERY_SENSE_SAMPLES 15
-#endif
-
-#ifndef ADC_MULTIPLIER
-#define ADC_MULTIPLIER 2.0
-#endif
-
-#ifdef EXT_PWR_DETECT
-#ifndef EXT_PWR_DETECT_MODE
-#define EXT_PWR_DETECT_MODE INPUT
-// If using internal pull resistors, we can infer EXT_PWR_DETECT_VALUE
-#elif EXT_PWR_DETECT_MODE == INPUT_PULLUP
-#define EXT_PWR_DETECT_VALUE LOW
-#elif EXT_PWR_DETECT_MODE == INPUT_PULLDOWN
-#define EXT_PWR_DETECT_VALUE HIGH
-#endif
-#ifndef EXT_PWR_DETECT_VALUE
-#define EXT_PWR_DETECT_VALUE HIGH
-#endif
-#endif
-
-#ifdef EXT_CHRG_DETECT
-#ifndef EXT_CHRG_DETECT_MODE
-#define EXT_CHRG_DETECT_MODE INPUT
-// If using internal pull resistors, we can infer EXT_CHRG_DETECT_VALUE
-#elif EXT_CHRG_DETECT_MODE == INPUT_PULLUP
-#define EXT_CHRG_DETECT_VALUE LOW
-#elif EXT_CHRG_DETECT_MODE == INPUT_PULLDOWN
-#define EXT_CHRG_DETECT_VALUE HIGH
-#endif
-#ifndef EXT_CHRG_DETECT_VALUE
-#define EXT_CHRG_DETECT_VALUE HIGH
-#endif
-#endif
-
-#ifndef DELAY_FOREVER
-#define DELAY_FOREVER portMAX_DELAY
-#endif
-
-// NRF52 has AREF_VOLTAGE defined in architecture.h but
-// make sure it's included. If something is wrong with NRF52
-// definition - compilation will fail on missing definition
-#if !defined(AREF_VOLTAGE) && !defined(ARCH_NRF52)
-#define AREF_VOLTAGE 3.3
-#endif
-
 #ifdef BAT_MEASURE_ADC_UNIT
 extern RTC_NOINIT_ATTR uint64_t RTC_reg_b;
 #include "soc/sens_reg.h" // needed for adc pin reset
@@ -134,31 +81,6 @@ extern RAK9154Sensor rak9154Sensor;
 extern XPowersLibInterface *PMU;
 #endif
 
-#ifndef HAS_PMU
-// Copy of the base class defined in axp20x.h, to prevent an automatic wire.h dependency
-class HasBatteryLevel
-{
-  public:
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() { return -1; }
-
-    /**
-     * The raw voltage of the battery or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() { return 0; }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() { return false; }
-
-    virtual bool isVbusIn() { return false; }
-    virtual bool isCharging() { return false; }
-};
-#endif
-
 class Power : public concurrency::OSThread
 {
 
@@ -173,7 +95,6 @@ class Power : public concurrency::OSThread
     virtual int32_t runOnce() override;
     void setStatusHandler(meshtastic::PowerStatus *handler) { statusHandler = handler; }
     const uint16_t OCV[11] = {OCV_ARRAY};
-    bool isLowBattery() { return low_voltage_counter >= 10; };
 
 #ifdef ARCH_ESP32
     int beforeLightSleep(void *unused);
@@ -183,8 +104,6 @@ class Power : public concurrency::OSThread
     void attachPowerInterrupts();
     void detachPowerInterrupts();
 
-    volatile bool pmu_irq = false;
-
   protected:
     meshtastic::PowerStatus *statusHandler;
 

test/test_admin_radio/test_main.cpp

@@ -1,814 +0,0 @@
-/**
- * Tests for the radio configuration validation and clamping functions
- * introduced in the radio_interface_cherrypick branch.
- *
- * Targets:
- *  1. getRegion()
- *  2. RadioInterface::validateConfigRegion()
- *  3. RadioInterface::validateConfigLora()
- *  4. RadioInterface::clampConfigLora()
- *  5. RegionInfo preset lists (PRESETS_STD, PRESETS_EU_868, PRESETS_UNDEF)
- *  6. Channel spacing calculation (placeholder for future protobuf changes)
- */
-
-#include "MeshRadio.h"
-#include "MeshService.h"
-#include "NodeDB.h"
-#include "RadioInterface.h"
-#include "TestUtil.h"
-#include "modules/AdminModule.h"
-#include <unity.h>
-
-#include "meshtastic/config.pb.h"
-
-class MockMeshService : public MeshService
-{
-  public:
-    void sendClientNotification(meshtastic_ClientNotification *n) override { releaseClientNotificationToPool(n); }
-};
-
-static MockMeshService *mockMeshService;
-
-// -----------------------------------------------------------------------
-// getRegion() tests
-// -----------------------------------------------------------------------
-extern const RegionInfo *getRegion(meshtastic_Config_LoRaConfig_RegionCode code);
-
-static void test_getRegion_returnsCorrectRegion_US()
-{
-    const RegionInfo *r = getRegion(meshtastic_Config_LoRaConfig_RegionCode_US);
-    TEST_ASSERT_NOT_NULL(r);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_RegionCode_US, r->code);
-    TEST_ASSERT_EQUAL_STRING("US", r->name);
-}
-
-static void test_getRegion_returnsCorrectRegion_EU868()
-{
-    const RegionInfo *r = getRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    TEST_ASSERT_NOT_NULL(r);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_RegionCode_EU_868, r->code);
-    TEST_ASSERT_EQUAL_STRING("EU_868", r->name);
-}
-
-static void test_getRegion_returnsCorrectRegion_LORA24()
-{
-    const RegionInfo *r = getRegion(meshtastic_Config_LoRaConfig_RegionCode_LORA_24);
-    TEST_ASSERT_NOT_NULL(r);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_RegionCode_LORA_24, r->code);
-    TEST_ASSERT_TRUE(r->wideLora);
-}
-
-static void test_getRegion_unsetCodeReturnsUnsetEntry()
-{
-    const RegionInfo *r = getRegion(meshtastic_Config_LoRaConfig_RegionCode_UNSET);
-    TEST_ASSERT_NOT_NULL(r);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_RegionCode_UNSET, r->code);
-    TEST_ASSERT_EQUAL_STRING("UNSET", r->name);
-}
-
-static void test_getRegion_unknownCodeFallsToUnset()
-{
-    // A code not in the table should iterate to the UNSET sentinel
-    const RegionInfo *r = getRegion((meshtastic_Config_LoRaConfig_RegionCode)255);
-    TEST_ASSERT_NOT_NULL(r);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_RegionCode_UNSET, r->code);
-}
-
-// -----------------------------------------------------------------------
-// validateConfigRegion() tests
-// -----------------------------------------------------------------------
-
-static void test_validateConfigRegion_validRegionReturnsTrue()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-
-    // Ensure owner is not licensed (should not matter for non-licensed-only regions)
-    devicestate.owner.is_licensed = false;
-
-    TEST_ASSERT_TRUE(RadioInterface::validateConfigRegion(cfg));
-}
-
-static void test_validateConfigRegion_unsetRegionReturnsTrue()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
-
-    devicestate.owner.is_licensed = false;
-
-    // UNSET region has licensedOnly=false, so should pass
-    TEST_ASSERT_TRUE(RadioInterface::validateConfigRegion(cfg));
-}
-
-// -----------------------------------------------------------------------
-// Shadow tables for testing (preset lists → profiles → regions → lookup)
-// -----------------------------------------------------------------------
-
-// A minimal preset list with only one entry
-static const meshtastic_Config_LoRaConfig_ModemPreset TEST_PRESETS_SINGLE[] = {
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,
-    MODEM_PRESET_END,
-};
-
-// A preset list that includes all turbo variants only
-static const meshtastic_Config_LoRaConfig_ModemPreset TEST_PRESETS_TURBO_ONLY[] = {
-    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO,
-    MODEM_PRESET_END,
-};
-
-// A restricted list simulating a hypothetical tight-regulation region
-static const meshtastic_Config_LoRaConfig_ModemPreset TEST_PRESETS_RESTRICTED[] = {
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-    meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE,
-    MODEM_PRESET_END,
-};
-
-// Mirrors PROFILE_STD but with non-zero spacing/padding for testing
-static const RegionProfile TEST_PROFILE_SPACED = {
-    TEST_PRESETS_SINGLE,
-    /* spacing */ 0.025f,
-    /* padding */ 0.010f,
-    /* audioPermitted */ true,
-    /* licensedOnly */ false,
-    /* textThrottle */ 0,
-    /* positionThrottle */ 0,
-    /* telemetryThrottle */ 0,
-    /* overrideSlot */ 0,
-};
-
-// A licensed-only profile for testing access control
-static const RegionProfile TEST_PROFILE_LICENSED = {
-    TEST_PRESETS_RESTRICTED,
-    /* spacing */ 0.0f,
-    /* padding */ 0.0f,
-    /* audioPermitted */ false,
-    /* licensedOnly */ true,
-    /* textThrottle */ 5,
-    /* positionThrottle */ 10,
-    /* telemetryThrottle */ 10,
-    /* overrideSlot */ 3,
-};
-
-// Turbo-only profile
-static const RegionProfile TEST_PROFILE_TURBO = {
-    TEST_PRESETS_TURBO_ONLY,
-    /* spacing */ 0.0f,
-    /* padding */ 0.0f,
-    /* audioPermitted */ true,
-    /* licensedOnly */ false,
-    /* textThrottle */ 0,
-    /* positionThrottle */ 0,
-    /* telemetryThrottle */ 0,
-    /* overrideSlot */ 0,
-};
-
-static const RegionInfo testRegions[] = {
-    // A wide US-like region with spacing + padding
-    {meshtastic_Config_LoRaConfig_RegionCode_US, 902.0f, 928.0f, 100, 30, false, false, &TEST_PROFILE_SPACED, "TEST_US_SPACED"},
-
-    // A narrow band simulating tight EU regulation
-    {meshtastic_Config_LoRaConfig_RegionCode_EU_868, 869.4f, 869.65f, 10, 14, false, false, &TEST_PROFILE_LICENSED,
-     "TEST_EU_LICENSED"},
-
-    // A wide-LoRa region with turbo-only presets
-    {meshtastic_Config_LoRaConfig_RegionCode_LORA_24, 2400.0f, 2483.5f, 100, 10, false, true, &TEST_PROFILE_TURBO,
-     "TEST_LORA24_TURBO"},
-
-    // Sentinel — must be last
-    {meshtastic_Config_LoRaConfig_RegionCode_UNSET, 902.0f, 928.0f, 100, 30, false, false, &TEST_PROFILE_SPACED, "TEST_UNSET"},
-};
-
-static const RegionInfo *getTestRegion(meshtastic_Config_LoRaConfig_RegionCode code)
-{
-    const RegionInfo *r = testRegions;
-    while (r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-        if (r->code == code)
-            return r;
-        r++;
-    }
-    return r; // Returns the UNSET sentinel
-}
-
-// -----------------------------------------------------------------------
-// Shadow table tests
-// -----------------------------------------------------------------------
-
-static void test_shadowTable_spacedProfileHasNonZeroSpacing()
-{
-    const RegionInfo *r = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_US);
-    TEST_ASSERT_EQUAL_STRING("TEST_US_SPACED", r->name);
-    TEST_ASSERT_FLOAT_WITHIN(0.001f, 0.025f, r->profile->spacing);
-    TEST_ASSERT_FLOAT_WITHIN(0.001f, 0.010f, r->profile->padding);
-}
-
-static void test_shadowTable_licensedProfileFlagsCorrect()
-{
-    const RegionInfo *r = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    TEST_ASSERT_TRUE(r->profile->licensedOnly);
-    TEST_ASSERT_FALSE(r->profile->audioPermitted);
-    TEST_ASSERT_EQUAL(3, r->profile->overrideSlot);
-}
-
-static void test_shadowTable_presetCountMatchesExpected()
-{
-    const RegionInfo *spaced = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_US);
-    TEST_ASSERT_EQUAL(1, spaced->getNumPresets());
-
-    const RegionInfo *licensed = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    TEST_ASSERT_EQUAL(2, licensed->getNumPresets());
-
-    const RegionInfo *turbo = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_LORA_24);
-    TEST_ASSERT_EQUAL(2, turbo->getNumPresets());
-}
-
-static void test_shadowTable_defaultPresetIsFirstInList()
-{
-    const RegionInfo *spaced = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_US);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, spaced->getDefaultPreset());
-
-    const RegionInfo *licensed = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW, licensed->getDefaultPreset());
-
-    const RegionInfo *turbo = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_LORA_24);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO, turbo->getDefaultPreset());
-}
-
-static void test_shadowTable_channelSpacingWithPadding()
-{
-    // Verify channel count when spacing + padding are non-zero
-    const RegionInfo *r = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_US);
-    float bw = modemPresetToBwKHz(r->getDefaultPreset(), r->wideLora);
-    float channelSpacing = r->profile->spacing + (r->profile->padding * 2) + (bw / 1000.0f);
-
-    // spacing=0.025, padding=0.010*2=0.020, bw=250kHz=0.250
-    // channelSpacing = 0.025 + 0.020 + 0.250 = 0.295 MHz
-    TEST_ASSERT_FLOAT_WITHIN(0.001f, 0.295f, channelSpacing);
-
-    uint32_t numChannels = (uint32_t)(((r->freqEnd - r->freqStart + r->profile->spacing) / channelSpacing) + 0.5f);
-    // (928 - 902 + 0.025) / 0.295 = 88.2 → 88
-    TEST_ASSERT_EQUAL_UINT32(88, numChannels);
-}
-
-static void test_shadowTable_turboOnlyOnWideLora()
-{
-    const RegionInfo *r = getTestRegion(meshtastic_Config_LoRaConfig_RegionCode_LORA_24);
-    TEST_ASSERT_TRUE(r->wideLora);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO, r->getDefaultPreset());
-
-    // Verify wide-LoRa bandwidth for SHORT_TURBO
-    float bw = modemPresetToBwKHz(r->getDefaultPreset(), r->wideLora);
-    TEST_ASSERT_FLOAT_WITHIN(0.1f, 1625.0f, bw); // 1625 kHz in wide mode
-}
-
-static void test_shadowTable_unknownCodeFallsToSentinel()
-{
-    const RegionInfo *r = getTestRegion((meshtastic_Config_LoRaConfig_RegionCode)200);
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_RegionCode_UNSET, r->code);
-    TEST_ASSERT_EQUAL_STRING("TEST_UNSET", r->name);
-}
-
-// -----------------------------------------------------------------------
-// validateConfigLora() tests
-// -----------------------------------------------------------------------
-
-static void test_validateConfigLora_validPresetForUS()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.use_preset = true;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-
-    TEST_ASSERT_TRUE(RadioInterface::validateConfigLora(cfg));
-}
-
-static void test_validateConfigLora_allStdPresetsValidForUS()
-{
-    meshtastic_Config_LoRaConfig_ModemPreset stdPresets[] = {
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-        meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW,   meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST,
-        meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW,    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO,
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO,
-    };
-
-    for (size_t i = 0; i < sizeof(stdPresets) / sizeof(stdPresets[0]); i++) {
-        meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-        cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-        cfg.use_preset = true;
-        cfg.modem_preset = stdPresets[i];
-        TEST_ASSERT_TRUE_MESSAGE(RadioInterface::validateConfigLora(cfg), "Expected valid preset for US");
-    }
-}
-
-static void test_validateConfigLora_turboPresetsInvalidForEU868()
-{
-    // EU_868 has PRESETS_EU_868 which excludes SHORT_TURBO and LONG_TURBO
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    cfg.use_preset = true;
-
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-    TEST_ASSERT_FALSE_MESSAGE(RadioInterface::validateConfigLora(cfg), "SHORT_TURBO should be invalid for EU_868");
-
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO;
-    TEST_ASSERT_FALSE_MESSAGE(RadioInterface::validateConfigLora(cfg), "LONG_TURBO should be invalid for EU_868");
-}
-
-static void test_validateConfigLora_validPresetsForEU868()
-{
-    meshtastic_Config_LoRaConfig_ModemPreset eu868Presets[] = {
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-        meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW,   meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST,
-        meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW,    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE,
-    };
-
-    for (size_t i = 0; i < sizeof(eu868Presets) / sizeof(eu868Presets[0]); i++) {
-        meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-        cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-        cfg.use_preset = true;
-        cfg.modem_preset = eu868Presets[i];
-        TEST_ASSERT_TRUE_MESSAGE(RadioInterface::validateConfigLora(cfg), "Expected valid preset for EU_868");
-    }
-}
-
-static void test_validateConfigLora_customBandwidthTooWideForEU868()
-{
-    // EU_868 spans 869.4 - 869.65 = 0.25 MHz = 250 kHz
-    // A 500 kHz custom BW should be rejected
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    cfg.use_preset = false;
-    cfg.bandwidth = 500;
-    cfg.spread_factor = 11;
-    cfg.coding_rate = 5;
-
-    TEST_ASSERT_FALSE(RadioInterface::validateConfigLora(cfg));
-}
-
-static void test_validateConfigLora_customBandwidthFitsUS()
-{
-    // US spans 902 - 928 = 26 MHz, so 250 kHz BW fits easily
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.use_preset = false;
-    cfg.bandwidth = 250;
-    cfg.spread_factor = 11;
-    cfg.coding_rate = 5;
-
-    TEST_ASSERT_TRUE(RadioInterface::validateConfigLora(cfg));
-}
-
-static void test_validateConfigLora_customBandwidthFitsEU868()
-{
-    // EU_868 spans 250 kHz, 125 kHz BW should fit
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    cfg.use_preset = false;
-    cfg.bandwidth = 125;
-    cfg.spread_factor = 12;
-    cfg.coding_rate = 8;
-
-    TEST_ASSERT_TRUE(RadioInterface::validateConfigLora(cfg));
-}
-
-static void test_validateConfigLora_bogusPresetRejected()
-{
-    // A fabricated preset value not in any list should be rejected
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.use_preset = true;
-    cfg.modem_preset = (meshtastic_Config_LoRaConfig_ModemPreset)99;
-
-    TEST_ASSERT_FALSE(RadioInterface::validateConfigLora(cfg));
-}
-
-static void test_validateConfigLora_unsetRegionOnlyAcceptsLongFast()
-{
-    // UNSET uses PROFILE_UNDEF which has only LONG_FAST
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
-    cfg.use_preset = true;
-
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-    TEST_ASSERT_TRUE_MESSAGE(RadioInterface::validateConfigLora(cfg), "LONG_FAST should be valid for UNSET");
-
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-    TEST_ASSERT_FALSE_MESSAGE(RadioInterface::validateConfigLora(cfg), "MEDIUM_FAST should be invalid for UNSET");
-
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-    TEST_ASSERT_FALSE_MESSAGE(RadioInterface::validateConfigLora(cfg), "SHORT_TURBO should be invalid for UNSET");
-}
-
-static void test_validateConfigLora_allPresetsValidForLORA24()
-{
-    // LORA_24 uses PROFILE_STD (9 presets) with wideLora=true
-    meshtastic_Config_LoRaConfig_ModemPreset stdPresets[] = {
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST,     meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW,
-        meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW,   meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST,
-        meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW,    meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST,
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO,
-        meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO,
-    };
-
-    for (size_t i = 0; i < sizeof(stdPresets) / sizeof(stdPresets[0]); i++) {
-        meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-        cfg.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24;
-        cfg.use_preset = true;
-        cfg.modem_preset = stdPresets[i];
-        TEST_ASSERT_TRUE_MESSAGE(RadioInterface::validateConfigLora(cfg), "Expected valid preset for LORA_24");
-    }
-}
-
-// -----------------------------------------------------------------------
-// clampConfigLora() tests
-// -----------------------------------------------------------------------
-
-static void test_clampConfigLora_invalidPresetClampedToDefault()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    cfg.use_preset = true;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO; // not in EU_868 preset list
-
-    RadioInterface::clampConfigLora(cfg);
-
-    const RegionInfo *eu868 = getRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    TEST_ASSERT_EQUAL(eu868->getDefaultPreset(), cfg.modem_preset);
-}
-
-static void test_clampConfigLora_validPresetUnchanged()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.use_preset = true;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-
-    RadioInterface::clampConfigLora(cfg);
-
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST, cfg.modem_preset);
-}
-
-static void test_clampConfigLora_customBwTooWideClampedToDefaultBw()
-{
-    // EU_868 span is 250kHz. A 500kHz custom BW should be clamped to default preset BW.
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    cfg.use_preset = false;
-    cfg.bandwidth = 500;
-    cfg.spread_factor = 11;
-    cfg.coding_rate = 5;
-
-    RadioInterface::clampConfigLora(cfg);
-
-    const RegionInfo *eu868 = getRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    float expectedBw = modemPresetToBwKHz(eu868->getDefaultPreset(), eu868->wideLora);
-    TEST_ASSERT_FLOAT_WITHIN(0.01f, expectedBw, (float)cfg.bandwidth);
-}
-
-static void test_clampConfigLora_customBwValidLeftUnchanged()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.use_preset = false;
-    cfg.bandwidth = 125;
-    cfg.spread_factor = 12;
-    cfg.coding_rate = 8;
-
-    RadioInterface::clampConfigLora(cfg);
-
-    TEST_ASSERT_EQUAL_UINT16(125, cfg.bandwidth);
-}
-
-static void test_clampConfigLora_bogusPresetOnUnsetClampedToLongFast()
-{
-    // UNSET uses PROFILE_UNDEF with only LONG_FAST; any other preset should clamp to it
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
-    cfg.use_preset = true;
-    cfg.modem_preset = (meshtastic_Config_LoRaConfig_ModemPreset)99;
-
-    RadioInterface::clampConfigLora(cfg);
-
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, cfg.modem_preset);
-}
-
-static void test_clampConfigLora_invalidPresetOnLORA24ClampedToDefault()
-{
-    // LORA_24 uses PROFILE_STD; a bogus preset should clamp to LONG_FAST (first in PRESETS_STD)
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24;
-    cfg.use_preset = true;
-    cfg.modem_preset = (meshtastic_Config_LoRaConfig_ModemPreset)99;
-
-    RadioInterface::clampConfigLora(cfg);
-
-    const RegionInfo *lora24 = getRegion(meshtastic_Config_LoRaConfig_RegionCode_LORA_24);
-    TEST_ASSERT_EQUAL(lora24->getDefaultPreset(), cfg.modem_preset);
-}
-
-// -----------------------------------------------------------------------
-// RegionInfo preset list integrity tests
-// -----------------------------------------------------------------------
-
-static void test_presetsStd_hasNineEntries()
-{
-    // PROFILE_STD should have exactly 9 presets
-    const RegionInfo *us = getRegion(meshtastic_Config_LoRaConfig_RegionCode_US);
-    TEST_ASSERT_EQUAL(9, us->getNumPresets());
-    TEST_ASSERT_EQUAL_PTR(PROFILE_STD.presets, us->getAvailablePresets());
-}
-
-static void test_presetsEU868_hasSevenEntries()
-{
-    const RegionInfo *eu = getRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    TEST_ASSERT_EQUAL(7, eu->getNumPresets());
-    TEST_ASSERT_EQUAL_PTR(PROFILE_EU868.presets, eu->getAvailablePresets());
-}
-
-static void test_presetsUndef_hasOneEntry()
-{
-    const RegionInfo *unset = getRegion(meshtastic_Config_LoRaConfig_RegionCode_UNSET);
-    TEST_ASSERT_EQUAL(1, unset->getNumPresets());
-    TEST_ASSERT_EQUAL_PTR(PROFILE_UNDEF.presets, unset->getAvailablePresets());
-}
-
-static void test_defaultPresetIsInAvailablePresets()
-{
-    // For every region, the defaultPreset must appear in its own availablePresets list
-    const RegionInfo *r = regions;
-    while (true) {
-        bool found = false;
-        for (size_t i = 0; i < r->getNumPresets(); i++) {
-            if (r->getAvailablePresets()[i] == r->getDefaultPreset()) {
-                found = true;
-                break;
-            }
-        }
-        char msg[80];
-        snprintf(msg, sizeof(msg), "Region %s defaultPreset not in availablePresets", r->name);
-        TEST_ASSERT_TRUE_MESSAGE(found, msg);
-
-        if (r->code == meshtastic_Config_LoRaConfig_RegionCode_UNSET)
-            break; // UNSET is the sentinel, stop after it
-        r++;
-    }
-}
-
-static void test_regionFieldsAreSane()
-{
-    // Basic sanity check: all regions have freqEnd > freqStart and a non-null name
-    const RegionInfo *r = regions;
-    while (true) {
-        char msg[80];
-        snprintf(msg, sizeof(msg), "Region %s: freqEnd must be > freqStart", r->name);
-        TEST_ASSERT_TRUE_MESSAGE(r->freqEnd > r->freqStart, msg);
-        TEST_ASSERT_NOT_NULL(r->name);
-        TEST_ASSERT_TRUE_MESSAGE(r->getNumPresets() > 0, "numPresets must be > 0");
-        TEST_ASSERT_NOT_NULL(r->getAvailablePresets());
-
-        if (r->code == meshtastic_Config_LoRaConfig_RegionCode_UNSET)
-            break;
-        r++;
-    }
-}
-
-static void test_onlyLORA24HasWideLora()
-{
-    // Verify that LORA_24 is the only region with wideLora=true
-    const RegionInfo *r = regions;
-    while (true) {
-        char msg[80];
-        if (r->code == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) {
-            snprintf(msg, sizeof(msg), "Region %s should have wideLora=true", r->name);
-            TEST_ASSERT_TRUE_MESSAGE(r->wideLora, msg);
-        } else {
-            snprintf(msg, sizeof(msg), "Region %s should have wideLora=false", r->name);
-            TEST_ASSERT_FALSE_MESSAGE(r->wideLora, msg);
-        }
-
-        if (r->code == meshtastic_Config_LoRaConfig_RegionCode_UNSET)
-            break;
-        r++;
-    }
-}
-
-// -----------------------------------------------------------------------
-// Channel spacing calculation (placeholder for future protobuf updates)
-// -----------------------------------------------------------------------
-
-static void test_channelSpacingCalculation_US_LONG_FAST()
-{
-    // Current formula: channelSpacing = spacing + (padding * 2) + (bw / 1000)
-    // US: spacing=0, padding=0
-    // LONG_FAST on non-wide region: bw=250 kHz
-    // channelSpacing = 0 + 0 + 0.250 = 0.250 MHz
-    // numChannels = round((928 - 902 + 0) / 0.250) = round(104) = 104
-    const RegionInfo *us = getRegion(meshtastic_Config_LoRaConfig_RegionCode_US);
-    float bw = modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, us->wideLora);
-    float channelSpacing = us->profile->spacing + (us->profile->padding * 2) + (bw / 1000.0f);
-    uint32_t numChannels = (uint32_t)(((us->freqEnd - us->freqStart + us->profile->spacing) / channelSpacing) + 0.5f);
-
-    TEST_ASSERT_FLOAT_WITHIN(0.001f, 0.250f, channelSpacing);
-    TEST_ASSERT_EQUAL_UINT32(104, numChannels);
-}
-
-static void test_channelSpacingCalculation_EU868_LONG_FAST()
-{
-    // EU_868: freqStart=869.4, freqEnd=869.65, spacing=0, padding=0
-    // LONG_FAST: bw=250 kHz => channelSpacing = 0.250 MHz
-    // numChannels = round((0.25 + 0) / 0.250) = 1
-    const RegionInfo *eu = getRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    float bw = modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, eu->wideLora);
-    float channelSpacing = eu->profile->spacing + (eu->profile->padding * 2) + (bw / 1000.0f);
-    uint32_t numChannels = (uint32_t)(((eu->freqEnd - eu->freqStart + eu->profile->spacing) / channelSpacing) + 0.5f);
-
-    TEST_ASSERT_FLOAT_WITHIN(0.001f, 0.250f, channelSpacing);
-    TEST_ASSERT_EQUAL_UINT32(1, numChannels);
-}
-
-// Placeholder: when protobuf region definitions include non-zero padding/spacing,
-// add tests here to verify the channel count and frequency calculations.
-static void test_channelSpacingCalculation_placeholder()
-{
-    // TODO: Once protobuf RegionInfo entries have non-zero padding or spacing values,
-    // verify:
-    //  - Channel count matches expected value for each (region, preset) pair
-    //  - First channel frequency = freqStart + (bw/2000) + padding
-    //  - Nth channel frequency = first + (n * channelSpacing)
-    //  - overrideSlot, when non-zero, forces the channel_num
-    TEST_PASS_MESSAGE("Placeholder for future channel spacing tests with updated protobuf region fields");
-}
-
-// -----------------------------------------------------------------------
-// handleSetConfig fromOthers dispatch tests
-// -----------------------------------------------------------------------
-
-class AdminModuleTestShim : public AdminModule
-{
-  public:
-    using AdminModule::handleSetConfig;
-};
-
-static AdminModuleTestShim *testAdmin;
-
-static meshtastic_Config makeLoraSetConfig(meshtastic_Config_LoRaConfig_RegionCode region, bool usePreset,
-                                           meshtastic_Config_LoRaConfig_ModemPreset preset)
-{
-    meshtastic_Config c = meshtastic_Config_init_zero;
-    c.which_payload_variant = meshtastic_Config_lora_tag;
-    c.payload_variant.lora.region = region;
-    c.payload_variant.lora.use_preset = usePreset;
-    c.payload_variant.lora.modem_preset = preset;
-    return c;
-}
-
-static void test_handleSetConfig_fromOthers_invalidPresetRejected()
-{
-    // Set up a known-good baseline in the global config
-    config.lora = meshtastic_Config_LoRaConfig_init_zero;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    config.lora.use_preset = true;
-    config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-    initRegion();
-
-    // Build an admin set_config with an invalid preset for EU_868
-    meshtastic_Config c = makeLoraSetConfig(meshtastic_Config_LoRaConfig_RegionCode_EU_868, true,
-                                            meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO);
-
-    testAdmin->handleSetConfig(c, true); // fromOthers = true
-
-    // fromOthers=true: invalid preset should be rejected, old preset preserved
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, config.lora.modem_preset);
-}
-
-static void test_handleSetConfig_fromLocal_invalidPresetClamped()
-{
-    // Set up a known-good baseline
-    config.lora = meshtastic_Config_LoRaConfig_init_zero;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    config.lora.use_preset = true;
-    config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-    initRegion();
-
-    // Build an admin set_config with an invalid preset for EU_868
-    meshtastic_Config c = makeLoraSetConfig(meshtastic_Config_LoRaConfig_RegionCode_EU_868, true,
-                                            meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO);
-
-    testAdmin->handleSetConfig(c, false); // fromOthers = false (local client)
-
-    // fromOthers=false: invalid preset should be clamped to the region's default
-    const RegionInfo *eu868 = getRegion(meshtastic_Config_LoRaConfig_RegionCode_EU_868);
-    TEST_ASSERT_EQUAL(eu868->getDefaultPreset(), config.lora.modem_preset);
-}
-
-static void test_handleSetConfig_fromOthers_validPresetAccepted()
-{
-    // Set up baseline
-    config.lora = meshtastic_Config_LoRaConfig_init_zero;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    config.lora.use_preset = true;
-    config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-    initRegion();
-
-    // Build an admin set_config with a valid preset for EU_868
-    meshtastic_Config c = makeLoraSetConfig(meshtastic_Config_LoRaConfig_RegionCode_EU_868, true,
-                                            meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST);
-
-    testAdmin->handleSetConfig(c, true); // fromOthers = true
-
-    // Valid preset should be accepted regardless of fromOthers
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST, config.lora.modem_preset);
-}
-
-// -----------------------------------------------------------------------
-// Test runner
-// -----------------------------------------------------------------------
-
-void setUp(void)
-{
-    mockMeshService = new MockMeshService();
-    service = mockMeshService;
-    testAdmin = new AdminModuleTestShim();
-}
-void tearDown(void)
-{
-    service = nullptr;
-    delete mockMeshService;
-    mockMeshService = nullptr;
-    delete testAdmin;
-    testAdmin = nullptr;
-}
-
-void setup()
-{
-    delay(10);
-    delay(2000);
-
-    initializeTestEnvironment();
-
-    UNITY_BEGIN();
-
-    // getRegion()
-    RUN_TEST(test_getRegion_returnsCorrectRegion_US);
-    RUN_TEST(test_getRegion_returnsCorrectRegion_EU868);
-    RUN_TEST(test_getRegion_returnsCorrectRegion_LORA24);
-    RUN_TEST(test_getRegion_unsetCodeReturnsUnsetEntry);
-    RUN_TEST(test_getRegion_unknownCodeFallsToUnset);
-
-    // validateConfigRegion()
-    RUN_TEST(test_validateConfigRegion_validRegionReturnsTrue);
-    RUN_TEST(test_validateConfigRegion_unsetRegionReturnsTrue);
-
-    // Shadow table tests
-    RUN_TEST(test_shadowTable_spacedProfileHasNonZeroSpacing);
-    RUN_TEST(test_shadowTable_licensedProfileFlagsCorrect);
-    RUN_TEST(test_shadowTable_presetCountMatchesExpected);
-    RUN_TEST(test_shadowTable_defaultPresetIsFirstInList);
-    RUN_TEST(test_shadowTable_channelSpacingWithPadding);
-    RUN_TEST(test_shadowTable_turboOnlyOnWideLora);
-    RUN_TEST(test_shadowTable_unknownCodeFallsToSentinel);
-
-    // validateConfigLora()
-    RUN_TEST(test_validateConfigLora_validPresetForUS);
-    RUN_TEST(test_validateConfigLora_allStdPresetsValidForUS);
-    RUN_TEST(test_validateConfigLora_turboPresetsInvalidForEU868);
-    RUN_TEST(test_validateConfigLora_validPresetsForEU868);
-    RUN_TEST(test_validateConfigLora_customBandwidthTooWideForEU868);
-    RUN_TEST(test_validateConfigLora_customBandwidthFitsUS);
-    RUN_TEST(test_validateConfigLora_customBandwidthFitsEU868);
-    RUN_TEST(test_validateConfigLora_bogusPresetRejected);
-    RUN_TEST(test_validateConfigLora_unsetRegionOnlyAcceptsLongFast);
-    RUN_TEST(test_validateConfigLora_allPresetsValidForLORA24);
-
-    // clampConfigLora()
-    RUN_TEST(test_clampConfigLora_invalidPresetClampedToDefault);
-    RUN_TEST(test_clampConfigLora_validPresetUnchanged);
-    RUN_TEST(test_clampConfigLora_customBwTooWideClampedToDefaultBw);
-    RUN_TEST(test_clampConfigLora_customBwValidLeftUnchanged);
-    RUN_TEST(test_clampConfigLora_bogusPresetOnUnsetClampedToLongFast);
-    RUN_TEST(test_clampConfigLora_invalidPresetOnLORA24ClampedToDefault);
-
-    // RegionInfo preset list integrity
-    RUN_TEST(test_presetsStd_hasNineEntries);
-    RUN_TEST(test_presetsEU868_hasSevenEntries);
-    RUN_TEST(test_presetsUndef_hasOneEntry);
-    RUN_TEST(test_defaultPresetIsInAvailablePresets);
-    RUN_TEST(test_regionFieldsAreSane);
-    RUN_TEST(test_onlyLORA24HasWideLora);
-
-    // Channel spacing (current + placeholder)
-    RUN_TEST(test_channelSpacingCalculation_US_LONG_FAST);
-    RUN_TEST(test_channelSpacingCalculation_EU868_LONG_FAST);
-    RUN_TEST(test_channelSpacingCalculation_placeholder);
-
-    // handleSetConfig fromOthers dispatch
-    RUN_TEST(test_handleSetConfig_fromOthers_invalidPresetRejected);
-    RUN_TEST(test_handleSetConfig_fromLocal_invalidPresetClamped);
-    RUN_TEST(test_handleSetConfig_fromOthers_validPresetAccepted);
-
-    exit(UNITY_END());
-}
-
-void loop() {}

test/test_packet_history/test_main.cpp

@@ -1,834 +0,0 @@
-/*
- * Unit tests for PacketHistory — the packet deduplication engine
- * used by the mesh routing stack.
- *
- * PacketHistory maintains a fixed-size array of PacketRecords with an
- * optional hash table for O(1) lookup. It tracks which nodes relayed
- * each packet, supports LRU-style eviction, and detects fallback-to-
- * flooding and hop-limit upgrades.
- */
-
-#include "PacketHistory.h"
-
-#include "TestUtil.h"
-#include <unity.h>
-
-// ---------------------------------------------------------------------------
-// Constants
-// ---------------------------------------------------------------------------
-static constexpr uint32_t OUR_NODE_NUM = 0xDEAD1234;
-static constexpr uint8_t OUR_RELAY_ID = 0x34; // getLastByteOfNodeNum(OUR_NODE_NUM)
-static constexpr uint32_t SMALL_CAPACITY = 8;
-
-// ---------------------------------------------------------------------------
-// Per-test state
-// ---------------------------------------------------------------------------
-static PacketHistory *ph = nullptr;
-
-// ---------------------------------------------------------------------------
-// Helpers
-// ---------------------------------------------------------------------------
-static meshtastic_MeshPacket makePacket(uint32_t from, uint32_t id, uint8_t hop_limit = 3,
-                                        uint8_t next_hop = NO_NEXT_HOP_PREFERENCE, uint8_t relay_node = 0)
-{
-    meshtastic_MeshPacket p = meshtastic_MeshPacket_init_zero;
-    p.from = from;
-    p.id = id;
-    p.hop_limit = hop_limit;
-    p.next_hop = next_hop;
-    p.relay_node = relay_node;
-    return p;
-}
-
-// ---------------------------------------------------------------------------
-// setUp / tearDown — called before and after every test
-// ---------------------------------------------------------------------------
-void setUp(void)
-{
-    myNodeInfo.my_node_num = OUR_NODE_NUM;
-    ph = new PacketHistory(SMALL_CAPACITY);
-}
-
-void tearDown(void)
-{
-    delete ph;
-    ph = nullptr;
-}
-
-// ===========================================================================
-// Group 1 — Initialization
-// ===========================================================================
-
-void test_init_valid_size(void)
-{
-    PacketHistory h(8);
-    TEST_ASSERT_TRUE(h.initOk());
-}
-
-void test_init_minimum_size(void)
-{
-    PacketHistory h(4);
-    TEST_ASSERT_TRUE(h.initOk());
-}
-
-void test_init_too_small_falls_back(void)
-{
-    // Sizes < 4 or > PACKETHISTORY_MAX are clamped to PACKETHISTORY_MAX inside the constructor
-    PacketHistory h(2);
-    TEST_ASSERT_TRUE(h.initOk());
-}
-
-// ===========================================================================
-// Group 2 — Basic Deduplication
-// ===========================================================================
-
-void test_first_packet_not_seen(void)
-{
-    auto p = makePacket(0x1111, 100);
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p));
-}
-
-void test_same_packet_seen_twice(void)
-{
-    auto p = makePacket(0x1111, 100);
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p)); // first time
-    TEST_ASSERT_TRUE(ph->wasSeenRecently(&p));  // duplicate
-}
-
-void test_different_id_not_confused(void)
-{
-    auto p1 = makePacket(0x1111, 100);
-    auto p2 = makePacket(0x1111, 200);
-    ph->wasSeenRecently(&p1);
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p2));
-}
-
-void test_different_sender_not_confused(void)
-{
-    auto p1 = makePacket(0x1111, 100);
-    auto p2 = makePacket(0x2222, 100);
-    ph->wasSeenRecently(&p1);
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p2));
-}
-
-void test_withUpdate_false_no_insert(void)
-{
-    auto p = makePacket(0x1111, 100);
-    // First call with withUpdate=false: should not store
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p, /*withUpdate=*/false));
-    // Second call with withUpdate=true: still not found because first didn't store
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p, /*withUpdate=*/true));
-}
-
-void test_withUpdate_true_inserts(void)
-{
-    auto p = makePacket(0x1111, 100);
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p, /*withUpdate=*/true));
-    TEST_ASSERT_TRUE(ph->wasSeenRecently(&p, /*withUpdate=*/false)); // found without inserting again
-}
-
-// ===========================================================================
-// Group 3 — LRU Eviction
-// ===========================================================================
-
-void test_fill_capacity_all_found(void)
-{
-    for (uint32_t i = 1; i <= SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xAAAA, i);
-        ph->wasSeenRecently(&p);
-    }
-    // All 8 should be found
-    for (uint32_t i = 1; i <= SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xAAAA, i);
-        TEST_ASSERT_TRUE(ph->wasSeenRecently(&p, false));
-    }
-}
-
-void test_eviction_oldest_replaced(void)
-{
-    // Fill all 8 slots
-    for (uint32_t i = 1; i <= SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xAAAA, i);
-        ph->wasSeenRecently(&p);
-    }
-
-    // Advance time so the eviction logic can distinguish "oldest" from "newest".
-    // insert() uses (now_millis - rxTimeMsec) > OldtrxTimeMsec with strict >, so
-    // entries with identical timestamps all have age 0 and none gets selected.
-    delay(1);
-
-    // Insert a 9th packet — should evict the oldest
-    auto p9 = makePacket(0xAAAA, 9);
-    ph->wasSeenRecently(&p9);
-
-    // The 9th should be found
-    TEST_ASSERT_TRUE(ph->wasSeenRecently(&p9, false));
-
-    // At least one of the originals should have been evicted
-    int evicted = 0;
-    for (uint32_t i = 1; i <= SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xAAAA, i);
-        if (!ph->wasSeenRecently(&p, false))
-            evicted++;
-    }
-    TEST_ASSERT_TRUE(evicted > 0);
-}
-
-void test_matching_slot_reused(void)
-{
-    // Insert packet, then re-insert same (sender, id) — should reuse slot, not evict others
-    auto p1 = makePacket(0xAAAA, 1);
-    auto p2 = makePacket(0xBBBB, 2);
-    ph->wasSeenRecently(&p1);
-    ph->wasSeenRecently(&p2);
-
-    // Re-observe p1 (triggers merge path)
-    ph->wasSeenRecently(&p1);
-
-    // Both should still be present
-    TEST_ASSERT_TRUE(ph->wasSeenRecently(&p1, false));
-    TEST_ASSERT_TRUE(ph->wasSeenRecently(&p2, false));
-}
-
-void test_free_slot_preferred(void)
-{
-    // Insert 4 packets into capacity-8 history — next insert should use a free slot, not evict
-    for (uint32_t i = 1; i <= 4; i++) {
-        auto p = makePacket(0xAAAA, i);
-        ph->wasSeenRecently(&p);
-    }
-    auto p5 = makePacket(0xAAAA, 5);
-    ph->wasSeenRecently(&p5);
-
-    // All 5 should be present (no eviction needed)
-    for (uint32_t i = 1; i <= 5; i++) {
-        auto p = makePacket(0xAAAA, i);
-        TEST_ASSERT_TRUE(ph->wasSeenRecently(&p, false));
-    }
-}
-
-void test_evict_all_old_packets(void)
-{
-    // Fill with packets 1..8
-    for (uint32_t i = 1; i <= SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xAAAA, i);
-        ph->wasSeenRecently(&p);
-    }
-
-    // Advance time so the replacement batch can evict the originals
-    delay(1);
-
-    // Replace all with packets 101..108
-    for (uint32_t i = 101; i <= 100 + SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xBBBB, i);
-        ph->wasSeenRecently(&p);
-    }
-    // None of the originals should be found
-    for (uint32_t i = 1; i <= SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xAAAA, i);
-        TEST_ASSERT_FALSE(ph->wasSeenRecently(&p, false));
-    }
-    // All new ones should be found
-    for (uint32_t i = 101; i <= 100 + SMALL_CAPACITY; i++) {
-        auto p = makePacket(0xBBBB, i);
-        TEST_ASSERT_TRUE(ph->wasSeenRecently(&p, false));
-    }
-}
-
-// ===========================================================================
-// Group 4 — Relayer Tracking
-// ===========================================================================
-
-void test_wasRelayer_true(void)
-{
-    // Non-us relay_nodes only enter relayed_by[] through the "heard-back" merge path:
-    // we must have relayed first, then observe the packet return at hop_limit-1.
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-
-    // Heard-back from 0xCC at hop_limit=2 (ourTxHopLimit-1) triggers the merge
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xCC);
-    ph->wasSeenRecently(&p2);
-
-    TEST_ASSERT_TRUE(ph->wasRelayer(0xCC, 100, 0x1111));
-}
-
-void test_wasRelayer_false(void)
-{
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, 0xAA);
-    ph->wasSeenRecently(&p);
-    // 0xCC was never a relayer
-    TEST_ASSERT_FALSE(ph->wasRelayer(0xCC, 100, 0x1111));
-}
-
-void test_wasRelayer_zero_returns_false(void)
-{
-    auto p = makePacket(0x1111, 100);
-    ph->wasSeenRecently(&p);
-    TEST_ASSERT_FALSE(ph->wasRelayer(0, 100, 0x1111));
-}
-
-void test_wasRelayer_not_found(void)
-{
-    // Packet not in history at all
-    TEST_ASSERT_FALSE(ph->wasRelayer(0xAA, 999, 0x9999));
-}
-
-void test_wasRelayer_wasSole_true(void)
-{
-    // relay_node = ourRelayID → relayed_by[0] = ourRelayID
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p);
-
-    bool wasSole = false;
-    bool result = ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111, &wasSole);
-    TEST_ASSERT_TRUE(result);
-    TEST_ASSERT_TRUE(wasSole);
-}
-
-void test_wasRelayer_wasSole_false(void)
-{
-    // First observation: we relay
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-
-    // Second observation: different relayer adds to record
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xBB);
-    ph->wasSeenRecently(&p2);
-
-    bool wasSole = true;
-    bool result = ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111, &wasSole);
-    TEST_ASSERT_TRUE(result);
-    TEST_ASSERT_FALSE(wasSole);
-}
-
-void test_wasRelayer_all_six_slots(void)
-{
-    // First observation: we relay with hop_limit=3 (fills slot 0, ourTxHopLimit=3)
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p);
-
-    // Each heard-back must satisfy: hop_limit == ourTxHopLimit OR ourTxHopLimit-1.
-    // Using hop_limit=2 (ourTxHopLimit-1) for all, which triggers the heard-back
-    // merge path each time. Each new relay_node pushes to slot 0 and shifts existing
-    // relayers right, eventually filling all NUM_RELAYERS(6) slots.
-    uint8_t relayers[] = {0x11, 0x22, 0x33, 0x44, 0x55};
-    for (int i = 0; i < 5; i++) {
-        auto pn = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, relayers[i]);
-        ph->wasSeenRecently(&pn);
-    }
-
-    // All 6 should be detected
-    TEST_ASSERT_TRUE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-    for (int i = 0; i < 5; i++) {
-        TEST_ASSERT_TRUE(ph->wasRelayer(relayers[i], 100, 0x1111));
-    }
-}
-
-// ===========================================================================
-// Group 5 — removeRelayer
-// ===========================================================================
-
-void test_removeRelayer_removes(void)
-{
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-    TEST_ASSERT_TRUE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-
-    ph->removeRelayer(OUR_RELAY_ID, 100, 0x1111);
-    TEST_ASSERT_FALSE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-}
-
-void test_removeRelayer_compacts(void)
-{
-    // We relay first
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-    // Second relayer
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xBB);
-    ph->wasSeenRecently(&p2);
-
-    // Remove us, 0xBB should still be found
-    ph->removeRelayer(OUR_RELAY_ID, 100, 0x1111);
-    TEST_ASSERT_FALSE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-    TEST_ASSERT_TRUE(ph->wasRelayer(0xBB, 100, 0x1111));
-}
-
-void test_removeRelayer_nonexistent_safe(void)
-{
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p);
-    // Removing a relayer that doesn't exist should not crash
-    ph->removeRelayer(0xFF, 100, 0x1111);
-    // Original should still be there
-    TEST_ASSERT_TRUE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-}
-
-void test_removeRelayer_packet_not_found_safe(void)
-{
-    // Packet not in history — should not crash
-    ph->removeRelayer(0xAA, 999, 0x9999);
-}
-
-// ===========================================================================
-// Group 6 — checkRelayers
-// ===========================================================================
-
-void test_checkRelayers_both_found(void)
-{
-    // We relay first
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-    // Second relayer
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xBB);
-    ph->wasSeenRecently(&p2);
-
-    bool r1 = false, r2 = false;
-    ph->checkRelayers(OUR_RELAY_ID, 0xBB, 100, 0x1111, &r1, &r2);
-    TEST_ASSERT_TRUE(r1);
-    TEST_ASSERT_TRUE(r2);
-}
-
-void test_checkRelayers_one_found(void)
-{
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p);
-
-    bool r1 = false, r2 = false;
-    ph->checkRelayers(OUR_RELAY_ID, 0xCC, 100, 0x1111, &r1, &r2);
-    TEST_ASSERT_TRUE(r1);
-    TEST_ASSERT_FALSE(r2);
-}
-
-void test_checkRelayers_r2WasSole(void)
-{
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p);
-
-    bool r1 = false, r2 = false, r2Sole = false;
-    // relayer1=0xCC (not found), relayer2=OUR_RELAY_ID (sole relayer)
-    ph->checkRelayers(0xCC, OUR_RELAY_ID, 100, 0x1111, &r1, &r2, &r2Sole);
-    TEST_ASSERT_FALSE(r1);
-    TEST_ASSERT_TRUE(r2);
-    TEST_ASSERT_TRUE(r2Sole);
-}
-
-// ===========================================================================
-// Group 7 — wasSeenRecently Merge Logic
-// ===========================================================================
-
-void test_merge_preserves_original_next_hop(void)
-{
-    // First observation with next_hop=0x55
-    auto p1 = makePacket(0x1111, 100, 3, 0x55, 0xAA);
-    ph->wasSeenRecently(&p1);
-
-    // Re-observation with different next_hop
-    auto p2 = makePacket(0x1111, 100, 2, 0x77, 0xBB);
-    ph->wasSeenRecently(&p2);
-
-    // The stored next_hop should still be 0x55 (the original)
-    // We verify via weWereNextHop: if we set original next_hop to ourRelayID, it should detect it
-    auto p3 = makePacket(0x1111, 200, 3, OUR_RELAY_ID, 0xAA);
-    ph->wasSeenRecently(&p3);
-    auto p4 = makePacket(0x1111, 200, 2, 0x99, 0xBB);
-    bool weWereNextHop = false;
-    ph->wasSeenRecently(&p4, true, nullptr, &weWereNextHop);
-    TEST_ASSERT_TRUE(weWereNextHop);
-}
-
-void test_merge_preserves_highest_hop_limit(void)
-{
-    // First observation with hop_limit=5
-    auto p1 = makePacket(0x1111, 100, 5);
-    ph->wasSeenRecently(&p1);
-
-    // Re-observation with hop_limit=2 (lower)
-    auto p2 = makePacket(0x1111, 100, 2);
-    ph->wasSeenRecently(&p2);
-
-    // Third observation with hop_limit=3 should not trigger upgrade (highest was 5)
-    bool wasUpgraded = true;
-    auto p3 = makePacket(0x1111, 100, 3);
-    ph->wasSeenRecently(&p3, true, nullptr, nullptr, &wasUpgraded);
-    TEST_ASSERT_FALSE(wasUpgraded);
-}
-
-void test_merge_no_duplicate_relayers(void)
-{
-    // Observe with relayer 0xAA (stored via relay_node, but only slot 0 for ourRelayID)
-    // We need to use ourRelayID for the first observation to get it into slot 0
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-
-    // Re-observe with same relay_node=ourRelayID — should not create duplicates
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p2);
-
-    // ourRelayID should appear exactly once — wasSole should still be true
-    bool wasSole = false;
-    TEST_ASSERT_TRUE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111, &wasSole));
-    TEST_ASSERT_TRUE(wasSole);
-}
-
-void test_merge_adds_new_relayer(void)
-{
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xBB);
-    ph->wasSeenRecently(&p2);
-
-    TEST_ASSERT_TRUE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-    TEST_ASSERT_TRUE(ph->wasRelayer(0xBB, 100, 0x1111));
-}
-
-void test_merge_we_relay_sets_slot_zero(void)
-{
-    // When relay_node == ourRelayID, relayed_by[0] should be set to ourRelayID
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p);
-
-    TEST_ASSERT_TRUE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-}
-
-void test_merge_heard_back_stores_relay_node(void)
-{
-    // First: we relay (hop_limit=3)
-    auto p1 = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-
-    // Second: we hear the packet back with hop_limit=2 (one less), from relay_node=0xCC
-    // This triggers the "heard back" logic: weWereRelayer && hop_limit == ourTxHopLimit-1
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xCC);
-    ph->wasSeenRecently(&p2);
-
-    TEST_ASSERT_TRUE(ph->wasRelayer(OUR_RELAY_ID, 100, 0x1111));
-    TEST_ASSERT_TRUE(ph->wasRelayer(0xCC, 100, 0x1111));
-}
-
-// ===========================================================================
-// Group 8 — Fallback-to-Flooding Detection
-// ===========================================================================
-
-void test_fallback_detected(void)
-{
-    // The fallback condition requires wasRelayer(relay_node) && !wasRelayer(ourRelayID).
-    // Non-us relayers only enter relayed_by[] via the heard-back merge path, which
-    // also stores ourRelayID. So we must removeRelayer(ourRelayID) to satisfy both.
-    //
-    // Scenario: we relay a directed packet, hear it back from 0xAA, then the router
-    // removes us from the relayer list. Later the sender falls back to flooding.
-
-    // Step 1: We relay (directed to next_hop=0x55)
-    auto p1 = makePacket(0x1111, 100, 3, 0x55, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-
-    // Step 2: Heard-back from 0xAA at hop_limit-1 → stores 0xAA in relayed_by
-    auto p2 = makePacket(0x1111, 100, 2, 0x55, 0xAA);
-    ph->wasSeenRecently(&p2);
-
-    // Step 3: Router removes us from the relayer list
-    ph->removeRelayer(OUR_RELAY_ID, 100, 0x1111);
-
-    // Step 4: Sender falls back to flooding — same packet, NO_NEXT_HOP_PREFERENCE, from 0xAA
-    auto p3 = makePacket(0x1111, 100, 1, NO_NEXT_HOP_PREFERENCE, 0xAA);
-    bool wasFallback = false;
-    ph->wasSeenRecently(&p3, true, &wasFallback);
-    TEST_ASSERT_TRUE(wasFallback);
-}
-
-void test_fallback_not_when_we_relayed(void)
-{
-    // First observation: directed, we relayed it
-    auto p1 = makePacket(0x1111, 100, 3, 0x55, OUR_RELAY_ID);
-    ph->wasSeenRecently(&p1);
-
-    // Second observation: fallback to flooding from same relayer (us)
-    // But since we already relayed, wasFallback should be false
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, OUR_RELAY_ID);
-    bool wasFallback = false;
-    ph->wasSeenRecently(&p2, true, &wasFallback);
-    TEST_ASSERT_FALSE(wasFallback);
-}
-
-void test_fallback_not_on_first_observation(void)
-{
-    // First time seen — can't be a fallback
-    auto p = makePacket(0x1111, 100, 3, NO_NEXT_HOP_PREFERENCE, 0xAA);
-    bool wasFallback = false;
-    ph->wasSeenRecently(&p, true, &wasFallback);
-    TEST_ASSERT_FALSE(wasFallback);
-}
-
-// ===========================================================================
-// Group 9 — Next-Hop and Upgrade Detection
-// ===========================================================================
-
-void test_weWereNextHop_true(void)
-{
-    // Packet directed to us (next_hop = ourRelayID)
-    auto p1 = makePacket(0x1111, 100, 3, OUR_RELAY_ID, 0xAA);
-    ph->wasSeenRecently(&p1);
-
-    // Re-observe: check if we were the original next_hop
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xBB);
-    bool weWereNextHop = false;
-    ph->wasSeenRecently(&p2, true, nullptr, &weWereNextHop);
-    TEST_ASSERT_TRUE(weWereNextHop);
-}
-
-void test_weWereNextHop_false(void)
-{
-    // Packet directed to someone else
-    auto p1 = makePacket(0x1111, 100, 3, 0x99, 0xAA);
-    ph->wasSeenRecently(&p1);
-
-    auto p2 = makePacket(0x1111, 100, 2, NO_NEXT_HOP_PREFERENCE, 0xBB);
-    bool weWereNextHop = false;
-    ph->wasSeenRecently(&p2, true, nullptr, &weWereNextHop);
-    TEST_ASSERT_FALSE(weWereNextHop);
-}
-
-void test_wasUpgraded_true(void)
-{
-    // First observation with hop_limit=3 → stored as highestHopLimit bits 0-2 = 3
-    auto p1 = makePacket(0x1111, 100, 3);
-    ph->wasSeenRecently(&p1);
-
-    // Re-observation with hop_limit=5
-    // The upgrade check on line 122 compares the raw packed byte found->hop_limit against p->hop_limit.
-    // found->hop_limit has highestHopLimit=3 in bits 0-2 (and possibly ourTxHopLimit in bits 3-5).
-    // So the packed byte value is 3 (or more if ourTxHopLimit was set), and p->hop_limit is 5.
-    // Since 3 < 5 (with no ourTxHopLimit set), this should detect an upgrade.
-    auto p2 = makePacket(0x1111, 100, 5);
-    bool wasUpgraded = false;
-    ph->wasSeenRecently(&p2, true, nullptr, nullptr, &wasUpgraded);
-    TEST_ASSERT_TRUE(wasUpgraded);
-}
-
-void test_wasUpgraded_false(void)
-{
-    auto p1 = makePacket(0x1111, 100, 5);
-    ph->wasSeenRecently(&p1);
-
-    // Same or lower hop_limit
-    auto p2 = makePacket(0x1111, 100, 3);
-    bool wasUpgraded = false;
-    ph->wasSeenRecently(&p2, true, nullptr, nullptr, &wasUpgraded);
-    TEST_ASSERT_FALSE(wasUpgraded);
-}
-
-// ===========================================================================
-// Group 10 — Edge Cases
-// ===========================================================================
-
-void test_packet_id_zero_not_stored(void)
-{
-    auto p = makePacket(0x1111, 0);
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p));
-    TEST_ASSERT_FALSE(ph->wasSeenRecently(&p)); // still not found
-}
-
-void test_sender_zero_substituted(void)
-{
-    // from=0 means "from us" — getFrom() substitutes nodeDB->getNodeNum()
-    auto p = makePacket(0, 100);
-    ph->wasSeenRecently(&p);
-
-    // Should be stored under our node num, not 0
-    auto p2 = makePacket(OUR_NODE_NUM, 100);
-    TEST_ASSERT_TRUE(ph->wasSeenRecently(&p2, false));
-}
-
-void test_uninitialized_wasSeenRecently(void)
-{
-    // Simulate uninitialized state — create a PacketHistory that looks uninitialized
-    // We can't easily make allocation fail, but we can test the initOk guard with a destructed one
-    PacketHistory h(4);
-    TEST_ASSERT_TRUE(h.initOk()); // sanity check
-    h.~PacketHistory();
-
-    auto p = makePacket(0x1111, 100);
-    TEST_ASSERT_FALSE(h.wasSeenRecently(&p));
-
-    // Reconstruct in place to allow proper destruction
-    new (&h) PacketHistory(4);
-}
-
-void test_uninitialized_wasRelayer(void)
-{
-    PacketHistory h(4);
-    h.~PacketHistory();
-
-    TEST_ASSERT_FALSE(h.wasRelayer(0xAA, 100, 0x1111));
-
-    new (&h) PacketHistory(4);
-}
-
-void test_multiple_instances_independent(void)
-{
-    PacketHistory h2(SMALL_CAPACITY);
-
-    auto p = makePacket(0x1111, 100);
-    ph->wasSeenRecently(&p);
-
-    // h2 should NOT find it
-    TEST_ASSERT_FALSE(h2.wasSeenRecently(&p, false));
-
-    // ph should still find it
-    TEST_ASSERT_TRUE(ph->wasSeenRecently(&p, false));
-}
-
-// ===========================================================================
-// Group 11 — Hash Table Stress
-// ===========================================================================
-
-void test_many_packets_no_false_negatives(void)
-{
-    PacketHistory big(64);
-    for (uint32_t i = 1; i <= 64; i++) {
-        auto p = makePacket(0xAAAA, i);
-        big.wasSeenRecently(&p);
-    }
-    for (uint32_t i = 1; i <= 64; i++) {
-        auto p = makePacket(0xAAAA, i);
-        TEST_ASSERT_TRUE_MESSAGE(big.wasSeenRecently(&p, false), "False negative in hash table");
-    }
-}
-
-void test_many_packets_no_false_positives(void)
-{
-    PacketHistory big(64);
-    for (uint32_t i = 1; i <= 64; i++) {
-        auto p = makePacket(0xAAAA, i);
-        big.wasSeenRecently(&p);
-    }
-    // IDs 65..128 were never inserted
-    for (uint32_t i = 65; i <= 128; i++) {
-        auto p = makePacket(0xAAAA, i);
-        TEST_ASSERT_FALSE_MESSAGE(big.wasSeenRecently(&p, false), "False positive in hash table");
-    }
-}
-
-void test_churn_correctness(void)
-{
-    // Insert 3x capacity to force heavy eviction.
-    // Advance time between each generation so eviction can distinguish old from new.
-    PacketHistory big(32);
-    uint32_t capacity = 32;
-    uint32_t generations = 3;
-
-    for (uint32_t gen = 0; gen < generations; gen++) {
-        if (gen > 0)
-            delay(1); // Ensure new generation has a newer timestamp than the old
-        for (uint32_t i = 1; i <= capacity; i++) {
-            auto p = makePacket(0xAAAA, gen * capacity + i);
-            big.wasSeenRecently(&p);
-        }
-    }
-
-    uint32_t total = capacity * generations;
-
-    // Only the most recent 32 should be present (due to LRU eviction)
-    for (uint32_t i = total - 31; i <= total; i++) {
-        auto p = makePacket(0xAAAA, i);
-        TEST_ASSERT_TRUE_MESSAGE(big.wasSeenRecently(&p, false), "Recent packet lost after churn");
-    }
-    // Older packets should be gone
-    int found = 0;
-    for (uint32_t i = 1; i <= total - capacity; i++) {
-        auto p = makePacket(0xAAAA, i);
-        if (big.wasSeenRecently(&p, false))
-            found++;
-    }
-    TEST_ASSERT_EQUAL_INT_MESSAGE(0, found, "Evicted packets should not be found");
-}
-
-// ===========================================================================
-// Test runner
-// ===========================================================================
-
-void setup()
-{
-    delay(10);
-    delay(2000);
-
-    initializeTestEnvironment();
-    UNITY_BEGIN();
-
-    // Group 1 — Initialization
-    RUN_TEST(test_init_valid_size);
-    RUN_TEST(test_init_minimum_size);
-    RUN_TEST(test_init_too_small_falls_back);
-
-    // Group 2 — Basic Deduplication
-    RUN_TEST(test_first_packet_not_seen);
-    RUN_TEST(test_same_packet_seen_twice);
-    RUN_TEST(test_different_id_not_confused);
-    RUN_TEST(test_different_sender_not_confused);
-    RUN_TEST(test_withUpdate_false_no_insert);
-    RUN_TEST(test_withUpdate_true_inserts);
-
-    // Group 3 — LRU Eviction
-    RUN_TEST(test_fill_capacity_all_found);
-    RUN_TEST(test_eviction_oldest_replaced);
-    RUN_TEST(test_matching_slot_reused);
-    RUN_TEST(test_free_slot_preferred);
-    RUN_TEST(test_evict_all_old_packets);
-
-    // Group 4 — Relayer Tracking
-    RUN_TEST(test_wasRelayer_true);
-    RUN_TEST(test_wasRelayer_false);
-    RUN_TEST(test_wasRelayer_zero_returns_false);
-    RUN_TEST(test_wasRelayer_not_found);
-    RUN_TEST(test_wasRelayer_wasSole_true);
-    RUN_TEST(test_wasRelayer_wasSole_false);
-    RUN_TEST(test_wasRelayer_all_six_slots);
-
-    // Group 5 — removeRelayer
-    RUN_TEST(test_removeRelayer_removes);
-    RUN_TEST(test_removeRelayer_compacts);
-    RUN_TEST(test_removeRelayer_nonexistent_safe);
-    RUN_TEST(test_removeRelayer_packet_not_found_safe);
-
-    // Group 6 — checkRelayers
-    RUN_TEST(test_checkRelayers_both_found);
-    RUN_TEST(test_checkRelayers_one_found);
-    RUN_TEST(test_checkRelayers_r2WasSole);
-
-    // Group 7 — Merge Logic
-    RUN_TEST(test_merge_preserves_original_next_hop);
-    RUN_TEST(test_merge_preserves_highest_hop_limit);
-    RUN_TEST(test_merge_no_duplicate_relayers);
-    RUN_TEST(test_merge_adds_new_relayer);
-    RUN_TEST(test_merge_we_relay_sets_slot_zero);
-    RUN_TEST(test_merge_heard_back_stores_relay_node);
-
-    // Group 8 — Fallback-to-Flooding Detection
-    RUN_TEST(test_fallback_detected);
-    RUN_TEST(test_fallback_not_when_we_relayed);
-    RUN_TEST(test_fallback_not_on_first_observation);
-
-    // Group 9 — Next-Hop and Upgrade Detection
-    RUN_TEST(test_weWereNextHop_true);
-    RUN_TEST(test_weWereNextHop_false);
-    RUN_TEST(test_wasUpgraded_true);
-    RUN_TEST(test_wasUpgraded_false);
-
-    // Group 10 — Edge Cases
-    RUN_TEST(test_packet_id_zero_not_stored);
-    RUN_TEST(test_sender_zero_substituted);
-    RUN_TEST(test_uninitialized_wasSeenRecently);
-    RUN_TEST(test_uninitialized_wasRelayer);
-    RUN_TEST(test_multiple_instances_independent);
-
-    // Group 11 — Hash Table Stress
-    RUN_TEST(test_many_packets_no_false_negatives);
-    RUN_TEST(test_many_packets_no_false_positives);
-    RUN_TEST(test_churn_correctness);
-
-    exit(UNITY_END());
-}
-
-void loop() {}

test/test_radio/test_main.cpp

@@ -1,36 +1,10 @@
 #include "MeshRadio.h"
-#include "MeshService.h"
 #include "RadioInterface.h"
 #include "TestUtil.h"
 #include <unity.h>
 
 #include "meshtastic/config.pb.h"
 
-class MockMeshService : public MeshService
-{
-  public:
-    void sendClientNotification(meshtastic_ClientNotification *n) override { releaseClientNotificationToPool(n); }
-};
-
-static MockMeshService *mockMeshService;
-
-// Test shim to expose protected radio parameters set by applyModemConfig()
-class TestableRadioInterface : public RadioInterface
-{
-  public:
-    TestableRadioInterface() : RadioInterface() {}
-    uint8_t getCr() const { return cr; }
-    uint8_t getSf() const { return sf; }
-    float getBw() const { return bw; }
-
-    // Override reconfigure to call the base which invokes applyModemConfig()
-    bool reconfigure() override { return RadioInterface::reconfigure(); }
-
-    // Stubs for pure virtual methods required by RadioInterface
-    uint32_t getPacketTime(uint32_t, bool) override { return 0; }
-    ErrorCode send(meshtastic_MeshPacket *p) override { return ERRNO_OK; }
-};
-
 static void test_bwCodeToKHz_specialMappings()
 {
     TEST_ASSERT_FLOAT_WITHIN(0.0001f, 31.25f, bwCodeToKHz(31));
@@ -47,7 +21,7 @@ static void test_bwCodeToKHz_passthrough()
     TEST_ASSERT_FLOAT_WITHIN(0.0001f, 250.0f, bwCodeToKHz(250));
 }
 
-static void test_validateConfigLora_noopWhenUsePresetFalse()
+static void test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse()
 {
     meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
     cfg.use_preset = false;
@@ -56,152 +30,55 @@ static void test_validateConfigLora_noopWhenUsePresetFalse()
     cfg.bandwidth = 123;
     cfg.spread_factor = 8;
 
-    RadioInterface::validateConfigLora(cfg);
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
 
     TEST_ASSERT_EQUAL_UINT16(123, cfg.bandwidth);
     TEST_ASSERT_EQUAL_UINT32(8, cfg.spread_factor);
     TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST, cfg.modem_preset);
 }
 
-static void test_validateConfigLora_validPreset_nonWideRegion()
+static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion()
 {
     meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
     cfg.use_preset = true;
     cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
     cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
 
-    TEST_ASSERT_TRUE(RadioInterface::validateConfigLora(cfg));
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
 }
 
-static void test_validateConfigLora_validPreset_wideRegion()
+static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion()
 {
     meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
     cfg.use_preset = true;
     cfg.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24;
     cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
 
-    TEST_ASSERT_TRUE(RadioInterface::validateConfigLora(cfg));
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(800, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
 }
 
-static void test_validateConfigLora_rejectsInvalidPresetForRegion()
+static void test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan()
 {
     meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
     cfg.use_preset = true;
     cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
     cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
 
-    TEST_ASSERT_FALSE(RadioInterface::validateConfigLora(cfg));
-}
-
-static void test_clampConfigLora_invalidPresetClampedToDefault()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.use_preset = true;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-
-    RadioInterface::clampConfigLora(cfg);
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
 
     TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, cfg.modem_preset);
+    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(11, cfg.spread_factor);
 }
 
-static void test_clampConfigLora_validPresetUnchanged()
-{
-    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
-    cfg.use_preset = true;
-    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-
-    RadioInterface::clampConfigLora(cfg);
-
-    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST, cfg.modem_preset);
-}
-
-// -----------------------------------------------------------------------
-// applyModemConfig() coding rate tests (via reconfigure)
-// -----------------------------------------------------------------------
-
-static TestableRadioInterface *testRadio;
-
-// After fresh flash: coding_rate=0, use_preset=true, modem_preset=LONG_FAST
-// CR should come from the preset (5 for LONG_FAST), not from the zero default.
-static void test_applyModemConfig_freshFlashCodingRateNotZero()
-{
-    config.lora = meshtastic_Config_LoRaConfig_init_zero;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    config.lora.use_preset = true;
-    config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-    // coding_rate is 0 (default after init_zero, same as fresh flash)
-
-    testRadio->reconfigure();
-
-    // LONG_FAST preset has cr=5; must never be 0
-    TEST_ASSERT_EQUAL_UINT8(5, testRadio->getCr());
-    TEST_ASSERT_EQUAL_UINT8(11, testRadio->getSf());
-    TEST_ASSERT_FLOAT_WITHIN(0.01f, 250.0f, testRadio->getBw());
-}
-
-// When coding_rate matches the preset exactly, should still use the preset value
-static void test_applyModemConfig_codingRateMatchesPreset()
-{
-    config.lora = meshtastic_Config_LoRaConfig_init_zero;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    config.lora.use_preset = true;
-    config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW;
-    config.lora.coding_rate = 8; // LONG_SLOW default is cr=8
-
-    testRadio->reconfigure();
-
-    TEST_ASSERT_EQUAL_UINT8(8, testRadio->getCr());
-}
-
-// Custom CR higher than preset should be used
-static void test_applyModemConfig_customCodingRateHigherThanPreset()
-{
-    config.lora = meshtastic_Config_LoRaConfig_init_zero;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    config.lora.use_preset = true;
-    config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-    config.lora.coding_rate = 7; // LONG_FAST preset has cr=5, 7 > 5
-
-    testRadio->reconfigure();
-
-    TEST_ASSERT_EQUAL_UINT8(7, testRadio->getCr());
-}
-
-// Custom CR lower than preset: preset wins (higher is more robust)
-static void test_applyModemConfig_customCodingRateLowerThanPreset()
-{
-    config.lora = meshtastic_Config_LoRaConfig_init_zero;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    config.lora.use_preset = true;
-    config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW;
-    config.lora.coding_rate = 5; // LONG_SLOW preset has cr=8, 5 < 8
-
-    testRadio->reconfigure();
-
-    TEST_ASSERT_EQUAL_UINT8(8, testRadio->getCr());
-}
-
-void setUp(void)
-{
-    mockMeshService = new MockMeshService();
-    service = mockMeshService;
-
-    // RadioInterface computes slotTimeMsec during construction and expects myRegion to be valid.
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    initRegion();
-
-    testRadio = new TestableRadioInterface();
-}
-void tearDown(void)
-{
-    delete testRadio;
-    testRadio = nullptr;
-    service = nullptr;
-    delete mockMeshService;
-    mockMeshService = nullptr;
-}
+void setUp(void) {}
+void tearDown(void) {}
 
 void setup()
 {
@@ -213,16 +90,10 @@ void setup()
     UNITY_BEGIN();
     RUN_TEST(test_bwCodeToKHz_specialMappings);
     RUN_TEST(test_bwCodeToKHz_passthrough);
-    RUN_TEST(test_validateConfigLora_noopWhenUsePresetFalse);
-    RUN_TEST(test_validateConfigLora_validPreset_nonWideRegion);
-    RUN_TEST(test_validateConfigLora_validPreset_wideRegion);
-    RUN_TEST(test_validateConfigLora_rejectsInvalidPresetForRegion);
-    RUN_TEST(test_clampConfigLora_invalidPresetClampedToDefault);
-    RUN_TEST(test_clampConfigLora_validPresetUnchanged);
-    RUN_TEST(test_applyModemConfig_freshFlashCodingRateNotZero);
-    RUN_TEST(test_applyModemConfig_codingRateMatchesPreset);
-    RUN_TEST(test_applyModemConfig_customCodingRateHigherThanPreset);
-    RUN_TEST(test_applyModemConfig_customCodingRateLowerThanPreset);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan);
     exit(UNITY_END());
 }
 

test/test_utf8/test_main.cpp

@@ -0,0 +1,195 @@
+#include "meshUtils.h"
+#include <cstring>
+#include <unity.h>
+
+void setUp(void) {}
+void tearDown(void) {}
+
+// --- Valid UTF-8 should pass through unchanged ---
+
+void test_ascii_unchanged()
+{
+    char buf[32] = "Hello World";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("Hello World", buf);
+}
+
+void test_valid_2byte_unchanged()
+{
+    // "café" — é is C3 A9
+    char buf[16] = "caf\xC3\xA9";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("caf\xC3\xA9", buf);
+}
+
+void test_valid_3byte_unchanged()
+{
+    // "€" is E2 82 AC
+    char buf[16] = "\xE2\x82\xAC";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("\xE2\x82\xAC", buf);
+}
+
+void test_valid_4byte_emoji_unchanged()
+{
+    // 🌙 is F0 9F 8C 99
+    char buf[16] = "\xF0\x9F\x8C\x99";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("\xF0\x9F\x8C\x99", buf);
+}
+
+void test_valid_mixed_unchanged()
+{
+    // "Hi 🌙!" — mix of ASCII and 4-byte
+    char buf[16] = "Hi \xF0\x9F\x8C\x99!";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("Hi \xF0\x9F\x8C\x99!", buf);
+}
+
+void test_empty_string()
+{
+    char buf[8] = "";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("", buf);
+}
+
+// --- Invalid sequences observed in the wild ---
+
+void test_truncated_4byte_at_end()
+{
+    // Name with valid emoji 🌙 followed by a truncated 4-byte sequence + ASCII
+    char buf[32] = "Lunar Tower \xF0\x9F\x8C\x99\xF0\x9F\x97"
+                   "4";
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    // The 🌙 should be preserved; F0 9F 97 is an incomplete 4-byte sequence,
+    // '4' (0x34) is not a valid continuation byte
+    TEST_ASSERT_EQUAL_STRING("Lunar Tower \xF0\x9F\x8C\x99???4", buf);
+}
+
+void test_lone_lead_bytes_without_continuations()
+{
+    // Mixed ASCII with stray multibyte lead bytes (E1, F3) lacking proper continuations
+    char buf[32] = "Mesht\xE1\xF3tic 37e2";
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    // E1 expects 2 continuation bytes, but F3 is not a continuation → E1 replaced
+    // F3 expects 3 continuation bytes, 't','i','c' are not continuations → F3 replaced
+    TEST_ASSERT_EQUAL_STRING("Mesht??tic 37e2", buf);
+}
+
+// --- Edge cases ---
+
+void test_bare_continuation_byte()
+{
+    // 0x80 alone is invalid (continuation byte with no lead)
+    char buf[8] = "\x80";
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("?", buf);
+}
+
+void test_overlong_2byte()
+{
+    // C0 AF is an overlong encoding of U+002F '/'
+    char buf[8] = "\xC0\xAF";
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    // C0 is a 2-byte lead, AF is valid continuation, but codepoint 0x2F < 0x80 → overlong
+    // C0 replaced, AF (now bare continuation) also replaced
+    TEST_ASSERT_EQUAL_STRING("??", buf);
+}
+
+void test_surrogate_half()
+{
+    // ED A0 80 encodes U+D800 (surrogate half — invalid in UTF-8)
+    char buf[8] = "\xED\xA0\x80";
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("???", buf);
+}
+
+void test_5byte_sequence_rejected()
+{
+    // F8 80 80 80 80 — 5-byte sequence, not valid UTF-8
+    char buf[8] = "\xF8\x80\x80\x80\x80";
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    // F8 is invalid lead (>= 0xF8), each 0x80 is bare continuation
+    TEST_ASSERT_EQUAL_STRING("?????", buf);
+}
+
+void test_truncated_3byte_at_buffer_end()
+{
+    // Buffer is exactly 4 bytes: E2 82 then forced null at [3]
+    char buf[4];
+    buf[0] = '\xE2';
+    buf[1] = '\x82';
+    buf[2] = '\0'; // String ends before the 3-byte sequence completes
+    buf[3] = '\0';
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("??", buf);
+}
+
+void test_null_termination_enforced()
+{
+    // Fill buffer completely with no null terminator
+    char buf[5];
+    memset(buf, 'A', sizeof(buf));
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+    // Should be null-terminated and content preserved (all ASCII)
+    TEST_ASSERT_EQUAL_STRING("AAAA", buf);
+}
+
+void test_null_buffer()
+{
+    TEST_ASSERT_FALSE(sanitizeUtf8(nullptr, 10));
+}
+
+void test_zero_size()
+{
+    char buf[4] = "Hi";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, 0));
+    // Buffer should be untouched
+    TEST_ASSERT_EQUAL_STRING("Hi", buf);
+}
+
+void test_valid_max_codepoint()
+{
+    // U+10FFFF = F4 8F BF BF (maximum valid Unicode codepoint)
+    char buf[8] = "\xF4\x8F\xBF\xBF";
+    TEST_ASSERT_FALSE(sanitizeUtf8(buf, sizeof(buf)));
+    TEST_ASSERT_EQUAL_STRING("\xF4\x8F\xBF\xBF", buf);
+}
+
+void test_above_max_codepoint()
+{
+    // U+110000 = F4 90 80 80 (just above maximum valid Unicode)
+    char buf[8] = "\xF4\x90\x80\x80";
+    TEST_ASSERT_TRUE(sanitizeUtf8(buf, sizeof(buf)));
+}
+
+int main(int argc, char **argv)
+{
+    UNITY_BEGIN();
+
+    // Valid UTF-8 passthrough
+    RUN_TEST(test_ascii_unchanged);
+    RUN_TEST(test_valid_2byte_unchanged);
+    RUN_TEST(test_valid_3byte_unchanged);
+    RUN_TEST(test_valid_4byte_emoji_unchanged);
+    RUN_TEST(test_valid_mixed_unchanged);
+    RUN_TEST(test_empty_string);
+
+    // Invalid sequences observed in the wild
+    RUN_TEST(test_truncated_4byte_at_end);
+    RUN_TEST(test_lone_lead_bytes_without_continuations);
+
+    // Edge cases
+    RUN_TEST(test_bare_continuation_byte);
+    RUN_TEST(test_overlong_2byte);
+    RUN_TEST(test_surrogate_half);
+    RUN_TEST(test_5byte_sequence_rejected);
+    RUN_TEST(test_truncated_3byte_at_buffer_end);
+    RUN_TEST(test_null_termination_enforced);
+    RUN_TEST(test_null_buffer);
+    RUN_TEST(test_zero_size);
+    RUN_TEST(test_valid_max_codepoint);
+    RUN_TEST(test_above_max_codepoint);
+
+    return UNITY_END();
+}

variants/esp32/esp32-common.ini

@@ -39,6 +39,7 @@ build_flags =
   -Wall
   -Wextra
   -Isrc/platform/esp32
+  -include mbedtls/error.h
   -std=gnu++17
   -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
   -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG